Lift Kit Components Needed For A 2013 Forest river Rockwood Signature Ultra Lite 8280WS

Updated 06/03/2024 | Published 05/28/2024

Products Featured in This Question

Torflex Lift Kit - Single Axle - 2-5/8" Lift

(866)

$107.40

Dexter Trailer Springs Over-Under Conversion Kit

(856)

$75.64

Dexter Trailer Springs Over-Under Conversion Kit

(856)

$82.90

Question:

2013 rockwood signature ultra light 8280ws. Bolt spacing 61/2” o/c. Do you have a lift kit for this?

asked by: Allen C

Expert Reply:

Hey Allen,

Does your trailer have torsion axles or do you have a leaf spring suspension? If you have a torsion axle I'll need to see the axle tag in order to ensure you're getting a compatible lift riser. If you have a leaf spring suspension and your leaf springs sit below your axles then could go with an over-under conversion kit # K71-384-00 (2-3/8" diameter axles) or # K71-385-00 (3" diameter axles). With these kits you'd get a lift comparable to the diameter of the axle plus the height of the leaf spring stack.

expert reply by: Kevin C

Allen C.

6/1/2024

Torsion axles by AL-KO , serial number 0445564900 1-051263000180, p/n 14401775, I hope you have something that will work, really need to raise this trailer.

Allen C.

6/2/2024

@AllenC

Allen C.

6/1/2024

The correct bolt spacing is 6 1/4 inch

Kevin C.

6/3/2024

@AllenC The Dexter lift kits unfortunately aren't a fit with AL-KO axles and Lippert has discontinued their torsion axle riser kits so there unfortunately isn't one available with a 6-1/4" bolt spacing at this time. You could try to see if Dexter might custom make one for you or you could see if a local welding/fabrication shop would be willing to build you a riser kit.