We'll connect you with nearby partnered installers who know this exact setup.

Dexter

Torflex Lift Kit - Single Axle - 2-5/8" Lift

Part Number: K71-723-01

866 Reviews | 131 Questions

In Stock

$107.40

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

dexter trailer suspension parts alignment and lift kits torflex kit - single axle 2-5/8 inch

dexter trailer suspension parts alignment and lift kits

dexter trailer suspension parts boat camper car hauler snowmobile utility k71-723-01

dexter trailer suspension parts k71-723-01

dexter trailer suspension parts alignment and lift kits k71-723-01

dexter trailer suspension parts boat camper car hauler snowmobile utility

dexter trailer suspension parts alignment and lift kits boat camper car hauler snowmobile utility

dexter trailer suspension parts alignment and lift kits boat camper car hauler snowmobile utility torflex kit - single axle 2-5/8 inch

Show All (9) Product Images

Show Fewer Product Images

Customer Photos

Torflex Lift Kit - Single Axle - 2-5/8" Lift customer photo

Show All (37) Customer Images

Show Fewer Customer Images

Videos

The Low-Down on the Torflex Lift Kit

Show All (1) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for single axle applications. Compatible with #9 Torflex axles with a 2,000-lb capacity. Great Prices for the best trailer suspension parts from Dexter. Torflex Lift Kit - Single Axle - 2-5/8" Lift part number K71-723-01 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

Dexter Trailer Suspension Parts - K71-723-01

Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for single axle applications. Compatible with #9 Torflex axles with a 2,000-lb capacity.

Features:

Lift kit raises your trailer frame to provide 2-5/8" additional clearance between trailer frame and axle
Designed for use on trailers with #9 Torflex axles with 2,000 lb capacity
Spacers attach to side-mount brackets on your trailer's frame
- Not compatible with top-mounted torsion axles
Includes:
- (2) #9 Frame spacers (003-399-02)
- 12 Plain washers (005-080-00)
- 8 Locking hex nuts (006-125-00)
- 8 Hex screws (007-153-00)
Distance between bolt holes center to center: 7-3/4"

Note: Lift kit cannot be used with Torflex axles with 3" high profile brackets.

K71-723-01 Torflex Lift Kit - Single Axle - 2-5/8" Lift

Installation Details K71-723-01 Installation instructions

Video of Torflex Lift Kit - Single Axle - 2-5/8" Lift

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Demo Dexter Axle Accessories and Parts K71 723 01

The Low-Down on the Torflex Lift Kit

Video Transcript for The Low-Down on the Torflex Lift Kit

Today we're gonna take a look at the number nine Tour Flex two and five-eighths inch lift kit for a single axle. Now this lift kit will raise your trailer frame to provide two and five-eighths inches additional clearance between your trailer frame and your axle. It will include the spacers, the mounting hardware for a single axle application, and these are designed for use on trailers with the single number nine Tour Flex axle with a 2000 pound weight capacity.It includes everything shown here on the table. It'll include the two number nine frame spacers, 12 plain washers, eight locking hex nuts, eight hex screws, and a nice set of detailed instructions on how to install everything.The last thing I want to show you is just the height of the lift kit, from the very bottom to the very top is gonna measure right at two and five-eights inches. That should do it for the review on the number nine Tour Flex two and five-eighths inch lift kit for a single axle.

Customer Satisfaction Score:

91% were satisfied with this product

9% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Alternate product found

9% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Alternate product found

4.6

866 reviews

5 Stars		(676)
4 Stars		(102)
3 Stars		(38)
2 Stars		(18)
1 Star		(32)

by: Mason 09/16/2026

Fit just as it was said. Turing the old camper into a utility trailer and it helped raise the frame almost over the tires. Will make it easier for drive over fenders.

by: Gunnar 05/23/2022 One Year Later

Installed on a 2017 NuCamp Tag XL. Needed a little extra head room for the kitchen clamshell. Install was easy with basic tools, a couple jack stands, tape measure and some red loctite. Lift height is as claimed because it directly lifts the axle. Product has worked great, nothing has come loose or shifted. Stability towing has not changed. The only trouble is the wiring for the fender light is a little tight but that is a camper issue, no fault of the lift.

Click to Enlarge

Gunnar One Year Later

5/24/2023

Great product. Several thousand miles since install with no issues. Did not change the towability or handling characteristics of the camper.

by: Michael 06/20/2025

Great product. Only took about an hour to install and my trailer is 3” higher.

Click to Enlarge

Gwendolyn Y.

6/23/2025

You got some good clearance now, Michael! Were you looking to get more clearance or another reason for lifting the trailer?

