Hey Derek, thanks for the picture! The SeaSucker Universal Recovery Board Mount - Vacuum Mount item #SEA39XR is going to work great on your setup. These will have no problem attaching to the aluminum sides. It's not going to delaminate the…
Hey Eric, welcome back and good morning to you as well. We have the Replacement Crossbar Mounting Clamps and Feet for Thule Rod Vault Fishing Rod Carriers - Qty 2 item #TH83NH, you referenced. Thule does not offer or list a replacement bolt for their…
When trying to choose the right NOCO Boost Jump Starter to use for both your trucks, the easiest route is to go by the actual engine size. For example the NOCO #329-GB70 is good for up to 8.0L gas engines and 6.0L diesel engines, while the…
The etrailer Horizontal E-Tracks like part #e42VR are a great option for securing vehicles especially when combined with the Erickson E-Chock Wheel Chocks part #EM09162-2 and Erickson E-Track Strap with Ratchet part #EM59136. I don't really have…
We don't have a floor length backing plate for the e-tracks. To do a flush mounted setup you could put a sub-floor in the trailer attach the e-track to that and then install the floor between the e-tracks to give it a flush type setup. With that…
We do carry some of the replacement hardware for the Thule Ski Carrier Adapter TH987XT (discontinued). Unfortunately they are not in a kit together and we do not have every part, but I will list all of the parts and part numbers that you will need…
I have included a picture that shows the measurements needed for a spindle, bearings, seals, faces, and hubs. The spindle measurements are labeled A through F. A is the spindle shaft diameter B is where the grease seal sits C is where the inner…
Hey Trent, I have a couple options for your 2025 Subaru Forester with tire size 235/50-19. First we do have tire cables like your manual mentions can be used with the part #PW1042. These will work and get you around but they are generally a…
I did a little research on your 2019 Audi SQ5 and it looks like you have P255/45R20 tires. The best chains for your limited clearance are the Titan Chain Diagonal Alloy Cable Snow Tire Chains #TC735DC. These cable chains require a minimum of 1.46…
We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…
I have a clevis hook that may work with your 5,000 lb trailer. Take a look at part #6495-401-04. This hook has a working load limit up to 5,400 lbs and the pin that connects through the chain is 7/16 of an inch in diameter. We have heavy-duty clevis…
The Thule Roof Mounted Top Rack System - 60" Long #THTB60 is the same as the TB60 on Thule's web site. The system does come complete with all the hardware needed to mount to your Leer fiberglass topper including the drill bit. This system is…
Hey Derek, thanks for the picture! The SeaSucker Universal Recovery Board Mount - Vacuum Mount item #SEA39XR is going to work great on your setup. These will have no problem attaching to the aluminum sides. It's not going to delaminate the…
Hey Eric, welcome back and good morning to you as well. We have the Replacement Crossbar Mounting Clamps and Feet for Thule Rod Vault Fishing Rod Carriers - Qty 2 item #TH83NH, you referenced. Thule does not offer or list a replacement bolt for their…
When trying to choose the right NOCO Boost Jump Starter to use for both your trucks, the easiest route is to go by the actual engine size. For example the NOCO #329-GB70 is good for up to 8.0L gas engines and 6.0L diesel engines, while the…
The etrailer Horizontal E-Tracks like part #e42VR are a great option for securing vehicles especially when combined with the Erickson E-Chock Wheel Chocks part #EM09162-2 and Erickson E-Track Strap with Ratchet part #EM59136. I don't really have…
We don't have a floor length backing plate for the e-tracks. To do a flush mounted setup you could put a sub-floor in the trailer attach the e-track to that and then install the floor between the e-tracks to give it a flush type setup. With that…
We do carry some of the replacement hardware for the Thule Ski Carrier Adapter TH987XT (discontinued). Unfortunately they are not in a kit together and we do not have every part, but I will list all of the parts and part numbers that you will need…
I have included a picture that shows the measurements needed for a spindle, bearings, seals, faces, and hubs. The spindle measurements are labeled A through F. A is the spindle shaft diameter B is where the grease seal sits C is where the inner…
Hey Trent, I have a couple options for your 2025 Subaru Forester with tire size 235/50-19. First we do have tire cables like your manual mentions can be used with the part #PW1042. These will work and get you around but they are generally a…
I did a little research on your 2019 Audi SQ5 and it looks like you have P255/45R20 tires. The best chains for your limited clearance are the Titan Chain Diagonal Alloy Cable Snow Tire Chains #TC735DC. These cable chains require a minimum of 1.46…
We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…
I have a clevis hook that may work with your 5,000 lb trailer. Take a look at part #6495-401-04. This hook has a working load limit up to 5,400 lbs and the pin that connects through the chain is 7/16 of an inch in diameter. We have heavy-duty clevis…
The Thule Roof Mounted Top Rack System - 60" Long #THTB60 is the same as the TB60 on Thule's web site. The system does come complete with all the hardware needed to mount to your Leer fiberglass topper including the drill bit. This system is…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Traction boards are essential for off-road enthusiasts and adventurers. Whether you're navigating muddy paths, sandy dunes, or icy roads, these boards provide the grip needed to get your vehicle unstuck. They're versatile, durable, and a must-have for anyone who loves exploring the great outdoors.
Traction boards excel in various terrains like mud, sand, and snow. They act like little ladders for your tires, providing the grip needed to get unstuck. They're especially handy in wet, muddy paths or compacted ice and snow, making them a versatile tool for any off-road adventure.
Absolutely! Some creative uses include bending them into snowshoes or using them to raise a vehicle for maintenance. Their sturdy construction and perforations make them adaptable for various off-label uses, adding value beyond just vehicle recovery.
Look for boards with a durable, heavy-duty construction and a design that allows easy placement under tires. Consider the board's size to ensure it fits your vehicle and storage space. A good set complements other recovery tools like tow straps and jacks.
Traction boards offer a more reliable and reusable solution compared to makeshift aids like cardboard or carpet. They're designed specifically for vehicle recovery, providing consistent performance and durability, making them a superior choice for serious off-roaders.
Yes, traction boards are designed to be compact and easy to store. They can fit in a truck toolbox or the back of a vehicle, ready for use whenever needed. Their portability ensures they're always on hand for unexpected situations.
Filters
