Lift Kit for 2k Torsion Alxe, and Wheels And Tires for 1994 Jayco 1206 Popup
Updated 12/15/2025 | Published 11/05/2024 >
Products Featured in This Question
Question:
I have a 94 Jayco 1206 popup rv. I plan on using lift kit for the torsion suspension to increase the ride height. I also want to upgrade the wheels/tires. It currently has the 20.5/8-10 tires only rated for 62mph. Question: what wheel size will fit the current 4-lug hub and allow me to 1. use tires that have practical speed ratings larger diameter and 2. use a tire size that is common stock at tire shops if I have a blowout away from home?
asked by: Mike
Expert Reply:
Hello Mike.
For lifting your 94 Jayco 1206 popup rv I recommend adding the Torflex Lift Kit - Single Axle - 2-5/8" Lift # K71-723-01. I would double check your axle weight capacity, this kit is good for a #9 Torflex axles with a 2,000-lb capacity, and is NOT compatible with top-mounted torsion axles.
I don't blame you on wanting a tire that are safe to drive over 62mph. The 20.5/8-10 is an older tire size that is equivalent to the 205/65-10. I recommend swapping out your 20.5/8-10 to the Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range B # AM3H330, the weight rating on this tire is 81 MPH so we can get you out of that slow lane. This tire goes onto a 10" wheel like you already have, so if you want you can just purchase the tires Loadstar K399 Bias Trailer Tire - 205/65-10 - Load Range B # AM1HP50 and get them installed on your current wheels. I also recommend getting one as a spare so you have it on hand for emergency situation.
Product Page this Question was Asked From
Torflex Lift Kit - Single Axle - 2-5/8" Lift
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Torflex Lift Kit - Single Axle - 2-5/8" Lift
- Shop: Lippert Trailer Idler Hub Assembly for 2,200-lb Axles - 4 on 4" - Pre-Greased
- Shop: Lippert Trailer Idler Hub Kit for 2,200-lb Axles - 13" to 15" Wheels - 5 on 4-1/2"
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range C
- Search Results: fenders
- Shop: Vehicle Brakes
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Trailer Hub - AKIHUB-440-2-EZ-2K
- Q&A: Torque Rating For the Four Bolts On The CE Smith Trailer Hub # CE13100
- Shop: Timbren BES Disc Brake Rotor - Rear Wheels - Black
- Video: The Low-Down on the Torflex Lift Kit
- Q&A: Lift Kits Available for Torflex Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Q&A: Lift Kit for a Dexter #9 Torflex Axle
- Shop: Headache Rack
- Q&A: Converting 3,500 lb Torsion Axle to Spring Leaf Axle on Boat Trailer
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Hands-On with the Hub Saver Hub and Wheel Protector


Kate F.
12/15/2025
Hey Mike, how did things go with the Torflex lift kit and the Kenda tires on your Jayco popup? Did the new setup give you the extra clearance and higher speed rating you were looking for? Your update could make it easier for others upgrading older campers.