See what our Experts say about this Yakima Roof Rack

• Recommended Roof Rack for Using Two Hullavators on a 2024 Ford Bronco Hard Top
  Hey Tina! Not sure what roof rack setup you were using on your Jeep but I checked with Thule and they do not have one that will work with a Hullavator item # TH898 on a 2024 Bronco. To mount and use two Hullavator item # TH898 on a 2024 Ford Bronco 4 door hard top with factory raised roof rails you will need the following parts: TimberLine Towers for Yakima Crossbars item # Y33TR 70" Long - Yakima JetStream Crossbars - Aluminum - Black item # Y00427 The 70" bars are the next size up...
  view full answer...
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback Wagon
  I went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
  view full answer...
• Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
  To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy Tahoe
  Hi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
  view full answer...
• Easily Loading and Carrying 2 Kayaks on a 2017 GMC Denali XL
  A roof rack is required first and if you are looking to ease the loading, a lift assist would be important too. The Yukon XL roof weight limit is 150 pounds so that is important in selecting rails, loading 2 kayaks, and their carriers. Yakima makes a solid roof rack option with their 66" roof rack system including parts # Y00410, # Y53TR, # Y03536, # Y00243 A side loading kayak carrier such as the Thule Hullavator # TH898 would help you a great deal loading kayaks. The video below...
  view full answer...
• Recommended Crossbars for Yakima Top Tracks On an A.R.E Camper Shell CX Series
  The Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT is not actually meant to be installed into top tracks. This crossbar system is actually meant to be installed in fixed points on your camper shell so it's not going to work with your Yakima tracks. Yakima does offer a complete system - # Y47CV which includes everything, but since you already have the tracks you'd just need the crossbars # Y00427, the landing pad # Y00221, and the towers # Y53TR. These bars and...
  view full answer...
• Converting RetraxONE MX Tonneau Cover on a 2021 Ford F-150 5-1/2' Bed To Add Crossbars Above Bed
  I have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails # RTT-82381 on the Cover # RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac # A54KG would be an option as this places the rails about half way up your window and attaches to the stake bed pockets. If you go the route of the T-Slots you will want the Yakima Crossbars # Y00427, Towers # Y53TR and 2 sets of the Landing Pads # Y00221. For your keys you...
  view full answer...
• 2019 Ram 1500 Fitment for Yakima HD Tracks and Tonneau Cover
  As long as you can fit the 2" wide Yakima 60" HD Tracks # Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26 # Y75ZR and SkyLine Towers # Y53TR for a base system. The 66" Round Crossbars # Y00410 might work but I'm not sure if you'll have the clearance for that since I'm not sure where the Yakima tracks will sit. If they truly can sit in the middle of your rails...
  view full answer...
  
• Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers?
  The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
  view full answer...
• Will the Truck Hero Elevate Rack System Work With Yakima Roof Rack
  Yes, the TS (T-Slot) Rails for Truck Hero Elevate Rack System part # TH85FR is a universal track system that works with most inside the bed rail mounted tonneau covers. The tracks will then accept pretty much any track mounted accessory. In order to add a Yakima system you would need the following: SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 (2) Yakima JetStream Crossbars part # Y00427
  view full answer...
• Are Rhino-Rack and Yakima Lock Cores Interchangeable for a 2013 Ram 2500
  The Rhino-Rack key and lock systems are not interchangeable with the Yakima SKS lock systems. I noticed you are looking at # Y02-500B which mounts in tracks. The tracks would have to be installed by drilling into the vehicle roof. If you want to avoid that and still have a Yakima rack you can look at other roof rack options for your 2013 Ram 2500. Provided that the truck has the Crew Cab you can use the following Yakima roof rack parts: JetStream Bars # Y00427 or CoreBars # Y00423 BaseLine...
  view full answer...
• Recommended Thule Aero Style Bar for Lengths Longer than 60 Inch WingBar Evo for Subaru Outback
  Thule WingBar Evo Crossbars do not come in lengths beyond 60 inches. To get longer bars that are compatible with your Thule feet you will need to use their ProBar. The Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 # TH713600 can be cut to your custom length as the channels run the entire length of the bars. They still have an aero style with a top channel but they also have a rear channel and bottom channel that span the entire length to give you more mounting options. These...
  view full answer...
  