Mikep

6/23/2025

@GwendolynY Yes, the spare tire mounted underneath or T@G was only 6” from the ground. With the lift on the trailer it is now 9”. Much better clearance for avoiding road debris or towing down unpaved roads.

Gwendolyn Y.

6/24/2025

@Mikep Totally agree, that is much better clearance. I don't know how it is where you live but we have a few areas around here that are speed bump happy so I could only imagine what driving on unpaved roads is like when you have minimal clearance.

by: Lee 06/30/2025

Great product and very easy to install. The hardest part was removing the old bolts, but it was made easier with the help of an impact gun.

Lee One Year Later

7/1/2026

After a year of use, including off-road, the product has been very good. I am happy with my purchase, and would highly recommend.

Claire H.

7/1/2026

@Lee That's great to hear! I'm glad its holding up well for all your adventures!

by: Dustin 07/16/2026

Very good customer service and got my order out very quickly!

by: Laura 09/27/2026

Easy to install, works great on my Little Guy T@G camper!

by: John 12/23/2023 One Year Later

Easy install and was happy with the extra clearance

Click to Enlarge

John One Year Later

12/24/2024

Completely satisfied. it was one of the best additions to my tear.

by: Peter 05/31/2020

Ordering was easy. Shipping was on time. Communication on shipping was good.
The kit appeared to well made. Didn't see any issues upon opening. The instructions were clear and easy to follow.
The only thing was the bolts and nuts, I don't know if they have some sort of locktite or something on them but I had to wrench them from the first two turns to the end, and really had to work at it as they were incredibly tight. At first I thought that either I had cross threaded them or that the bolt and nut were different threads, neither was an issue. It took me probably twice to three times longer to install the kit because of this. It was easier to take off the very rusted original bolts than putting the new ones on.
The final results were excellent.

Click to Enlarge

by: Marissa 01/10/2020

I love my camper, but my only complaint is that it did not have the ground clearance I needed for anything but the best roads. This kit allows me to get off-road, not to very extreme conditions, but much better than it was without it.

Click to Enlarge

by: John 06/04/2026

If did not fit correctly for my camper (2001 bantam17). I had to redrill holes and weld it to the frame

by: Mitch 07/08/2022

Saw this link on [another] site. Didn’t know it existed. Ordered one right away. Shipped the next day for free! Very easy install. Looks great. Hopefully no more mangled license plate.

Click to Enlarge

by: Edward 01/07/2023

It's expensive for what you get, although the quality is nice. It did the job on my Bushwhacker teardrop.

Very easy to install. Took me about 30 minutes.

Click to Enlarge

by: Scott 06/08/2018

Works great! This product comes with all the parts required to bolt on to the camper/axle...

Click to Enlarge

by: Ken 04/29/2026

Easy install! Works great!

by: Harold 03/20/2026

It was as advertised! Can’t wait to go boondockiing.

by: Gordon 04/25/2026

The product fit perfectly and was easy to install!

by: Jeffb 08/22/2019 One Year Later

I installed these on a 725T aluminum frame 1999 Terry. They raised the trailer a couple inches which doesn't sound like much but made all the difference in dragin the back bumper, back levelers etc. Couldn't tell any difference in towing or fuel useage. Any ways it wasn't enough to notice. Trailer handled the same. Make sure to cross check fitment with the folks at the store. I didnt originally and paid a hefty restock shipping fee for not doing so. Good luck and Happy Trails
Jeffb

Jeffrey B. One Year Later

8/23/2020

The lift did what I needed it to do. I havent noticed any difference in towing. A few inches makes a big difference. Installed on 2000 25fleetwood terry.

by: Ronald 09/14/2018

It was a easy fix to lift my 1988 Jayco, about 2 hours including finding and placingthe jack stands, didn’t have to take off the wheels like the video recommends, used wrenches instead of hooking up air and using the impact gun! Looks great when I kick back and look at it!

Ronald One Year Later

9/14/2019

Worked out great on the lift kit

by: Wesley 04/30/2018

I ordered this kit to provide extra room for tires(AM3S120) that have a higher speed rating. Everything shipped quickly! The kit fit perfectly with no problems.

