Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the single zone premium wall thermostat for your Furrion Chill HE AC setup. Adjusts the temperature inside your RV or camper. 5 Operation modes ensure optimal comfort. Sleep setting cools your RV at night with minimal noise.
Features:
Specs:
California residents: click here
I was told this item would work with this thermostat (#FR33PR) would work with this controller (FACC12SA-BL) via their chat as well as on their expert replies to the questions regarding this same issue. Nope. Still got an E3 error code. The controller was brand new and just installed (and installed correctly). I tested all of the connections with my multimeter. 110v power was going to the controller and the 12v lead to the thermostat was good too. I even flipped the A & B wires as they suggest, as well as wire the thermostat directly to the controller to rule out any bad wiring throughout the trailer. Still, E3 error code. At this point, is would appear that this thermostat doesn't work with the controller or the brand new controller is dead out of the box.
I'm extremely disappointed and frustrated to say the least.
The thermostat does not read temperature accurately
Brooke M.
6/11/2025
Hey Corey! Would you be able to email me some photos of what you're looking at? Is it the AC unable to cool to the temp or are you more saying the thermostat is set for a temp and isn't kicking on?
Wasn't compatible with my trailer, but stated it was.Wasted way to much time reaching after the fact.
Gwendolyn Y.
12/11/2024
Hey Jeff. I see that you reached out to us over the weekend about the E3 error, loss of communication between control box and thermostat. Before calling Furrion you can double check your wiring to make sure that is not a damaged wire causing a bad connection. The other thing to check would be the "A" and "B" wire. We have heard of some cases of those wiring being flipped in production. If all of that checks out, I recommend reaching out to Furrion for further troubleshooting.
it does not work properly. I have to run it down to 65F to get the A/C to keep the RV art 75F.
The right parts at the right time. The customer service was excellent !
John
1/27/2025
Still like new. You folks saved the day
Just as described n delivery was on time
delivered two days early thanks
Thermostat only revealed E-3 blinking. Would not work after resetting power several times. Need to return. Grand Design.Transcend Explorer 221RB. Please send correct thermostat.
Victoria H.
11/29/2024
Hi Gregory, that is not a good experience, especially with the seasons changing. The reason that you would get an E3 error code on your thermostat would be because there was a loss in communication to the controller. When this happens, it is usually caused by wires being damaged. I do recommend double checking that the "A" and "B wires are in the correct ports. Also, there was a manufacturer error from Furrion where these were flipped so I'd double check that as well to make sure they're correct. If all that's okay, then the thermostat you received is most likely defective, and I will be happy to assist you with getting a replacement.
Delivered when promised. Good customer service
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
8/13/2024
My apologies for any misinformation that you received. I reached out to Furrion directly and the controller that this would work with it part # FR43PR. We will be in contact with you to make arrangements on a return. Please keep an eye on your email.