To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These Rhino-Rack Heavy Duty crossbars are built to take on serious weight. With a 220-lb capacity and aluminum construction, they make hauling kayaks, canoes, SUPs, or cargo boxes a solid and secure experience. The bars measure 59" long x 1-5/8" wide x 1-7/8" tall, giving you plenty of space and strength for contractor-grade accessories or heavy adventure gear.
The square bar design gives your setup a stable foundation, while the top channels are ready for Rhino-Rack Heavy Duty accessories like ladder rollers, load stops, and eyebolts. Rubber strips inside the channels cushion your gear and help prevent slipping. Whether you’re tightening down a kayak or positioning cargo for a road trip, the setup stays steady mile after mile.
Security matters when your gear’s on the roof. The included RLTF legs use lockable cover plates that fasten the rack firmly to your vehicle’s tracks. Once everything’s in place, you know the bars aren’t going anywhere until you want them to. It’s a dependable setup that adds peace of mind when you park or head out on long drives.
Each part of this system is made to handle years of use in all kinds of conditions. The aluminum bars resist rust and corrosion, while the black finish keeps them looking sharp. The crossbars carry a limited lifetime warranty, and both the legs and tracks include 5-year limited warranties—so you’re covered for the long haul.
Alternate Instructions
Ratings & Reviews
Good track option because the slots allow you to add or remove square nuts as needed. Pretty robust feel as well!
Exactly what I was looking for I’ll follow up when I get the racks and some bikes and boats on it. Measure twice drill once bolt holes must be exact on the f150
The rails work great and installed easily. All installation hardware was included.
Well engineered rack that fits my Ram 2500 crew cab well. A bit of wind noise at highway speeds. I have the heavy duty cross pieces with a square cross section.
This is my second Rhino-Rack. They go on very easily and hold the bikes/kayaks and even an extension ladder very well....thanks for a great product
poor packaging, missing rubber ends and mounting hardware
Mostly satisfied. Not issue of etrailers and nothing really wrong with the product but do find it funny and a bit dumb that RhinoRack gives you security screws to hold feet to track but the rails are attached with a standard bolt that can be easily seen and accessed by anyone.
There was a small delay in shipping but I was contacted quickly by phone with a follow up email. Everything arrived sooner than I expected. The Rhino roof racks mounted easily and look good. Excellent customer service.
This rack worked out great... I installed in on a 2017 Ford F-150. We drove 6 hrs through wind and rain with a SUP and Tandem Kayak on top. It really took a beating in a storm the whole way. One bracket was a little loose and shifted because of the wind on the Kayak, but it held together. Super happy with Rhino rack!
I used the crossbar on the front of my UTV rollbar to hold a LED light and two sun visors. It worked perfectly. I used rollbar clamps made to fit the rollbar to hold the crossbar in place.
Very well packed and supported. Follow up was also good. The extrusion looks a bit thin, but otherwise well made.
This review is given after 1 week of use. Please take it for what it is worth without knowing the long-term performance of the product.
The good.
The package arrived a few days after ordering without delays.
All parts were properly packaged and all quantities were correct.
The rails seem sturdy and the finish appears that it will hold up over time.
The rails have a clean factory type look. I mounted them on the bed rails of my Jeep Gladiator.
They fit nicely next to my hard tri-fold tonneau cover frame.
The dimensions given online were accurate.
The not so good.
The descriptions online made me feel like this was a "universal" size track. It is not. It seems as though all of the major brands have proprietary T-bolt sizes. I am currently using elevator bolts that I hit with the bench grinder to hold accessories until I can find a good fit.
The price is right, and the product appears generally well-engineered. I'd be reluctant to label it as "heavy duty" however (as Rhino does), since they are made of extruded aluminum, and each tower is mounted by just two small square washers gripping the rails. Although the mounting hardware itself is sturdy stainless steel, I question the sturdiness of the rails themselves under a heavy load. Unfortunately, the competition likewise only makes aluminum rails, so the industry as a whole appears to have a very different concept of sturdy than I do. (I could have sworn they are described as steel when I ordered them, but I may be wrong about that).