Click to Enlarge

by: James 02/27/2025 One Year Later

This kit was extremely easy to install and did exactly what I needed it to do (get more ground clearance on my teardrop trailer). Great product!

by: AC 06/18/2023 One Year Later

excellent kit....plenty of extra clearance for dirt roads that may not be graded or leveled perfectly. Sits higher in the tow position which levels out the trailer at a normal height instead of having to use a severe drop hitch.

by: Zach 04/22/2024 One Year Later

Very easy to put on, took about 2 hrs. Make sure you order the correct sized one. Don't just go by the axle number measure the frame width and distance between the holes. Makes a big difference on what my camper can clear and the size of dips I can get thru without hitting. Get a few extra blocks for the stabilizer.

by: Ben 08/21/2020

I have a 2019 Geo Pro FBS without the off-road package. The Geo Pro had 14" wheels. The ground clearance was not that great so I went with this 3" Torflex lift kit.
Now when I say that the installation was easy, that is exactly that. Super easy and it did come with an installation booklet with step by step photos.
Total install time: 1 hr 30 min. That is start to finish.
Total height that I gained: over 5 inches. Because I went with 225/ 75/ 15R.
This is the best route to go toget the extra needed clearance.

by: Mark 08/09/2019

They work just as advertised. I used them to lift a T@G teardrop, and the installation was very straightforward. Together with the new, larger tires and wheels I am putting on (going from 13" to 15" wheels), I will pick up just over 4" in additional ground clearance.

by: Victor 09/07/2021

Item came as described. Very stout hardware. Dexter must have fixed the powder coat issue(some reported chipping upon arrival), because the item was fully coated with no paint chips .

This gave me a good lift so that my trailer would not drag everywhere I went. This went on a 1993 Skamper 240C. Install is very easy. 4 bolts to drop the axle. 8 bolts to attach the lift.

Definitely recommend for #9 axle. You can identify yours by crawling underneath the trailer and looking at the capacity. 2000 lbs is #9. Which is this part!

866

true

Show More Reviews

See what our Experts say about this Dexter Trailer Suspension Parts

Do you have a question about this Trailer Suspension Part?

