Trailer Suspension Hangers for Dexter Heavy Duty Suspension Kit # K71-360-00
Updated 10/27/2015 | Published 10/26/2015
Products Featured in This Question
Question:
I am purchasing the suspension kit #K71-360-00. Could you please tell me what hangers go with this kit? I have 7000# axels and 16 inch wheels.
asked by: Tim
Expert Reply:
There are different hangers that you could use with the Dexter heavy duty suspension kit # K71-360-00. To achieve 4-1/2 to 5 inches clearance between the trailer frame and axles you could use 6 of hanger # 28-5.
To achieve 3-1/2 to 3-1/4 inches clearance you could use 4 of front/rear hangers # 115917 and 2 of center hanger # 115918 but these are usually found on lower capacity axles.
These are going to be the most common set ups and should work well for you.
Product Page this Question was Asked From
Dexter Heavy-Duty Suspension Kit for Triple-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Search Results: trailer brake controller
- Search Results: k71~360~00
- Search Results: axle hangers
- Video: How to Choose a Trailer Brake Controller
- Q&A: Does the Dexter DX Series Electric Over Hydraulic Brake Actuators Need an Adapter in Ford Trucks
- Q&A: Can I Make My 2013 Chevy 3500 Compatible With Electric Over Hydraulic Trailer Brakes?
- Video: What to Know About the Front/Center/Rear Hanger for Double-Eye Springs
- Video: Hands-On with the Dexter Heavy-Duty Suspension Kit for Triple-Axle Trailers
- Q&A: Is 34" Axle Spacing Okay for the Dexter Axle Suspension Kit # K71-360-00
- Q&A: Could the Dexter Heavy Duty Suspension Kit K71-360-00 be Used with 34 inch Axle Spacings
- Q&A: What Should Hanger Spacing Be on Triple Axle Trailer Dexter Suspension Kit # K71-360-00 5,200LB Axle
- Q&A: Comparing Dexter Heavy Duty Suspension Kit and Triple-Axle Trailer Hanger Kit
- Q&A: Recommended Hangers and Shackles for Building Tandem 7,500 Pound Axle Trailer
- Shop: Trailer Wiring
- Shop: etrailer Rust-Resistant 6-Leaf Double Eye Spring for 7K Trailer Axles - 24-7/8" Long - Dacromet
- Shop: Dexter Heavy-Duty Suspension Kit for Triple-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Center Hanger for TruRyde Equalizer
- Shop: Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
- Search Results: trailer wiring
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Article: Trailer Wiring Diagrams
- Search Results: brake controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Suspension Parts
