Do I Need a Separate Low Pressure Regulator for a Camco Olympian Wave Heater

Updated 05/28/2019 | Published 05/26/2019

Products Featured in This Question

Camco Horizontal 2-Stage Propane Regulator - 160,000 Btu/Hr

(105)

$53.18

MB Sturgis Propane Hose - 3/8" Male NPT x 3/8" Female Flare Swivel - 12'

(446)

$33.91

MB Sturgis Propane Hose - 3/8" Male NPT x 3/8" Female Flare Swivel - 6'

(446)

$32.58

MB Sturgis Propane Hose - 3/8" Male NPT x 1/2" Female Flare Swivel - 3'

(446)

$21.82

Camco Olympian Wave 8 Catalytic Safety Heater for Large RVs

(66)

$577.92

Question:

I purchased a wave 8 awhile back and ready to install in rv with camco 2 stage tied in with oven,but have read that I may need a low pressure regulator for wave 8 witch will most likely hook up to one of two propane bottles. Will this 2 stage work in conjunction with both units? Thank you for your thoughts!

asked by: Mark

Expert Reply:

Yes, you will need to use a low pressure regulator with the Camco Olympian Wave 8 part # CAM57351 but that is what the Camco Horizontal 2-Stage Propane Regulator part # CAM59323 is. Therefore, if you have the heater tied in after the above regulator then you won't have any issues.

In order to attach the Camco Olympian Wave 8 to the manifold on your trailer you are most likely going to need the MB Sturgis High Pressure Propane Hose part # 100383-36-MBS for 3' long, part # 100040-72-MBS for 6' long, or part # 100040-144-MBS for 12' long.

expert reply by: Conner L