What Lift Kit Fits 2018 Scamp Trailer With Lippert LC120 2,200 lb Axle

Published 12/10/2024

Products Featured in This Question

Torflex Lift Kit - Single Axle - 2-5/8" Lift

(795)

$156.86

Correct Track Trailer Alignment and Lift Kit - Single Axle

(55)

$201.28

Question:

2018 Scamp 13 with a Lippert LC120 2200 axle. Is there a lift kit available for this configuration? Thanks

asked by: Bob D

Expert Reply:

Hey Bob, thanks for reaching out. We may have a lift kit for you but I was not able to fine any references for the Lippert LC120 part number you provided, so I will need a bit more information on your axle. Specifically I will need to know if you axle is a torsion axle or a round tube leaf spring axle.

If you have a torsion axle, you can use the Torflex Lift Kit # K71-723-01 with 7-3/4" between bolt holes on center or the # K71-707-01 if it is a #10 with 8" between bolt holes on center. I do suggest you check the bolt spacing on your axle to confirm fitment.

If you have a round tube axle, the Correct Track Trailer Alignment and Lift Kit # LC87120 is what you will need. The provides either a 1-1/4" or 2-1/4" lift.

expert reply by: Jesse M

Bob D.

12/10/2024

It is a torsion axle on a 2018 Scamp 13 foot camper. I am measuring 9 inches center to center on the bolt heads. The axle has a 2200lb capacity and was manufactured on 08/24/2017. It is a small lightweight fiberglass camper. It has a Lippert customer part number 21737 on the label and a model designation of LC120. Need to lift but cannot find the kit. Thanks for your help and expertise.

Jesse M.

12/10/2024

@BobD So we do have the Torflex Lift Kit # K71-725-02 which has holes 9" apart on center but this is made for larger axles 5,500-7,000-lb capacities so the blocks themselves may not match up to the axle exactly since it technically isn't made for a 2,200 lb axle. This is our only option with holes at 9" though so the only other option would be to have a welder fabricate lift blocks for you.