Installation of Trailer Hitch Receiver 75676 on 2014 Lexus 450h

Question

Question:

Once again, thanks for your comprehensive reply! Sorry I didn't mention I have beach cruisers with both front and rear fenders. I really do LIKE the bike rack you recommended. It does seem rather simple, which is good, and the tilting feature is important. BUT... I don't think it would work with fenders as the clamp down is meant for a tire. Is that correct? And if so, what is a good, simple, tilting, carrier for fender bikes. I like the recommended carrier's concept. A light aluminum carrier isn't a bad idea either. And would you still recommend the Truat locks or something else? I think that is about all. I should have been more specific initially as to what type of bikes they are. They are the Electra Townies -- 3 speed aluminum with fenders. Though I don't need it at this time, I might get the wiring harness with one of the other items so I don't have to pay shipping. I do have the factory tow package. Which wiring harness do you suggest? Thanks again for all your help.

asked by: Lisa

1

Helpful Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75676 is a confirmed fit for your 2014 Lexus RX 450h. We do not have any videos of the RX450h with that particular hitch receiver, but I have added the video of the installation of the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13143 which is also a fit to assist.

expert reply by: Jason S

1

Lisa

10/2/2020

Once again, thanks for your comprehensive reply! Sorry I didn't mention I have beach cruisers with both front and rear fenders. I really do LIKE the bike rack you recommended. It does seem rather simple, which is good, and the tilting feature is important. BUT... I don't think it would work with fenders as the clamp down is meant for a tire. Is that correct? And if so, what is a good, simple, tilting, carrier for fender bikes. I like the recommended carrier's concept. A light aluminum carrier isn't a bad idea either. And would you still recommend the Truat locks or something else? I think that is about all. I should have been more specific initially as to what type of bikes they are. They are the Electra Townies -- 3 speed aluminum with fenders. Though I don't need it at this time, I might get the wiring harness with one of the other items so I don't have to pay shipping. I do have the factory tow package. Which wiring harness do you suggest? Thanks again for all your help.

Reply

Jason S.

10/2/2020

The Draw-Tite Max Frame # 75676 is rated for 400 lb tongue weight and the Curt # C13143 is rated for 600 lb tongue weight. This is the biggest difference between the two other than the design around the exhaust. For a bike rack, you won't need that additional tongue weight, so there is no need to spend the extra unless you really prefer the design. There isn't any noticeable difference with the finished look or the clearances. The 2013 and 2014 model years won't impact the fit at all. You don't need a hitch alignment collar, but if you want to use one, the etrailer Hitch Pin Alignment Collar for Bike Racks, Cargo Carriers, Ball Mounts, and Tow Bars # e98942 does make installation easier ensuring the hitch pin hole is aligned. For a bike rack, I recommend the Kuat Transfer 2 Bike Platform Rack for Fat Bikes - 1-1/4" and 2" Hitches - Black # TS02B-FB with lock set # PTSCLK12. This is simple, easy to install the rear bike with the U-frame you can stand in the middle of, and also holds your bikes well. For a ball mount, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black # BWTS10033B. This gives you height adjustment for different trailers, and gives you a clean look when not in use allowing the hitch ball to be tucked away to protect your shins as well. I recommend using the anti-rattle lock # 63232 for the best fit.

Reply

Lisa

10/6/2020

Once again, thanks for your comprehensive reply! Sorry I didn't mention I have beach cruisers with both front and rear fenders. I really do LIKE the bike rack you recommended. It does seem rather simple, which is good, and the tilting feature is important. BUT... I don't think it would work with fenders as the clamp down is meant for a tire. Is that correct? And if so, what is a good, simple, tilting, carrier for fender bikes. I like the recommended carrier's concept. A light aluminum carrier isn't a bad idea either. And would you still recommend the Truat locks or something else? I think that is about all. I should have been more specific initially as to what type of bikes they are. They are the Electra Townies -- 3 speed aluminum with fenders. Though I don't need it at this time, I might get the wiring harness with one of the other items so I don't have to pay shipping. I do have the factory tow package. Which wiring harness do you suggest? Thanks again for all your help.

Reply

Jason S.

10/6/2020

The T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # 118252 is my recommendation. If you need to add a 7-way I recommend the # ETBC7L and then use the Echo Brake Controller # C51180. The Hollywood Racks Sport Rider SE2 Bike Rack for 2 Electric Bikes # HLY74FR is the best option for Electra Townie Bikes. The cruiser bikes will work well on this bike rack. It has locks included and may because of the deep step thru frame require a bike adapter bar like # 64005. This creates a top frame rail between the handlebars and seat post for greater stability.

Reply