• Parts Needed To Mount Rhino Rack Awning RR33200 To Yakima SkyLine Towers
  Yes, I definitely recommend getting new crossbars with a top channel. The good news is you can use the feet you already have. It appears you have the Yakima SkyLine Towers # Y53TR. So the 70" Jetstream bars # Y00427 will be all you need to mount your Rhino Rack # RR33200 awning.
  view full answer...
  
• Why are the Malone SteelTop # MPG203 Not Confirmed to Fit My 2020 Toyota 4Runner with Raised Rails?
  I have a fitment answer for you. The reason why the Malone SteelTop Roof Rack - Square Crossbars - Raised, Factory Side Rails - Steel - 65" Long # MPG203 is not listed as a confirmed fit for your vehicle is because the 65" length of the crossbars are deemed far too long for your 2020 Toyota 4Runner Limited with raised factory rails. This is why the SteelTop 50" # MPG201 and SteelTop 58" # MPG202 are confirmed fits. You are right that the towers # MAL25YR will fit your vehicle. Also, another...
  view full answer...
• Is thule Hullavator Compatible with Yakima JetStream Bars for SNUGTOP Cap on 2018 Toyota Tacoma
  The Thule Hullavator Pro # TH898 is compatible with the Yakima JetStream bars as long as they stick out past the side of your SNUGTOP truck cap 4" - 8" so that it doesn't make contact with your truck cap (see attached photo). If you are just getting the Yakima tracks on your SNUGTOP cap then you also need 2 sets of the Landing Pad 1 # Y00221, Yakima SkyLine Towers # Y53TR, and a set of the JetStream bars. The JetStream bar sets are available in the following colors and lengths: Black...
  view full answer...
  
• Parts Needed to Install the PlusNut Hardware for Yakima Roof Racks on a Fiberglass Roof
  The Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks # Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks # Y01126 or the Yakima 54" Tracks for Roof Racks # Y01127 both these tracks include the PlusNut hardware. Since you have a fiberglass roof you will also need to get the Replacement Capnuts, Washers and Bolts # Y8810155 which is needed when installing on a fiberglass roof. To have a complete roof rack you would also need to pick up the Landing...
  view full answer...
• How To Install Yakima LockNLoad Over Truck Bed with Tonneau Cover
  In order to install the Yakima LockNLoad Platform Roof Tray above a tonneau cover on a truck bed you will need to install a set of tracks alongside the bed rails along with a crossbar system. The crossbar system is needed because the tray is not wide enough to reach just the mounting feet on the tracks. I have attached the needed parts below: Yakima JetStream Crossbars part # Y00427 Yakima Tracks for Roof Racks part # Y01135 Landing Pad Yakima Control Towers part # Y00221 (2) SkyLine Towers...
  view full answer...
• Yakima Towers Needed to Mount to Landing Pad 1 on Track System
  It looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
  view full answer...
  
