Availability of 2 inch Tall and 6 inch Tall Trailer Suspension Hanger
Updated 11/17/2025 | Published 12/18/2024 >
Products Featured in This Question
Question:
I need a leaf spring hanger that is 2 tall from top of hanger to center of 9/16 bolt hole that will fit 1-3/4 wide leaf spring. I also need a leaf spring hanger that is is 6-1/2 tall from top of hanger to center of 3/4 bolt hold that also fits 1-3/4 wide leaf spring. Do you have these?
asked by: Jonathan J
Expert Reply:
Hey Jonathan, we don't have the exact hanger dimensions you mentioned but we might be able to still help. We have the # 115918 which measures 2-3/8 inches from the mounting surface down to the bolt hole center and we have the part # 115919 which measures 5-7/16 inches from top to the bolt hole center.
Product Page this Question was Asked From
Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 2-1/2 Inch Tall
- Tandem Axle
- Triple Axle
- etrailer
more information >
Continue Researching
- Search Results: trailer suspension parts
- Video: etrailer Shackle Strap Replacement on a Utility Trailer
- Video: Review of CE Smith Trailer Suspension Parts - Standard Equalizer - CES76WR
- Video: Comprehensive Review: Equalizer for 1-3/4" Wide Double-Eye Springs
- Q&A: Replacement Equalizers and Shackle Straps for 2007 Keystone Raptor 3712
- Q&A: Direction of Equalizer # TREQ105 When Installed on Triple Axle Trailer
- Shop: Center Hanger for Double-Eye Springs - 5-7/16" Tall - 3/4" Bolt Hole
- Shop: Equalizer for 1-3/4" Wide Double-Eye Springs - 9" Long - 9/16" Center Hole
- Shop: Terran Axle Tandem-Axel Center Hanger Kit for Double Eye Springs - 2-1/2" Tall Middle
- Q&A: Replacement Axle, Springs, Wet Bolts, Equalizers, and Brakes for Tandem Axle Trailer
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt Hole
- Shop: Replacement Shackle Strap - 2-5/8" Long
- Shop: Equalizer for 1-3/4" Wide Double-Eye Springs - 6-3/4" Long - 9/16" Center Hole
- Shop: CE Smith Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - Galvanized
- Video: Checking Out the Front/Center/Rear Hanger for Double-Eye Springs
- Q&A: Is The Dexter Equalizer for 1-3/4" Wide Double-Eye Springs - 9" Long - 9/16" Center Hole Available
- Q&A: Outside Width Dimension of the Redline Trailer Hanger # E4139
- Q&A: Trailers Backing Plate Is Not The Same Distance From The Drum Front And Rear
- Q&A: What is Recommended Clearance between Trailer Axle and Frame
- Article: Determining Trailer Tongue Weight
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Lighting Requirements
- Article: Where to Position the Trailer Axle?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Raise Your Travel Trailer Height


Jameson C.
11/17/2025
Hey Jonathan, did the hangers with the 2-3/8 inch and 5-7/16 inch measurements end up working for your 1-3/4 inch wide leaf springs? Knowing what fit best could help others trying to match similar sizes.