Lift Kits Available for Torflex Axles
The lift kits we carry fit with specific axles; the # K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit would work for you. There are a number of other lift kits for Torflex axles which I'll list for you. Tandem Axle - 2-7/8" Lift compatible with side-mounted #11 Torflex axles with 4,100-6,000-lb capacities # K71-724-02 Tandem Axle - 2-5/8" Lift...
view full answer...
Availability of Lift Kit for Escape 17B Travel Trailer
Hi Michael; the Escape 17B uses a Dexter Torflex axle but you will have to identify which one. This can be found on the axle tag. Once you have identified the axle you can choose from the following: -Torflex Lift Kit # K71-723-01 (#9 Torflex with 7-3/4" bolt hole spacing) -Torflex Lift Kit # K71-707-01 (#10 Torflex with 8" bolt hole spacing) -Torflex Lift Kit # DX56CR (#11 Torflex with 9-1/2" bolt hole spacing) If I had to guess it is a #10 Torflex but the only way to know for sure...
view full answer...
Lift Kit Needed for a Torflex Axle on a 2017 Lance 1575 Travel Trailer
I do not advise you flipping the Torflex axle as that is not how it was designed to be used. Instead what you need is a lift kit for your axle. For single Torflex axle trailers we have 2 different lift kits, part # K71-723-01 for #9 Torflex axles and part # K71-707-01 for #10 Torflex axles. From what I could find on your 2017 Lance 1575 it looks like you have a #10 Torflex axle which means you need part # K71-707-01. This kit will lift your trailer 2-5/8" which isn't exactly the 2-7/8"...
view full answer...
Correct Axle Risers for Forest River Rockwood GEO Pro Trailer
The Forest River Rockwood GEO Pro Trailers have Dexter Torflex Axles so we do have lift kits available. However, there are different lift kits depending on which particular Dexter Torflex Axle you have and I don't have this information. Therefore, you will need to look at the axle tag on the tube and determine the axle capacity and or model number. I have then attached the two options below which you can confirm fit once you have the model number and or axle capacity. #10 Torflex Axles...
view full answer...
Torsion Axle Lift Kit For A 2010 StarCraft 816
Hi Jose! I contacted Dexter to make sure, and you have a #9 Torflex axle on your 2010 StarCraft 816. The pictures you included made this a lot easier to figure out, so thanks for that! With that being said, the Torflex Lift Kit - Single Axle - 2-5/8" Lift # K71-723-01 will be the one you want. Are you bottoming out a lot or is the lift for a different reason?
view full answer...
What Lift Kit Fits 2018 Scamp Trailer With Lippert LC120 2,200 lb Axle
Hey Bob, thanks for reaching out. We may have a lift kit for you but I was not able to fine any references for the Lippert LC120 part number you provided, so I will need a bit more information on your axle. Specifically I will need to know if you axle is a torsion axle or a round tube leaf spring axle. If you have a torsion axle, you can use the Torflex Lift Kit # K71-723-01 with 7-3/4" between bolt holes on center or the # K71-707-01 if it is a #10 with 8" between bolt holes on center....
view full answer...
Lift Kit for 1,500 lb #9 Torfllex Dexter Axle
My contact at Dexter confirmed that the Torflex Lift Kit # K71-723-01 will work for your 1,500 lb #9 Torflex axle. That being said, based on your serial number 122265412, I was able to confirm you have a top mounted axle. So in order to install the lift kit, you'll need to replace the existing top mount hangers with a side mount hanger kit, Dexter part number A/P-165-00. You'll need to source that locally though, as we do not carry it.
view full answer...
Lift Kit for a Dexter #9 Torflex Axle
That does appear to be a Dexter #9 Torflex axle. For the #9 you can use lift kit # K71-723-01!
view full answer...
Looking For Lift Kit For A 2006 Single Axle Trailer With Dexter Torsion Axle
Hello Jim, thanks for reaching out. We do offer lift kits that can be used with the Dexter Torsion axles. Do you happen to know the weight capacity of the axle? The S/N seems to indicate a 3,500 lb axle but please do confirm. We offer lift kits for Dexter Torsion Axles in the following capacities: 2,000-lb capacity # K71-723-01 2,300-4,000-lb capacities # K71-707-01 4,100-6,000-lb capacities # DX56CR
view full answer...
Dimensions of Torflex Lift Kit # K71-723-01
I attached a picture that shows the dimensions of the Dexter lift kits # K71-723-01.
view full answer...
Lift Kit for 2014 Riverside Whitewater Retro 155 With Dexter Torflex Axle
Hey Scott! The correct kit will depend on which Torflex axle you have. You can either get the Torflex number off the axle tag, or measure the spacing on your bolts. Then you can choose from the following: -Torflex Lift Kit # K71-723-01 (#9 Torflex, 7-3/4" bolt hole spacing) -Torflex Lift Kit # K71-707-01 (#10 Torflex, 8" bolt hole spacing) -Torflex Lift Kit # DX56CR (#11 Torflex, 9-1/2" bolt hole spacing) Any big trips coming up once you get the lift installed?
view full answer...
Will the Torflex Lift Kit # K71-723-01 Fit My 1993 Jayco 1206 KB to Give Added Clearance
Actually the Torflex Lift Kit - Single Axle - 2-5/8" Lift # K71-723-01 will not fit your 1993 Jayco 1206 KB pop-up camper. This lift kit has a weight capacity of 2000 lbs., I checked online and found that your Jayco has a 2440 GVWR. The correct lift for your camper will be the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift # K71-707-01. This lift kit works for #10 Torflex axles with a weight capacity of 2300 lbs - 4000 lbs. You will need to verify that your Jayco 1206 does not have 3" high...
view full answer...
Lift Kit for Torflex Axle on a 2013 Airstream Sport 16 Trailer
Hey Jeff, thanks for reaching out! I can definitely help you figure out what lift kit you'll need for your 2013 Airstream Sport 16. What Torflex axle do you have? There should be a sticker in the middle of the axle that shows what axle you have - if you can let me know what that is, I can let you know what lift kit you need.