• Roof Rack and Kayak Carrier Recommendation for Leer Camper Shell with Tracks on a Ford F-150
  I have what you need! Even though we have amazing options for installing a complete roof rack system on your Ford F-150 with a Leer camper shell, installing the WingBar Evo Crossbars onto a track system is a complicated process. This is because with the WingBar Evo crossbars, they come with bottom channels that do not extend the entire length of the bottom of the crossbar. With that being the case, there is no way to fully determine what WingBar Evo crossbars you need unless we have the...
  view full answer...
• Can I Mount 70-Inch JetStream Crossbars with a Hullavator and Cargo Box on My 2022 Subaru Outback?
  Technically, it is possible to do this on your 2022 Subaru Outback Wilderness. However, the only concern with this setup is that the Yakima JetStream Crossbars - 70" # Y00427 are such long crossbars that extend past the feet on your vehicle. This may not only be illegal, it can be dangerous. We do not recommend doing this setup. I attached a video that shows just how far these crossbars protrude from a similar-sized vehicle. If you were to mount the crossbars, the compatible feet would...
  view full answer...
• What Rack is Needed to Fit Two Thule Hullavators on a 2020 Ford Expedition?
  Mounting two Hullavators # TH898 requires 57 inches of crossbar length (inside of the mounting points) and a minimum of four inches on both ends outside of the feet to operate. With that being said, you will need crossbars with a minimum length of 65 inches. The Yakima JetStream crossbars 70-inches # Y00427 will do the trick. The towers you need are the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR. However, I called my contact with Thule and he strongly...
  view full answer...
• Best Roof Rack System for 2001 Ford E350 Van
  The gutter mounts we have are actually really sturdy if you get the right ones and install them right. Technically, you should have more weight capacity off the gutter mounts since the weight is distributed vertically through the gutters vs racks bolted onto your fiberglass roof. A good system for your 2001 Ford E350 Van is the Rhino Rack system with Square Crossbars # RB1800B-2 and Gutter Feet # RL150S10. You can switch the square crossbars for aero ones with 71" Vortex Aero Crossbars...
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Do You Recommend the Thule Motion XT XL or the Thule Motion XT XXL for My 2021 Nissan Rogue?
  In order to determine the compatibility of either the Thule Motion XT XL # TH629806 or the Thule Motion XT XXL # TH629906, it truly depends on if you have a bare roof, raised rails, or a factory roof rack currently installed. The reason why this matters is because not only do crossbars come with different heights and widths, but your roof has different available length based on what roof setup you have. The roof setup is important in determining if you can fully open the rear hatch of your...
  view full answer...
• Recommended Way to Carry a Kayak for a Ford F-150
  As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch. In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Roof Rack Options that Fit 2012 Chrysler 300
  What install video are you referring to? Or what part number?
  view full answer...
• Recommended Spacing for Yakima Q7 Clip on 2015 Chevrolet 2500HD Double Cab with Yakima Cargo Basket
  The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great. I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof and...
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Roof Rack Recommendation for 2013 GMC Terrain for Carrying Thule Hullavator
  For your 2013 GMC Terrain with a naked roof you would want a Yakima roof rack like the JetStream part # Y00425, # Y28TR, and # Y06146 and you'd easily be able to carry a Hullavator # TH898. The Hullavator needs a rack that over hangs past the feet a few inches and can install into the top channel of this rack for an easy and secure install.
  view full answer...
• Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
  Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
  view full answer...
• Recommended Yakima 1/2 Roof Rack for 2010 Ford F-250 Crew Cab
  Yes, we do offer half roof rack systems for a 2010 Ford F-250. I recommend the JetStream which has an aero shape and integrated slots for use with channel accessories. I have attached the parts you will need for this below. Yakima JetStream Crossbar part # 8880650 BaseLine Towers for Yakima Crossbars part # Y62TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y79QR
  view full answer...
• Is There a Replacement For Yakima Base Clip 200
  I can do you one better, and instead of an exact match, I can get you the Yakima Base Clip 200, which is the following part number: - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y79QR I did verify directly with Yakima that this is the Base Clip 200.
  view full answer...
• Recommended Roof Rack And Roof Basket For 2004 Ford F-250 w/ Naked Roof
  Since your 2004 Ford F-250 Crew Cab has a naked roof without side rails, I recommend going with Yakima JetStream Crossbars item # Y00426, along with Towers item # Y28TR, and the BaseClip Fit Kit item # Y79QR. This is an aerodynamic roof rack that has less noise and vibration than other roof rack setups. It features the common T-slot channel on top for accessories to be easily installed. You can also add Locks item # Y07204 to secure the rack to your roof. To add a cargo basket you will...
  view full answer...
• Recommended Roof Rack for a 2011 Ford F-250 Crew Cab Using a Yakima Cargo Basket
