Looking For 6" Tall Center Hanger And 2.5" Tall Front/Rear Hanger
Updated 02/03/2026 | Published 07/10/2024 >
Products Featured in This Question
Question:
Hi I need a center hanger 6” and corner hanger 2.5” Do you have this parts for trailer ?
asked by: Yariel
0
Expert Reply:
Hello Yariel, thanks for reaching out. The tallest center hanger we offer is the Center Hanger for Double-Eye Springs # 115919 which is 5-7/16" tall. This is measured from the top of the hanger to the center of the bolt hole.
For the corner hanger I recommend part # 115918 which is 2-3/8" tall and can be used as a front, center or rear hanger.
expert reply by:
Jesse M
0
Product Page this Question was Asked From
Center Hanger for Double-Eye Springs - 5-7/16" Tall - 3/4" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 3/4 Inch Diameter
- 5-7/16 Inch Tall
- Tandem Axle
- Triple Axle
- Redline
more information >
Continue Researching
- Q&A: Do I Need Longer Shackle Straps to Install the MORryde ALLTREK 4000?
- Q&A: Equalizer Replacement Options for Dexter 13-122 Equalizer
- Q&A: Replacement 6 Leaf Leaf Spring for a Dexter 7,000 lbs Axle
- Q&A: Can I Use a 6-Ton Jack to Change the Tire on a 16,000 lbs Motorhome?
- Q&A: Recommended Leaf Springs, Shackle Kit, and Wet Bolts for a Trailer w/ 4,400 lbs Axles
- Q&A: Replacement Parts Available for the RAM Trailer Jack Part # TJD-7000S
- Q&A: How To Choose Correct MORryde Shackle Upgrade Kit
- Article: Where to Position the Trailer Axle?
- Article: Trailer Wiring Diagrams
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern


Jesse M.
2/3/2026
Hey Yariel, how did the 5-7/16" center hanger and 2-3/8" corner hanger work out for your trailer? Knowing what fit best could help others trying to match their suspension parts.