See what our Experts say about this Camco Propane Fittings

• Best Propane Regulator for a 2015 Coachmen Clipper 17BH
  The MB Sturgis Horizontal 2-Stage Propane Regulator part # 108221 and the Camco Horizontal 2-Stage Propane Regulator part # CAM59323 are both horizontal mount two stage regulators. You will not have any problems using either of them on your 2015 Coachmen Clipper 17BH. However, I recommend the MB Sturgis regulator as it can handle more Btu's in addition to having the capability of reducing water columns down to 9" which will allow for proper function in extremely cold temperatures. The Camco...
  view full answer...
• Replacement Regulator for a Marshall 230 Propane Regulator
  The replacement we have for your Marshall 230 Model Gas Regulator is the Vertical 2-Stage Propane Regulator - 160,000 Btu/Hr # CAM59313. If yours is still working fine I wouldn't recommend messing with it unless you are going to replace it altogether. Either way I can't advise you to use your regulator in a way that's not intended.
  view full answer...
• Can a Dual Propane Tank Regular be Used with Just One Tank
  Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks # CAM59005 has a valve on top that will automatically switch to a full tank so you could use it with one tank and it would just always be open to that tank. But if you will always be using one tank we have 2-stage regulators # CAM59313, # CAM59323, or # CAM59333 for a single propane source and they would be more ideal than the dual tank option.
  view full answer...
• Replacement 2-Stage Regulator for Marshall Model 260
  Camco part # CAM59333 will work as a replacement for your Marshall 260 Horizontal LP regulator. It includes a P.O.L. connector. If you do not need the P.O.L. connector then you can use the Camco Horizontal 2-Stage Propane Regulator # CAM59323. Your photo shows your regulator to be a horizontal type but you can confirm by verifying the the Marshall's vent opening faces down. Please refer to the linked video at the 20-second mark to see the vent on the Camco part.
  view full answer...
  
• Best Horizontal Dual Propane Regulator for RV
  We currently offer three different dual stage horizontal regulators for trailers. If you're looking for the best then I recommend the MB Sturgis Horizontal 2-Stage Propane Regulator part # 108221 as it's made here in the USA. The other options are the Horizontal Low Pressure 2-Stage RV LP Gas Regulator part # 37207-30385 and Camco Horizontal 2-Stage Propane Regulator part # CAM59323 which are great as well. There is always a potential for leaks but ensuring proper installation will reduce...
  view full answer...
• Recommended Regulator Replacement For A Marshall 605h Model 290-01F
  The Marshall 605h Model 290-01F regulator you have is horizontal so the correct replacement is the Camco Horizontal 2-Stage Propane Regulator - 160,000 Btu/Hr Item # CAM59323. You'll want to place the vent down to prevent rain, ice, snow, and other debris from getting into the regulator.
  view full answer...
  
• Recommended Propane Tank Gauge and Regulator for 100 lb Tank Connection to Generator
  For your 100 lb propane tank, I recommend the Camco Propane Cylinder Gas Gauge and Leak Detector # CAM59023 and then the Camco Horizontal 2-Stage Propane Regulator - 160,000 Btu/Hr # CAM59323. If you want a second tank connected to automatically changeover, then I recommend the MB Sturgis High Capacity Two-Stage Auto Changeover Regulator # 888001-MBS.
  view full answer...
• Replacement Horizontal Marshall 260 Propane Regulator
  Yes, the part # CAM59333 will work as a replacement for your Marshall 260 LP regulator. Keep in mind that it does have the P.O.L. connector included. If you do not need the P.O.L. connector then you will want to go with the Camco Horizontal 2-Stage Propane Regulator # CAM59323.
  view full answer...
• Replacement For 290 01 J Propane Regulator
  To replace your 290 01 J propane regulator you can use the following from Camco: - Camco Horizontal 2-Stage Propane Regulator - 160,000 Btu/Hr # CAM59323
  view full answer...
• Will Camco 2-Stage Regulator CAM59323 Fit in Place of a Cavagna 524AS Regulator
  Though the design is slightly different you can use the Camco Horizontal 2-Stage Propane Regulator # CAM59323 in place of the Cavagna Model 524AS 2-stage regulator. I have linked a video review of this regulator for you.
  view full answer...
• Replacement Regulator Recommendation for Marshall Brass 260 Regulator
  Your Marshall brass regulator 260 can easily be replaced with a Camco 2 Stage regulator part # CAM59323. Your current regulator is basically just a standard style dual stage regulator like this.
  view full answer...
• Propane Regulator Compatible with Tankless Water Heater 157,000 BTU
  You can use a propane tank for the BTUs needed and simply use the appropriate fittings and regulator. For the regulator, I recommend the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr # CAM59333 you referenced which has an 11 inch water column. If you don't have the POL fitting, then I recommend the Camco Vertical 2-Stage Propane Regulator - 160,000 Btu/Hr # CAM59313 or the horizontal 2-Stage # CAM59323 which can use the MB Sturgis Propane Pigtail - Type 1 x 1/4"...
  view full answer...
• Do I Need a Separate Low Pressure Regulator for a Camco Olympian Wave Heater
  Yes, you will need to use a low pressure regulator with the Camco Olympian Wave 8 part # CAM57351 but that is what the Camco Horizontal 2-Stage Propane Regulator part # CAM59323 is. Therefore, if you have the heater tied in after the above regulator then you won't have any issues. In order to attach the Camco Olympian Wave 8 to the manifold on your trailer you are most likely going to need the MB Sturgis High Pressure Propane Hose part # 100383-36-MBS for 3' long, part # 100040-72-MBS...
  view full answer...
• Troubleshooting Connection Between A 2-Stage Regular And 20lb Propane Tank
  Typically most 2-stage regulators like the # CAM59323 will have a 1/4" NPT inlet connection which would allow you to connect a POL fitting like # 37207-30085 to connect to the inner threads of the 20lb tank. If this is what you have and you're still having issues with the threads not gripping it could be that the threads on either the tank or the fitting are stripped. You can combat this by taking off the POL fitting and using a type-1 fitting like the # CAM59923 which will thread into...
  view full answer...
• Recommended Replacement For A Marshall 230 2-Stage LP Gas Regulator
  The Marshall 230 LP regulator is showing up as a vertical design so you would be able to use the Camco Vertical 2-Stage Propane Regulator - 160,000 Btu/Hr # CAM59313 as a replacement. If you have a horizontal design you can use the Camco Horizontal 2-Stage Propane Regulator - 160,000 Btu/Hr # CAM59323.
  view full answer...
• Regulator and Hose for a Pair of 110,000 BTU Deep Fryers on Food Truck
  What you will need is a 2-stage regulator, either the Vertical 2-Stage Propane Regulator # CAM59313 or the Horizontal 2-Stage Propane Regulator # CAM59323. For hoses you will need a 3/8" MPT to attach to the regulators and since you mentioned 1/2" the 3' Propane Hose Assembly # 100383-36-MBS comes with a 1/2" female flare swivel on the other end. Hose Assembly # 100383-48-MBS is the same thing but 1' longer. Should you need a 3/8" female flare swivel the correct hose assembly is # 100040-48-MBS. I've...
  view full answer...
• Replacement for Marshall 210 Model Gas Regulator
  The correct replacement we have for your Marshall 210 Model Gas Regulator is the Camco Single Stage Propane Regulator part # CAM59013. The inlet on this regulator uses a 1/4" female NPT connector and the outlet uses a 3/8" female NPT connector, there may or may not be adapters needed.
  view full answer...
  