  It is a lot of information. The best way to add a set of crossbars to mount the Yakima OffGrid Roof Cargo Basket item # Y07139-09 to the roof of your 2011 Ford F-250 crew cab is to use the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y49UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y79QR This is a flush mounted roof rack that does not extend over the sides...
  view full answer...
• BaseClip Fit Kit For a 2000 Ford F-350 Super Duty SuperCab or Crew Cab
  Your 2000 Ford F-350 with either the SuperCab or Crew Cab will need the BaseClip Fit Kit # Y79QR. The Kit # Y06192 you found is for a Lexus RZ. We do have the Yakima BaseLine Roof Rack # Y26KB which will include the crossbars, towers and fit kit for you to install on your roof.
  view full answer...
• Roof Rack Recommendation for 2007 Ford F-350 Super Duty
  The Whispbar roof racks were discontinued awhile back, so unfortunately we won't be getting any more of the K469 clamp kits in. To provide a roof rack on your 2007 Ford F-250, I'd recommend a Yakima JetStream roof rack that would be assembled from the following parts: • 70 Inch JetStream Aero-Style Crossbar, part # Y00427 • Yakima BaseLine Roof Rack Towers, part # Y28TR • Yakima Vehicle-Specific Fit Clips, part # Y79QR I've linked to a product demonstration video featuring the Yakima...
  view full answer...
• How Many Crossbars Does a Yakima Fit Kit Work With
  You are correct the Yakima Fit Kits like part # Y79QR are sold in pairs or a single crossbar. So to do a setup that includes both crossbars you'd need a quantity of 2 fit kits.
  view full answer...
• Can I Get The Yakima BaseClip 200
  Yes, we do carry the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y79QR. These are the BaseClip 200 that will fit your 2001 Ford F-250 Super Duty. I have included a product description link below.
  view full answer...
• Recommended Yakima 1/2 Roof Rack for 2010 Ford F-250 Crew Cab
  Yes, we do offer half roof rack systems for a 2010 Ford F-250. I recommend the JetStream which has an aero shape and integrated slots for use with channel accessories. I have attached the parts you will need for this below. Yakima JetStream Crossbar part # 8880650 BaseLine Towers for Yakima Crossbars part # Y62TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y79QR
  view full answer...
• Is There a Replacement For Yakima Base Clip 200
  I can do you one better, and instead of an exact match, I can get you the Yakima Base Clip 200, which is the following part number: - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y79QR I did verify directly with Yakima that this is the Base Clip 200.
  view full answer...
• Recommended Roof Rack And Roof Basket For 2004 Ford F-250 w/ Naked Roof
  Since your 2004 Ford F-250 Crew Cab has a naked roof without side rails, I recommend going with Yakima JetStream Crossbars item # Y00426, along with Towers item # Y28TR, and the BaseClip Fit Kit item # Y79QR. This is an aerodynamic roof rack that has less noise and vibration than other roof rack setups. It features the common T-slot channel on top for accessories to be easily installed. You can also add Locks item # Y07204 to secure the rack to your roof. To add a cargo basket you will...
  view full answer...
• Recommended Roof Rack for a 2011 Ford F-250 Crew Cab Using a Yakima Cargo Basket
  It is a lot of information. The best way to add a set of crossbars to mount the Yakima OffGrid Roof Cargo Basket item # Y07139-09 to the roof of your 2011 Ford F-250 crew cab is to use the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y49UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y79QR This is a flush mounted roof rack that does not extend over the sides...
  view full answer...
• BaseClip Fit Kit For a 2000 Ford F-350 Super Duty SuperCab or Crew Cab
  Your 2000 Ford F-350 with either the SuperCab or Crew Cab will need the BaseClip Fit Kit # Y79QR. The Kit # Y06192 you found is for a Lexus RZ. We do have the Yakima BaseLine Roof Rack # Y26KB which will include the crossbars, towers and fit kit for you to install on your roof.
  view full answer...
• Roof Rack Recommendation for 2007 Ford F-350 Super Duty
  The Whispbar roof racks were discontinued awhile back, so unfortunately we won't be getting any more of the K469 clamp kits in. To provide a roof rack on your 2007 Ford F-250, I'd recommend a Yakima JetStream roof rack that would be assembled from the following parts: • 70 Inch JetStream Aero-Style Crossbar, part # Y00427 • Yakima BaseLine Roof Rack Towers, part # Y28TR • Yakima Vehicle-Specific Fit Clips, part # Y79QR I've linked to a product demonstration video featuring the Yakima...
  view full answer...
• How Many Crossbars Does a Yakima Fit Kit Work With
  You are correct the Yakima Fit Kits like part # Y79QR are sold in pairs or a single crossbar. So to do a setup that includes both crossbars you'd need a quantity of 2 fit kits.
  view full answer...
• Can I Get The Yakima BaseClip 200
  Yes, we do carry the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y79QR. These are the BaseClip 200 that will fit your 2001 Ford F-250 Super Duty. I have included a product description link below.
  view full answer...
• BaseClip Fit Kit For a 2000 Ford F-350 Super Duty SuperCab or Crew Cab
  Your 2000 Ford F-350 with either the SuperCab or Crew Cab will need the BaseClip Fit Kit # Y79QR. The Kit # Y06192 you found is for a Lexus RZ. We do have the Yakima BaseLine Roof Rack # Y26KB which will include the crossbars, towers and fit kit for you to install on your roof.
  view full answer...

Do you have a question about this Roof Rack?