bing tracking image
  1. Trailer Suspension Parts
  2. etrailer
  3. Hangers
  4. Camper
  5. Car Hauler
  6. Utility Trailer
Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole
etrailer

Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole

Part Number: 721585
In Stock
$17.62
Trailer Suspension Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Rear hanger works with trailer suspension systems that have 2" slipper springs. Great Prices for the best trailer suspension parts from etrailer. Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole part number 721585 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (32)
  • Q & A (0)
  • Videos (1)
  • Photos

etrailer Trailer Suspension Parts - 721585

  • Hangers
  • Camper
  • Car Hauler
  • Utility Trailer
  • Slipper Springs - 2 Inch
  • 5-1/16 Inch Tall
  • Single Axle
  • Tandem Axle
  • Triple Axle
  • 9/16 Inch Diameter
  • etrailer

Rear hanger works with trailer suspension systems that have 2" slipper springs.


Features:

  • Configured as rear hanger
  • Provides attachment point for leaf spring
    • Hanger suspends spring from trailer frame by providing a resting place for the slipper end of the spring
  • Designed for trailers with 3,500-lb to 9,000-lb axles
  • Fits 2" wide slipper springs
  • Works with 9/16" diameter bolt (sold separately)


Specs:

  • Overall dimensions: 6" tall x 4" deep
  • Inner width: 2-3/16"
  • Height (from top of hanger to center of bolt hole): 5-1/16"


TSW 1585 Rear Hanger for 2" Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole

Replaces 721585





Video of Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Trailer Suspension - Leaf Spring Suspension - 721585 Review

Today we're going to take a look at the 5-1/6" tall rear hanger for 2" wide slipper springs. This rear hanger will work with a trailer suspension system that has 2" wide slipper springs. This is configured as a rear hanger. This is designed to suspend the spring from the trailer frame by providing a resting place for the slipper end of the spring. It is designed to work with a 9/16 diameter bolt. We do sell that separate on our website. It's part number 166079.

Happened to pull that part number. There's your bolt and the nut that's included. Basically that would just go through the hole right down here, come through the other side and you put your nut on there and tighten it down. Now this is designed for trailers with 3,500-pound to 9,000-pound axles. The height they give on this for the rear hanger is 5-1/6". That measurement is from the center of the hole to the top.

If we take our ruler, go center to the top, that will get you your 5-1/6 measurement. That should do it for the review on the 5-1/6" tall rear hanger for 2" wide slipper springs.

Customer Satisfaction Score:


Customer Reviews

Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole - 721585

Average Customer Rating:  4.7 out of 5 stars   (32 Customer Reviews)

Rear hanger works with trailer suspension systems that have 2" slipper springs.

by:

Why are you asking? Apparently you don't read what was emailed to you, about me wanting to return this product. It was the wrong part. I felt ripped off by etrailer. But I found a wonderful wielder/engineer that modified it and and created the hanger part needed to make the repairs.



by:

Great product fits my need perfectly. The previous owner had bent the frame and bracket. I liked that this product has welded support in the center. With the extra support welded in the bracket and with me not planning on overloading the trailer as the previous owner had done to cause the damage, I feel this will be a permanent fix



by:

Wish you would give measurements of the part in detail.

Etrailer Expert

Jenny N.

4/15/2023

What measurement would have made it easier to know if this hanger would work for you?

Jared

4/26/2023

Width, I bought the Bolt which was recomended by the website that said others who bought this bracket also bought this bolt. Well the bolt was definatly not for the bracket.



by:

The welds on these hanger slipper rub rails were terrible. Low penetration and total loss of the shield gas on one long weld. Note the hanger in the picture and video on eTrailer web site has the weld on the wrong side of the rub rail; but my 2 came in with the weld on the correct side. I'll need to re-weld all however due to total lack of quality control. Shipping packing was terrible and half of these hangers were outside the box.



by:

good product good follow through



by:

excellent product



by:

Very fast shipping. Exactly what I needed. I have a old Redi Haul tilt bed that I use as a utility trailer. Need to move the axle back about a foot.



by:

I ordered these hangers from parts store and they kept saying each day they aren't in yet. I waited almost two weeks still not here..!
I order from etrailer.com on Tues about 3;30 pm and the parts were at my front door by 1;00 pm on Thursday . Excellent service!



by:

