Recommended Trailer Hitch and Wiring for 2013 Lexus RX 350
Updated 08/28/2017 | Published 08/26/2017
Products Featured in This Question
Question:
I have a 2013 RX350 and am planning to buy a trailer hitch, I just want to make sure Im buying everything needed. tow Hitch, vehicle wiring anything else recommended? thank you!
asked by: Kevin
Expert Reply:
We have everything you need to tow a trailer with your 2013 Lexus RX 350.
Starting with the trailer hitch, I recommend the Curt Class III Receiver Hitch # C13143. This is an excellent Class III hitch that will provide a 2 inch receiver opening and has a towing weight capacity of 4,000 pounds. You will also want to check the towing capacity of your vehicle, as this will likely be your limiting factor. This information should be listed in your copy of the owner's manual. This hitch is confirmed to fit your Lexus RX 350 and will use existing holes in the vehicle frame for a no-drill installation. I have included the installation details along with a video on the 2014 RX 350 that you can use for reference.
Then for trailer wiring, if your vehicle does not have the factory tow package, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118255. This custom harness will connect to the existing ports located under the vehicle on the driver side. Once installed, you will have a 4-Way connector to hook up with a trailer and power its rear signal lights. If you will be towing a trailer with brakes, you will just need to add the Universal Wiring Kit # ETBC7. This kit will include everything needed to install a fully functional 7-Way from the existing 4-Way and a trailer brake controller. For a trailer brake controller, I highly recommend the Tekonsha Prodigy P2 # 90885.
Finally, to tow a trailer you will need a ball mount. I have attached an article that will help you determine the correct ball mount to tow your trailer level, along with a link that will take you to our available selection.
I have attached a couple of additional articles on trailer towing that you might also find helpful.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Step-By-Step Installation Tutorial for the Curt Trailer Hitch Receiver on a 2011 Lexus RX 350
- Shop: Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
- Search Results: hitch bike racks
- Search Results: trunk bike rack
- Q&A: Trailer Hitch Mount Bike Rack Recommendation for a 2011 Lexus RX 350
- Article: Rolling on a Budget: Top Wallet-Friendly Platform Bike Racks
- Article: How to Choose a Bike Rack for an SUV or Crossover
- Article: Best Bike Racks for Mountain Bikes
- Shop: Roadmaster Quiet Hitch for 2" Trailer Hitches
- Shop: Swagman XTC2 TILT Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
- Video: Detailed Breakdown of the Roadmaster Quiet Hitch for 2" Trailer Hitches
- Shop: Trailer Hitch
- Q&A: What Bike Rack Has The Most Clearance On A 2010 Lexus RX 350
- Q&A: Where to Plug in the 2011 RX 350 Trailer Hitch Wiring Harness # 56083
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Q&A: Can The Thule OutPace 2 Bike Rack TH39SA Be Folded Up On A 2018 Honda Pilot?
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Is Sensor Relocation Kit Required for Installation of Draw-Tite Hitch on 2019 Honda Odyssey Elite
- Q&A: How to Determine if 2012 Lexus RX 350 has Factory Tow Package for Wiring Harness
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Hitch Installation Tips
- Article: How to Accurately Measure Trailer Leaf Springs