Where Is Measurement Taken On 1-1/2 Inch and 2 Inch Hangers In Redline Trailer Hanger Kit # APTT3
Published 01/12/2011
Products Featured in This Question
Question:
On your triple axle hanger kit APTT3, the hangers have a 1.5 and a 2.5 size of the hanger. Is this from the center of the bolt hole, or over all length?
asked by: Jimmie
Expert Reply:
The height measurement of the hangers in the Redline Triple-Axle Trailer Hanger Kit, part # APTT3, is from the top of the hanger to the center of the bolt hole.
The 1-1/2 inch tall hanger is the Redline Front/Rear Hanger for Double-Eye Springs, part # 115917 and the 2-1/2 inch tall hanger is the Redline Center Hanger for Double-Eye Springs, part # 115918.
I am including a picture of the hanger and it shows where the dimension is measured.
Product Page this Question was Asked From
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Triple Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Will 8k Leaf Springs Lift Trailer With 7k Axles
- Q&A: Availability of Heat Strip or Heat Pump for Furrion Chill Cube RV AC
- Q&A: Distance From End of Spindle to Face of Brake Flange
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Availability of Complete Suspension Kit for Triple Axle Trailer with 6k Axles
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Where to Position the Trailer Axle?
- Q&A: Recommended Hanger Spacing for Triple Axle Trailer
- Q&A: How To Determine Correct Leaf Spring Hanger Spacing for the Dexter Heavy Duty Suspension Kit
- Q&A: Recommendation for Adding Third Axle To Trailer Suspension
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Lighting Requirements
- Article: How to Bleed Your Trailer Surge Brakes