• Are Hard Nose and Soft Nose POL Propane Cylinder Adapters Interchangeable
  Yes, you can use hard and soft nose POL propane cylinder adapters interchangeably unless otherwise specified by the manufacturer of the product you are using it on. The difference is that with a hard nose you would have to use a wrench to tighten it. A soft nose has a handwheel used to tighten and an o-ring to make a seal.
  view full answer...
• Recommended LP Regulator For A Propane Fire Pit/Table Top Heater
  If your propane fire pit/table top heater already has a regulator you won't want to have a second regulator on the line. If there is no regulator it really just depends on the connections to the tank and the fire pit/table top heater. The easiest would be to use a hose like the # CAM57629 or # CAM57703 that come with regulators on them and attaching them to a propane bottle. If you're pulling from an RV's onboard propane tank you could install a regulator like the Camco Horizontal 2-Stage...
  view full answer...
• Will Camco Vertical 2-Stage Propane Regulator Replace Marshall 260 Regulator
  I spoke with my contact at Camco and she said you will want Camco Vertical 2-Stage Propane Regulator # CAM59313. This propane regulator maintains a constant 11" w.c. gas pressure for your camper. The 2 Stages ensure a smooth, consistent flow. The inlet connector is 1/4" NPT and outlet connector is 3/8" NPT. It will mount to your camper vertically.
  view full answer...
• 100 lb Cylinder Set-Up To Heat Trailer In Winter
  It shouldn't be a problem to hook up a 100 lb cylinder to your trailer while it is stored for the winter. As long as you have the correct fittings, you'd just need to disconnect your dual tanks from the trailer's propane line and close them, and make sure your 100 lb cylinder is connected to your trailer's propane line with a dual-stage regulator and a POL hose. It's likely that the pigtails you already have with your smaller dual cylinders won't work with the 100 lb cylinder, so you need...
  view full answer...
• Supplying Propane to a 150,000 BTU Commercial Deep Fryer
  For starters, we carry propane accessories for camping equipment and small appliances, not commercial duty deep fryers so we may not have the exact fittings/advice you need. However, I can give fittings/advice based on my experience with the above. If the deep fryer you are using has a built-in regulator then an additional one at the tank would only cause problems because it further reduces the water columns to a point that the deep fryer would not be able to function. Therefore, I don't...
  view full answer...
  
• Do Propane Regulators have Built in Check Valves
  We have pigtails like the MB Sturgis part # 100473-30-MBS which have check valves built into them to prevent propane from filling the second tank but the regulators like the # CAM59323 that you referenced do no have this built in.
  view full answer...
• Regulator Similar to Camco CAM59323 with Good Reviews
  There are a couple reviews of the Camco regulator part # CAM59323 that you referenced that indicate the regulator failed after a few months/less than a year. For as many as we've sold I would not anticipate that being the case for you or anyone else but for a similar regulator that doesn't have any failures mentioned in the reviews the MB Sturgis part # 108221 would be a great option. This is also a dual stage, horizontal regulator.
  view full answer...

Do you have a question about this Propane Fitting?