Hello Desiree, thanks for reaching out. We have just the thing! For your 2023 Chevy 2500 High Country Diesel I recommend the following: - Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F64XV This…
Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hey Phil! For a tandem axle trailer you will want two of the Leveling Kit with Wheel Chocks for Trailers and RVs #WS28ER. You are correct, one under each tire is best. I use these on my Jayco with one under each tire to keep them off the ground and…
Hey Derek, thanks for the picture! The SeaSucker Universal Recovery Board Mount - Vacuum Mount item #SEA39XR is going to work great on your setup. These will have no problem attaching to the aluminum sides. It's not going to delaminate the…
First we need to find out if the problem is your tow vehicle wiring or your trailer wiring. To do this use a circuit tester like part #PTW2993 to test all of the pins on your 7-way for the correct function compared to the diagram I attached. Next use…
Yes, the Blue Ox Hitch Receiver Immobilizer II #BX88224 that you referenced can be used while towing a small trailer as long as the hitch on the vehicle has a 2 inch opening. We have confirmed with Blue Ox that you can use this product in towing…
The Buyers Products 24" Fluorescent Orange Marker Kit #3371308103 are a hollow Nylon construction. They are pretty rigid/sturdy and are designed to be used on vehicles.
You could for sure. You would however want to make sure that the fender is reinforced enough to support the Markers #3371308103 so that they don't just rip the metal or plastic of the fender. I'd get some flat metal from a local home…
You'll need to remove the ring terminal screws that hold the white wires of the #8880162 to the trailer but then the other connections simply plug into the female matching end on the trailer since it uses bullet connectors.
You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…
Grab dependable traction when tires spin in mud, sand, snow, or even on ice. The 7 inch wide design is easy to stash yet gives you a solid runway for recovery when you need it. Use these for getting unstuck, not for vehicle leveling.
Yes, they store compactly. Look for designs that fold or stack to fit in tight spaces. Check your available cargo room and keep them accessible so you can grab them quickly in an emergency.
No, folded traction mats aren't designed for leveling. They're built for recovering vehicles from mud, sand, and snow. The hinges are meant to collapse for storage, not to support weight. If you need to level, use products made for leveling and load support.
They don't work well for campers in that role. They're intended for vehicle recovery, not as support pads. For soft ground, use larger footplates under stabilizer jacks to distribute weight and help reduce sinkage.
Yes, they're designed for recovering vehicles from mud, sand, and snow, and they've worked on ice. Place them under the drive wheels to gain grip. Clear loose debris and align them straight to help the tires climb onto the mats.
Filters
