Hanger can be configured to work as either a front, center, or rear hanger on tandem- or triple-axle applications. Can be used on single-axle trailers as a front hanger only. Designed to suspend your double-eye leaf spring.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a brief look together at this hangar for double eye springs. This is designed to be used as a front, center, or rear hangar for double or triple axle applications. And this can also be used as a front hangar only on single axle applications. Now, this is going to fit your 1-3/4 inch wide double eye springs with a 9/16 inch diameter eye, and we can tell this by taking this measurement here. Line this up here so you can see.
So as you can see, the opening measurement there inside edge to inside edge is about two inches. And then that's going to narrow as we move up here to about 1-7/8 inches at the top. So this is going to fit a 1-3/4 inch wide double eye spring perfectly. And again, this is going to work with a 9/16 of an inch diameter bolt. I do wanna point out that that bolt is not included.
This is constructed from durable steel. It is a weld-on installation. And let me go ahead and just give you some overall measurements that I think will prove helpful for you. So looking at the overall height from top to bottom, we're sitting right at 3-3/16 inches tall. The overall depth from edge to edge, we're sitting right at three inches deep.
And then the overall width from edge to edge again, right at 2-7/16 inches wide. And then the height from the center of our bolt hole all the way to the top of our hangar, we're sitting right at two, and if I can hold that steady, right at 2-3/8 inches tall. And then you might be wondering about the thickness of this hangar. And so looking at just the thickness there, we're sitting right at 3/16 of an inch thick. I think that's going to wrap up our look today.
I do hope that the information was helpful for you. Again, my name is Andy. Thank you for joining me.
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.