Comparing the Dutton-Lainson and CE Smith Roller Bunks

Question

Question:

Whats the difference between item#DL21741and item#CE27710

asked by: Thurman O

0

Expert Reply:

I would be happy to compare the Dutton-Lainson Roller Bunks item # DL21741 and CE Smith Roller Bunks item # CE27710 but there's not that much of a difference. Both are 5 foot long and have 6 rollers per section. Each section is rated for 1500 pounds. Both are made with galvanized steel and heavy duty black rubber rollers. The main difference besides price is the shape of the rollers is not exactly the same. The CE Smith rollers are more round where the Dutton-Lainson are boxy and almost square.

Either set can be mounted on a bunk or independently. To mount independently you would need the brackets. For the Dutton-Lainson set you would use item # DL21742 and for the CE Smith set you would use item # CE10003G-4.

expert reply by: Jerred H

0

Answer 1

Hey Jon, the rollers on the Dutton Lainson Boat Trailer Roller Bunks part #DL21741 that you referenced are non-marking and would not leave marks on your jet ski.

view full answer...

Answer 2

Hey Dave, As long as your current 2"x4" bunk boards are in good shape, you'll just want a hand full of 1-1/2" long lag bolts, preferably 1/4" or in diameter, to secure the Dutton-Lainson Boat Trailer Roller Bunks #DL21741. You…

view full answer...

Answer 3

We do have a variety of roller bunks that can be used as a direct replacement for carpeted bunks. I recommend either going with the 2,500 lb capacity which comes in Black #DL21754 or Silver #DL21740, OR the 3,000 lb capacity which also comes in Black…

view full answer...

Answer 4

Thanks for the picture! To be able to install the 5' Dutton-Lainson Boat Trailer Deluxe Roller Bunk #DL21741 on your trailer you can simply bolt them to your existing carpeted bunks due to you not having any center supports on your trailer. Keep…

view full answer...

Answer 5

We have the CE Smith Roller Bunks for Boat Trailers #DL21740 which is a set of galvanized roller bunks that are 4 feet in length. These will work great in a saltwater application since galvanized steel holds up well.

view full answer...

Answer 6

I apologize for all of the confusion. I can tell you with absolute certainty that the Dutton-Lainson Roller Bunk Bracket, #DL21762, will pivot to allow the roller bunk to conform to the angle of the boat or watersport vehicle's hull. The hook…

view full answer...

Answer 7

You can use the 5 foot long Dutton-Lainson deluxe roller bunk #DL21741 on your 8 foot bunk, and you would just locate it in the middle of the bunk. I also offer the Dutton-Lainson roller bunk, part #DL21740. This is a 4 foot long roller bunk, so you…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Comparing the Dutton-Lainson and CE Smith Roller Bunks

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching