See what our Experts say about this CE Smith Boat Trailer Parts

• Recommended Roller Bunks Replacement for Wooden Bunks for G3 1860 Boat
  We do have a variety of roller bunks that can be used as a direct replacement for carpeted bunks. I recommend either going with the 2,500 lb capacity which comes in Black # DL21754 or Silver # DL21740, OR the 3,000 lb capacity which also comes in Black # DL21755 or Silver # DL21741. I have also attached a link to all of the options that you can check out, as well as a link to all of our brackets if they also need replacing.
  view full answer...
  
• Recommended Upgrades to CE Smith Boat Trailer Model 48810
  Upgrading the carpeted bunks on your CE Smith Boat Trailer to roller bunks like the CE Smith # CE27710 is a great way to upgrade the trailer. These will allow for much easier loading and launching of your boat and reduce the stress put on your hand winch during operation. These are 5-foot-long bunks that will work perfectly to replace the 5-foot bunk boards on the trailer. You can use the Bunk Brackets # CE10003G-4 to mount them to the trailer. It looks like the trailer is equipped with...
  view full answer...
  
• How Would Roller Bunks Install on Karavan Boat Trailer
  Since the picture you submitted belongs to Karavan I can't post it here on our site, but if you check out the attached picture you can see how a very similar trailer had a set of rollers like the part # CE27710 installed. For a set of swivel brackets like what you see in the picture that are holding the bunks you'd then want the part # CE10003G-4. I also attached a couple install video links for you to check out as well.
  view full answer...
  
• Are Tall Bolster And Swivel Brackets Available For A Boat Trailer
  Hey Robert, The largest option we currently offer is the CE Smith # CE10196G-4, which has a 16-1/4" overall height. The bolster bracket is 15" long.
  view full answer...
• Boat Trailer And Bunks For Hauling True Kit Discovery 4.0 13.1' Inflatable Catamaran
  Hello Ash, thanks for reaching out. It sounds like you are on the right track here because the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks # CE48870 is definitely a good choice for hauling an inflatable catamaran. The roller bunks are also a good idea for raising the boat while hauling, and for assisting with loading and unloading. It sounds like you are wanting to do a 7' bunk so two of the 4' Long Roller Bunks # CE27700 on each side would do fine. You are correct that...
  view full answer...
• Roller Bunks and Brackets for 5.2 meter Fiberglass Cabin Boat
  Hey Garry, we have 5 foot long roller bunk sections like the part # CE27710 as well as 4 foot sections like part # CE27700. You'd want to order a quantity of both that would get you to the 5.2 meter length of your hull that matches the best. Then for a set of swivel brackets you'd want the part # CE10003G-4 for a set of 4 and for u-bolts to mount them part # CE15283GA-4 would be a great solution.
  view full answer...
• Are CE Smith Roller Bunk Brackets Compatible with Dutton Lainson Roller Bunks
  Hey Rusty, yes the Dutton Lainson roller bunks part # DL21740 are compatible with the swivel bracket assemblies part # CE10003G-4.
  view full answer...
• Recommended Roller Bunks for a 1998 Starcraft 1810LX Bowrider Boat Trailer
  I would be happy to! The most flexible solution for your 1998 Starcraft 1810LX Bowrider is going to be the CE Smith Roller Bunks for Boat Trailers item # CE27700 which are 48" long or item # CE27710 which are 60" long. Each roller bunk has a 1,500 lbs so they will work great for your 2,600 lbs boat. These can then be attached to your trailer with the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks item # CE10003G-4. They will make life much easier when compared to the...
  view full answer...
• Recommended Roller Bunks For LoadRite PWC Trailer
  The CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair # CE27710 will work well for your LoadRite trailer. If you want the 4 foot option, you can use # CE27700. This will work with the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4 # CE10003G-4. These brackets will follow the contours of your boat. For installing the brackets, I recommend the CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x...
  view full answer...
  
• Can 5' Roller Bunks Be Used in Place of 7' Bunk Boards for a 15' Sail Fish Center Console Boat
  We have had this come up before and the manufacturer stated that the CE Smith Roller Bunks for Boat Trailers # CE27710 would work for a 15' boat in place of your 7' bunk boards as long as the cross members are 56 inches or less. Which your 50" spread is. You can mount them to the existing bunk boards on your trailer or you can use the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks # CE10003G-4.
  view full answer...
  
• How To Install Roller Bunks on a Malone Watersport Trailer
  In order to convert your Malone trailer from a roof rack on wheels to a full on boat trailer with roller guide-on's, I recommend using the CE Smith Roller Bunks for Boat Trailers part # CE27700 and CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks part # CE10003G-4. The crossbars and brackets will need to removed and then you can install the swivel brackets to the crossmembers and the bunk rollers to the swivel brackets. That said, you will still need u-bolts that match the...
  view full answer...
  