Great buying experience. Jaime was very helpful



by:

Item is as expected and heavy duty



by:

Thanks did receive the hanger should work fine. Thanks



by:

This solved my problem with larger size tires. Heavy Duty.



by:

Works as advertised



by:



by:

Very very nice thanks



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
32
Show More Reviews

See what our Experts say about this etrailer Trailer Suspension Parts

  • Are there Bolt On Spring Hangers?
    Sorry about your troubles but we do have a some spring hangers that can be attached with 9/16" bolts. I have listed a few of them below: Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only item # 93003-3X Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole item # 721585 Front Hanger for 2" Wide Slipper Springs - 3-9/16" Tall - 9/16" Bolt Hole item # 721584 Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt...
    view full answer...
  • How to Find Correct Replacement Leaf Springs for a Pioneer BH270
    Cory in order to find the correct leaf springs for your Pioneer BH720 you're going to need to measure the spring width, the center to center eye measurement, as well as the spring seat center to spring seat center. From here I will be able to help you find the correct set of leaf springs for your trailer.
    view full answer...
  • How To Measure For Replacement Rear Hanger for 2019 Jayco Pinnacle Fifth Wheel
    We have several options and I think we can locate what you need with a little more information provided. Unfortunately we not have the abilty to pull OEM build sheets to identify what part numbers were used to build a Jayco Pinnacle. But we have options such as the Rear Hanger for 2" Wide Slipper Springs, # 30-28 that is 5-1/4" Tall with a 5/16" bolt hole and if you let me know the needed measurements and what size springs you have we can locate a solution. Please note the attached image.
    view full answer...
    Image 1 for
  • Availability of Rear Hanger for 2 inch Wide Slipper Spring and Complete Hanger Kit
    For a rear hanger for a 2 inch wide slipper spring we have the part # 721585 which is 5-1/16 inches tall. Then for a complete kit like you mentioned needing you'd want the part # APT6SE which comes with a 12 inch equalizer.
    view full answer...
  • Dimensions of Hangers Included with Single-Axle Trailer Hanger Kit for 2" Slipper Springs APS6SE
    The front hangers in kit # APS6SE are # 721584. They measure 3-3/4 inches from the top to the center of the mounting hole. The hole is 9/16 inches in diameter. The holes that are in the top are not for bolting the hanger. They are there to mount the hangers using button welds. Very few hangers are designed to be bolted on. The rear hangers in the kit are # 721585. They measure 5-1/6 inches tall from the top to the center of the 9/16 inch diameter hole. It also features the 2 holes for...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Distance from Top of Mounting Bracket Down to Spring Bracket of Slipper Spring Hanger
    The distance from the top of the mounting surface of the Rear Hanger for 2" Wide Slipper Springs # 721585 down to bracket that the spring would rest on is 2-3/8 inches.
    view full answer...
    Image 1 for
  • Hanger That Will Allow Hollywood Racks Sport Rider Bike Rack To Be Stored Vertically & Tight On Wall
    I do have a possible solution for you as the engineers at Swagman said their X Mount Bike Carrier Storage Rack # S80940 is only capable of supporting a ball mount by the vertical hanger. You would have to position your Hollywood Racks Sport Rider SE Bike Rack # HLY84FR into the horizontal tube which you already identified would stick out to far. The Rear Hanger # 721585 would allow you to bolt it to your wall and is going to be more than strong enough to support the weight of your bike...
    view full answer...
    Image 1 for Image 2 for
  • Which 2-inch Hanger is Used for the Rear hanger Slipper Springs?
    On 3,500 to 9,000 lb axles with 2-inch wide slipper springs, the Hanger for 2" Slipper Spring 5-1/16" Tall, part # 721585, can be used as the front, center and rear hangers.
    view full answer...
  • Boat Trailer Slipper Spring Installation
    It sounds like you are using a bolt-on spring hanger like Redline # 721585 on your boat trailer. Trailer suspensions will never "behave" when they are unloaded the same way they do when carrying the weight they are designed for. If the 1/2-inch of play you are referring to is in the bolt on hanger, then you will want to secure it by welding. If the play is in the end of the slipper spring then this may not be an issue. As long as your springs and hangers are of the same width and appropriate...
    view full answer...

Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Mike S
Updated by:
Mike S
Employee DeAnne T
Expert Research:
DeAnne T
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.