Will Taller Hangers Lift My Keystone Travel Trailer
Updated 06/10/2019 | Published 06/08/2019 >
Products Featured in This Question
Question:
Would this hanger act as a 2 inch lift block? I am looking to lift my trailer 2 inches for ground clearance purposes. I have a 2002 keystone travel trailer that sits low I just need a 2 inch lift on it but do not want to do anything to crazy.
asked by: Isaac
Expert Reply:
The Hanger part # 115918 is going to lift your trailer, how much depends on the hangers that you currently have on the trailer. The difference between the height of your current hangers and these will be how much lift you get on the Keystone. We do carry taller hangers like part # E4139 that measures 4-1/4" tall.
Another option for a lift is an over-under kit like part # K71-384-00 for a 2-3/8" axle or part # K71-385-00 for a 3" axle. You are basically moving the springs to on top of the axle instead of underneath to increase ground clearance. You may hear some people referring to this as "flipping the axle". Both kits will only work on trailers that are using double-eye spring suspension and it is recommended to tack weld the new spring seats to the axle.
Product Page this Question was Asked From
Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 2-1/2 Inch Tall
- Tandem Axle
- Triple Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Lighting Requirements
- Video: What to Know About the CE Smith Rear Hanger Bracket for Trailer Slipper Springs
- Video: An In-Depth Look at the Rear Hanger for 1-3/4" Slipper Spring
- Video: Front Hanger for 2" Wide Slipper Springs Feature Review
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/4" Center
- Shop: Dexter Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 5" Front, 6-3/8" Rear
- Shop: Front Hanger for 1-7/8" Wide Slipper Springs - 2-3/8" Tall - 9/16" Bolt Hole
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Shop: Front Hanger for 2" Wide Slipper Springs - 5" Tall - 9/16" Bolt Hole
- Shop: CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Search Results: shackles
- Search Results: trailer leaf springs
- Q&A: 4-1/4 Inch Tall Hanger Needed for 1-3/4 Inch Wide Double Eye Leaf Springs
- Q&A: Can Front and Rear Trailer Suspension Hangers be the Same Height with Off-Level Leaf Springs
- Q&A: How to Determine Hub Face to Hub Face Dimension for Picking out Replacement Trailer Axle
- Q&A: Are Shackles Necessary For A Single Axle Utility Trailer?
- Q&A: Tallest Front and Rear Double Eye Leaf Spring Hanger For Trailer
- Q&A: Recommended Ways To Raise Height Of Small 4 X 8 utility Trailer
- Q&A: Hanger Compatibility For Bolt-On Application On 2016 Tracker Trailer
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer jack
- Shop: Suspension Enhancement