Great tracks. They fit well on my 6-foot 04 Tundra Camper. I paired them with adjustable feet & crossbars from Sherpa Equipment. The combo is perfect. Thx etrailer. The tracks arrived in good condition and on time. Would definitely recommend if anyone is looking for affordable tracks.
Some parts are not usable.
Great product sturdy bars. Keep in mind anything you install on the bars needs to have longer bolts because of how big the bars are but that's a minor detail
Ok… giving this item four stars as an overall view. The good: it fits a Jeep Wrangler perfectly. With the appropriate legs, it canvases across the entire roof of the Jeep with the legs attaching to the gutters. The bad: just a bit too noisy for my liking, even with the appropriate wind faring (I don’t expect absolute silence since I have a one touch sky top). The noise is not a big deal on short trips, but it was definitely driving my wife and kids nuts on a 2+ hour drive (stick some headphones on the kids, problem fixed)
In the future, I might switch it up from these square rails and go with something a bit more aerodynamic…
Kit was great, except my SnugTop cover required longer T-Bolts for mounting the tracks. The 1.5 inch ones provided were too short. It was a little tough sourcing T/Bolts that would work. It would have been nice if longer T-Bolts could have been an option from Rhino Rack.
I mounted these rails in a non-traditional manner (on top of my truck bed caps so that I could crossbars that spanned over my existing tonneau cover). No one I talked with had actually done this type of installation before. The only problems I ran into were: 1) I had to cut the rails approximately 1/2 inch to ensure the through-bolts did not interfere with existing cap hardware, and; 2) The "Nyloc Nuts" were too wide to use so I just substituted a nut, lock washer and flat washer to compensate. Other than that, the installation took a while but came out great. And the RRRL T600 feet work perfectly with the rails. See the attached photo for the complete installation (with bikes attached) and a second photo with the rack removed by using the quick release feet.
Custom built a mixed Rhino-Rack and Thule bike carrier. Started with the RTC tracks, added Rhino-Rack crossbars, then Thule bike carriers. Customer support was very helpful in getting compatible parts. Took some ingenuity on my part, too, but I love the way it turned out!
This rack is awesome!
Rhino tracks are great - I installed on my truck topper per the great instructions that were included (see photos). The tracks flexed to meet the contours of my topper. All bolts are hidden by track and were long enough to go through topper where special knobbed nuts are used to secure. Total install took about three hours.
etrailer customer service came through to resolve several challenges on this order:
- I initially ordered Yakima tracks. There were long shipping times, so etrailer recommended different compatible tracks from Rhino that were $40 cheaper!
- the initial shipment had not arrived in nearly three weeks with no USPS shipping updates. etrailer sent a second set of tracks via a different shipper that arrived in a few days.
- unfortunately the replacement tracks were incorrect - too long and endcaps were missing.
- while eTrailer was arranging to resend the endcaps, the original USPS order arrived with the correct tracks and all parts.
- eTrailer had me keep the correct tracks and parts, and send me a label to ship the incorrect tracks back to them.
All of these interactions were made with very professional and friendly customer service staff. I felt like I was a valued customer!
Package came with no hardwares. Called CS, they send me hardwares with no nuts. Called CS again, says they will have to get with Rhino, never heard back from them again. Bought myself my own hardwares and custom washers. Will not order from them again.
"One year later, and these Rhino-Rack tracks are still holding strong—literally and emotionally. I’ve thrown everything at them: bikes, kayaks, a storage box full of camping gear, and at one point I’m pretty sure my dignity. They haven’t budged.
Installation was straightforward—though I did manage to invent some new curse words during the process, just for fun. Once on, though, they’ve been rock solid. No rust, no wobble, no mysterious rattles in the night.
Honestly, the only downside is now I have zero excuses not to carry everyone’s stuff. Family trip? ‘Brian’s got the roof rack.’ Neighbor moving? ‘Brian’s got the roof rack.’ Basically, I’ve become the neighborhood pack mule—but a stylish one, thanks to these tracks.
If you want reliability with a side of unsolicited popularity, these are your tracks."
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.