Sure, I can help with that. I can see why the fitment notes are confusing. For a 2012 Toyota Tundra with the factory tow package and factory 7 way connector, you'll want a brake controller that plugs into the factory brake controller port under…
Based on my research your 2017 Airstream Basecamp travel trailer has a 4,000 lb Dexter Torflex axle; for that axle the correct lift kit is the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-707-01. This lift kit is a fit for a #10 Torflex…
In regards to the Titan Chain Screw Pin D-Shackle part #TCS10MM, the distance from the pin to the inside edge opposite of this is going to be around 2". I spoke with Titan and they informed me that the working load limit (WLL) is 880 lbs.
Thanks for the question, Chris! The Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT66GR is confirmed to fit all models of the 2022 Ford Explorer so it will definitely fit the ST-Line you're asking about. If you'll be doing any towing be…
Hey James, for the Yakima HD Overhaul rack the replacement bottom infill is the part #Y01166-LC and the top is part #Y01166. The bottom and top channels of the bars are the exact same dimensions and profile so they are interchangeable.
Hey Mike! Yes, you can run a dedicated AC-powered battery charger alongside the WFCO Auto Detect Converter #WF35AD. As long as both chargers are configured for the same battery chemistry, they'll work together without any issues. I recommend…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…
Yes, your RSI SmartCap load bars are compatible with, and will allow you to mount the Hullavator, which is the following part number: - Thule Hullavator Pro Kayak Carrier and Lift Assist #TH898 I have added a link below to a video review for you to…
There is not a general restriction from Thule that says two Hullavator Kayak Carriers #TH898 can't be used on a Thule roof rack. As long as the crossbars on your Ford Escape have the required length for two sets and a sufficient weight capacity…
Since we don't currently offer the RSI Smartcap I don't have any real technical info on it, but since you say they have t-slots you could use a system like the Rhino-Rack Roof Rack for Thule and Yakima Tracks #Y01-140B-NT. This rack attaches…
Hi Toby, At this time, Coleman Mach has not announced a heat pump version of the Mach Everest RV Air Conditioner #CM63MR. The current Mach Everest is marketed as a cooling-only, variable-speed air conditioner, and I have not seen any official…
Sure, I can help with that. I can see why the fitment notes are confusing. For a 2012 Toyota Tundra with the factory tow package and factory 7 way connector, you'll want a brake controller that plugs into the factory brake controller port under…
Based on my research your 2017 Airstream Basecamp travel trailer has a 4,000 lb Dexter Torflex axle; for that axle the correct lift kit is the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-707-01. This lift kit is a fit for a #10 Torflex…
In regards to the Titan Chain Screw Pin D-Shackle part #TCS10MM, the distance from the pin to the inside edge opposite of this is going to be around 2". I spoke with Titan and they informed me that the working load limit (WLL) is 880 lbs.
Thanks for the question, Chris! The Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT66GR is confirmed to fit all models of the 2022 Ford Explorer so it will definitely fit the ST-Line you're asking about. If you'll be doing any towing be…
Hey James, for the Yakima HD Overhaul rack the replacement bottom infill is the part #Y01166-LC and the top is part #Y01166. The bottom and top channels of the bars are the exact same dimensions and profile so they are interchangeable.
Hey Mike! Yes, you can run a dedicated AC-powered battery charger alongside the WFCO Auto Detect Converter #WF35AD. As long as both chargers are configured for the same battery chemistry, they'll work together without any issues. I recommend…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…
Yes, your RSI SmartCap load bars are compatible with, and will allow you to mount the Hullavator, which is the following part number: - Thule Hullavator Pro Kayak Carrier and Lift Assist #TH898 I have added a link below to a video review for you to…
There is not a general restriction from Thule that says two Hullavator Kayak Carriers #TH898 can't be used on a Thule roof rack. As long as the crossbars on your Ford Escape have the required length for two sets and a sufficient weight capacity…
Since we don't currently offer the RSI Smartcap I don't have any real technical info on it, but since you say they have t-slots you could use a system like the Rhino-Rack Roof Rack for Thule and Yakima Tracks #Y01-140B-NT. This rack attaches…
Hi Toby, At this time, Coleman Mach has not announced a heat pump version of the Mach Everest RV Air Conditioner #CM63MR. The current Mach Everest is marketed as a cooling-only, variable-speed air conditioner, and I have not seen any official…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Built for straightforward hookups, tow shackles in shackle only keep your setup simple and versatile. Use them with recovery ropes, winch lines, hitch loops, or safety chains; soft options are easier to carry and use than hard shackles. Match pin size and opening to your connection points, mount bolt-on styles to a frame-mounted tow or recovery point, and confirm WLL vs break strength since ratios can vary.
Yes, a shackle can bridge between your hitch loops and chains. Match the pin diameter and inside width to your chain and hook sizes so everything seats correctly. Confirm the shackle's capacity exceeds your loaded trailer weight. Attach only to solid hitch loops or frame-mounted points for a secure connection.
Go by the listed safe working limit and maximum break strength on the shackle. Don't assume a fixed ratio—follow the exact numbers provided. Choose a WLL that covers your expected loads for winching, snatch straps, or chain hookups. If you're pulling heavier rigs or deep mud recoveries, step up to higher-rated gear for margin.
Open the loop, push the knot through, and fully seat it before loading—new rope can feel snug. Once engaged it holds securely and releases cleanly after tension. Inspect the protective sleeve and rope for chafe, and use dampers when winching or snatching. Avoid sharp edges and ensure your recovery points are suitable.
Both work, but soft shackles shine for quick, easy hookups and reducing metal in the system. They're easier to carry and use and many off-road clubs require synthetic. When a sturdy, rigid connection is needed, a metal D-shackle is a solid choice. Check your recovery points and straps for compatibility and use appropriate dampers to help manage recoil.