This rust-resistant bolster bracket helps support 1 bunk board on your boat trailer when used with a swivel bracket (sold separately). Mounting slots allow for height adjustment. Dimpled surface helps keeps bracket from sliding along trailer frame.
Features:
Specs:
Bolster brackets are typically mounted upright on a boat trailer's crossmembers. When used with a swivel bracket (sold separately), they allow a mounted bunk board, which is run from the front of the trailer to the back, to pivot while you are loading a boat. On kayak trailers, these brackets are mounted to the trailer's frame and support bunk boards that run across the trailer.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com, and today, we're gonna take a look at the CE Smith Galvanized Steel Bolster Bracket. Now, bolster brackets are typically mounted upright on a boat's trailer's crossmembers, and when used with the swivel bracket, they allow a mounted bunk board, which is run from the front of the trailer to the back to pivot while you are loading a boat. On kayak trailers, these brackets are mounted to the trailer's frame and support bunk boards that run across the trailer. This rust-resistant bolster bracket helps support one bunk board on your boat trailer when used with a swivel bracket, two brackets are required per bunk board, and additional bracket is sold separately. The dimpled surface helps prevent the bracket from sliding along your trailer's frame, and these mounting slots are gonna permit as much as 2 3/4 inches of height adjustment during installation, and the bracket installs vertically on your boat's trailer's frame with a U-bolt. This is made in the USA of 11-gauge galvanized steel that will resist rust and corrosion.
Galvanized steel parts are hot-dipped in zinc after being stamped, this creates a coating that is typically three millimeters to five millimeters thick, and this thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding, so this is gonna be suitable for saltwater exposure. You are gonna get one bracket. Let me give you some overall dimensions here just to give you an idea of the size. So the overall height, we're gonna be sitting right at eight inches tall, and with our width, we're gonna be sitting right at 2 1/2 inches wide. And as I said, the length of the mounting slots measure right at 2 3/4 inches, so you're gonna get 2 3/4 inches of height adjustment on these mounting slots, and they are sitting right at half an inch wide, and then the spacing between those slots are also right at half an inch, and the swivel bracket mounting hole diameter is half an inch.
Now, check out our website here at etrailer.com if you need U-bolts or swivel brackets or bunk boards, we have a variety of options for you to choose from that will best work for your trailer. Well, that's gonna conclude our look today, I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me..
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.