• Comparing the Dutton-Lainson and CE Smith Roller Bunks
  I would be happy to compare the Dutton-Lainson Roller Bunks item # DL21741 and CE Smith Roller Bunks item # CE27710 but there's not that much of a difference. Both are 5 foot long and have 6 rollers per section. Each section is rated for 1500 pounds. Both are made with galvanized steel and heavy duty black rubber rollers. The main difference besides price is the shape of the rollers is not exactly the same. The CE Smith rollers are more round where the Dutton-Lainson are boxy and almost...
  view full answer...
• Can I Use Roller Bunks and Carpeted Bunk Boards Together on Boat Trailer
  I'll start off by saying that I've seen quite a few boat trailers that use a combination of rollers like the CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair # CE27710 and a carpeted bunk like the CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair # CE27845. The rollers definitely help if you're on a lot of shallow or steep boat ramps and combining the two gives you the best of both worlds, with the rollers on the bottom and boards...
  view full answer...
• How To Install The CE Smith Roller Bunks for Boat Trailers # CE27710
  If you have adjustable brackets for the bunk boards then you could lower them down and mount the CE Smith Roller Bunks for Boat Trailers # CE27710 directly to them. If you don't have adjustable brackets then you would need to remove the bunk boards and install new brackets like the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks # CE10003G-4. These brackets can be attached to the frame of the trailer with U-bolts like the CE Smith U-Bolts # CE15283GA-4. You'll want to measure...
  view full answer...
  
• Best 5 Foot Roller Bunks for a Jet Ski Trailer
  Yes, we do have a set of 5 foot roller bunks. They are the CE Smith Roller Bunks for Boat Trailers item # CE27710. These bunks have six rollers each, are 5' long, and have a 1,500 lbs capacity. These roller bunks come in pairs and will be perfect for your jet ski. You will also need the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks item # CE10003G-4 to attach the roller bunks to your jet ski trailer.
  view full answer...
• Roller Bunks For 8 Foot Long Bunk Boards on Jet Ski Trailer
  Since you have 8 foot wooden bunks already, you can indeed just mount the roller bunks directly to the wooden bunks with 3/8" lag screws, and you're correct you'd need four of the CE Smith Roller Bunks for Boat Trailers - 4' Long # CE27700. The lag screws are something you'd have to pick up at your hardware store, and that's the route I'd go since it's just easier overall (and just as safe) than removing your current bunks. But if you're more comfortable removing your current bunk boards...
  view full answer...
• How To Choose the Correct Roller or Carpeted Bunk Boards for a Trailer
  The size of bunk board or bunk roller you will need for your boat trailer is based off the hull size. However, generally speaking the manufacturer knows what size roller/bunk works best for the boat/trailer. Therefore I recommend using the same size that the trailer came with but it wouldn't hurt to go a bit longer if you have room. If you are switching from rollers to carpeted bunk boards then I would go longer. For the carpeted bunk board option we have part # CE27800 which are 36" long,...
  view full answer...
  
• Recommendation For Adding Bunks or Rollers to a Calkins Boat Trailer for a 21' Boat
  As far as size is concerned, you want the bunks/rollers to be at least half the length of your boat. Whether bunks or rollers are the better option really comes down to your use. If you take your boat on and off of the trailer quite a bit, then going with rollers would be a good choice. The boat will smoothly roll over the bunks which is easier and less taxing on the hull of the boat. Given the size of your boat you would need to use 3 of each product below: - CE Smith Roller Bunks for...
  view full answer...
• Comparing Dutton-Lainson and CE Smith Roller Bunks
  There isn't a whole lot of difference between Dutton-Lainson roller bunks # DL21741 and CE Smith roller bunks # CE27710. Both have 5 foot long sections. Each section is rated for 1500 pounds. There are 6 rollers per section on both. Both are made with galvanized steel and heavy duty black rubber rollers. The main difference besides price is the shape of the rollers is not exactly the same. Either set can be mounted on a bunk or independently. To mount independently you would need the...
  view full answer...
• Roller Bunk Recommendation for a Boat Trailer with Wood Bunks
  The CE Smith Roller Bunks, # CE27700, that you referenced would be a great option for your boat trailer. These roller bunks are 4 ft long and they can be mounted directly on top of your current wood bunks. You can also use the CE Smith Mounting Brackets, # CE10003G-4, if you want to replace the wood bunks with the roller bunks. Keep in mind, these bunks have a weight capacity of 1,500 lbs, but based on your photo, I do not think you will have much of an issue with that.
  view full answer...
  
• How to Add Bunk Boards to Malone MicroSport Trailer
  To add bunk boards to the Malone MicroSport Trailer # MPG460G you'll want 2 of the Bunk Kit # MPG561 which actually installs on the crossbars. Since the Malone trailer frames are different you'll need to source U-Bolts to install the CE Smith Bolster and Swivel Bracket Assemblies # CE10003G-4 locally as we don't have any standard-sized U-Bolts that fit the MicroSport.
  view full answer...
• Roller Bunks For Shorelander Boat Trailer And Lund Fury 1600 Aluminum Boat
  You have a couple of options for rollers on your Shorelander trailer. If you want to completely cover the 7 foot bunks you currently have, you can attach a 4 ft roller like part # CE27700, and cut another to cover the 7 ft board. If you do mount the roller bunks to the boards you currently have you will want to make sure your rollers for the bow are adjusted at the proper height to offer support for the boat when loaded. I have attached a link to our boat trailer parts. Another option...
  view full answer...
• Brackets To Install Bunks on 2010 Karavan # KBE-1250-46 Boat Trailer
  We do not have a way of determining which bunk brackets your Karavan trailer might use, but I may have a solution. If you have one already you could take photos and throughly measure it so we can look at our inventory of parts. In the mean time I have posted a link that shows many of our bunk brackets. I hope this is helpful.
  view full answer...
• Recommended Roller Bunks For Commercial Crab Boat 5,000-6,000 lbs
  For your Commercial Crab Boat, I recommend the CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair # CE27700. These 4 foot long rollers are 4-3/4 inches wide x 2-1/2 inches diameter. I recommend using the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4 # CE10003G-4 to support it. I would use extras for more support and better weight dispersion on your frame due to the size and weight of your boat. As long...
  view full answer...