view full answer...
Tor-Flex Lift Kit that Fits 2015 Little guy Silver Shadow 5x10
Can you get me the brand of axle you have? I believe you might have an AL KO axle which we won't be able to help you with but if you have a Dexter or Lippert torsion style axle we can get you a lift for it.
view full answer...
Lift Kit Components Needed For A 2013 Forest river Rockwood Signature Ultra Lite 8280WS
Hey Allen, Does your trailer have torsion axles or do you have a leaf spring suspension? If you have a torsion axle I'll need to see the axle tag in order to ensure you're getting a compatible lift riser. If you have a leaf spring suspension and your leaf springs sit below your axles then could go with an over-under conversion kit # K71-384-00 (2-3/8" diameter axles) or # K71-385-00 (3" diameter axles). With these kits you'd get a lift comparable to the diameter of the axle plus the height...
view full answer...
Lift Kit for 2005 Shadow Cruiser T139 Travel Trailer
From what I have found, the gross vehicle weight rating on your 2005 Shadow Cruiser T139 is 3,150 lbs. Assuming that is correct, it is likely you have a 3,500 lb axle with a 2-3/8" diameter. I recommend verifying this information. For a lift kit you can use the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00. This will flip the axle so your axle will sit under the leaf springs and lift your trailer the height of the axle and leaf spring stack. I have attached an installation...
view full answer...
Suspension Lift for 2015 Lance 1575 Trailer
Sounds like you have a Dexter Torflex axle on your 2015 Lance 1575 and you are looking for the correct lift kit for it. You'll need to check out the axle to determine which exact one you have. Lift # K71-707-01 is for #10 Torflex axles with 2,300 to 4,000-lb capacities. Lift # K71-723-01 works with #9 Torflex axles with a 2,000-lb capacity. From what I could find on your 2015 Lance 1575 it looks like you have a #10 Torflex axle which means you need part # K71-707-01. Each of these lift...
view full answer...
Will the Axle Lift Kit # K71-723-01 Fit My 3,500 Pound Dexter Axles?
I have a great alternative for you. I reached out to my tech at Dexter Axle with your provided serial number (thank you!). He confirmed that the Torflex Lift Kit - Single Axle - 2-5/8" Lift # K71-723-01 is not compatible with the specs on your axle. However, he did confirm that the kit you need is the Torflex Lift Kit - Single Axle - 2-5/8" Lift # K71-707-01. The reason why you need this second kit is because it is designed to fit with your 3,500 pound axles whereas the # K71-723-01 is...
view full answer...
What Is the Correct Lift Kit for an Airstream Trailer with Torsion Axles
I don't know what axles you have on your trailer but if you look at the axle tag it will tell you this. If you can't comprehend the axle sticker then just send me a photo of this and I will be happy to do that for you. There are a few different lift kits for torsion axle trailers but they vary by manufacturer and capacity. I have attached the options below: Tandem Dexter #11 Torflex Axle (4,100 - 6,000 Lbs) # K71-724-02 Tandem Dexter #10 Torflex Axle (2,300 - 4,000 Lbs) # K71-707-02 Single...
view full answer...
Lift kit Compatible with Lance 1475 Model year 2017
Your 2017 Lance 1475 has the Dexter #10 torsion axle. The lift kit for that axle is # K71-707-01. This will lift your trailer frame by 2-5/8 inches you requested.
view full answer...
Lift Kit for 2k Torsion Alxe, and Wheels And Tires for 1994 Jayco 1206 Popup
Hello Mike. For lifting your 94 Jayco 1206 popup rv I recommend adding the Torflex Lift Kit - Single Axle - 2-5/8" Lift # K71-723-01. I would double check your axle weight capacity, this kit is good for a #9 Torflex axles with a 2,000-lb capacity, and is NOT compatible with top-mounted torsion axles. I don't blame you on wanting a tire that are safe to drive over 62mph. The 20.5/8-10 is an older tire size that is equivalent to the 205/65-10. I recommend swapping out your 20.5/8-10 to...
view full answer...
Lift Kit for 2002 Palomino Colt CH Pop-Up
Hi Sherwin; is the torsion axle a Dexter Torflex? The only lift kits we have are for the Torflex. If you have a Lippert or some other brand you will have to check with the manufacturer to see if a lift kit is available. Based on that capacity you would need the Torflex Lift Kit # K71-723-01 for a #9 Torflex or # K71-707-01 for a #10 Torflex. You will have to check your axle tag to see which one you have. Assuming you have a 5 on 4-1/2 bolt pattern right now you could switch to the Kenda...
view full answer...
Lift Kit Availability for Dexter Torflex Axle on R-Pod R-177
If you are referring to a lift kit then we have 2 different options for you to choose from if you have a Dexter Torflex axle. If you have a #9 Torflex axle with a 2,000 lb capacity then you want part # K71-723-01. Should you have a #10 Torflex axle with a 2,300 lb - 4,000 lb capacity then you will want part # K71-707-01 instead. Either of these kits will give you a 2-5/8" lift on your 2017 R-Pod R-177.
view full answer...
Options to Raise Height of 2007 Wells Cargo Model TW101 Trailer
According to the photo you sent in your 2007 Wells Cargo Model TW101 trailer has a 3,500 lb axle which means it has a 2-3/8" diameter. If you aren't able to use an over-under conversion kit like the part # K71-384-00 then the only other way for you to raise the height of your trailer is to use taller spring hangers. I'm not sure what size hangers you currently have but I have attached a link to our selection of hangers that you can filter through. Please note that you will need to have...
view full answer...

< Previous

12 3. . .6

Next >

Do you have a question about this Trailer Suspension Part?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

Adam R

Installed by:

Jeff D

Written by:

Wilson B

Updated by:

Brian T

Updated by:

Michael B

Updated by:

Manda E

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.