Product Experts Available Now!
Call 1-800-940-8924
Square Direct Weld Trailer Jack w/ Footplate - Drop Leg - Sidewind - 15-3/8" Lift - 7,000 lbs
(262 reviews)
Price: $111.88
We'll connect you with nearby partnered installers who know this exact setup.
Square Direct Weld Trailer Jack w/ Footplate - Drop Leg - Sidewind - 15-3/8" Lift - 7,000 lbs
$111.88
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (262)
- Q & A (0)
- Photos
etrailer Trailer Jack
Highlights
- 7,000-Lb Lift Strength: Raises and supports heavy trailers with 7,000-lb lift and 8,000-lb support capacity.
- Long Reach Range: 28-7/8" total adjustment with 15-3/8" lift and 13-1/2" drop leg adjustment for fast height changes.
- Solid Ground Grip: 7-7/8" x 6" welded footplate spreads weight to reduce sinking on soft surfaces.
- Built for Tough Loads: Square 2-1/2" outer tube resists side-load flex better than round-tube jacks.
- All-Weather Protection: Black painted outer tube and zinc-finished inner tube and footplate fight corrosion.
- Grease-Ready Design: Built-in grease zerk makes maintenance simple for smoother cranking and longer life.
Features to know about
Faster Setups: Drop Leg Adds 13-1/2" of Quick Adjustment
Getting hitched or unhitched doesn’t need to be an arm workout. This jack gives you 15-3/8" of lift and another 13-1/2" with the drop leg, so you can raise or lower heavy trailers fast without stacking wood or blocks. A simple pin and clip hold the leg where you want it, saving time and effort every time you hook up.
Solid Support: Square Tube Design Handles 7,000 lbs with Ease
Side-load stress is no problem here. The square construction gives this weld-on jack more side-load support than round-tube jacks, keeping things stable even on uneven ground. It’s rated for a 7,000 lb lift and 8,000 lb support capacity, so you can count on it to hold steady under real working conditions.
Built Tough: Zinc and Black Coating Fight Off Corrosion
Road grime, salt, and rain won’t eat this thing alive. The outer tube is painted black, while the inner tube and footplate have a zinc finish to hold off rust. The welded-on rectangular footplate measures 7-7/8" long by 6" wide and helps keep the jack from sinking into soft ground.
Easy Operation: Smooth Sidewind Handle and Grease Zerk
Cranking is smooth and steady thanks to the sidewind handle and quality gearing. A built-in grease zerk makes it easy to keep the internals lubricated for long life. The handle has a zinc finish for rust resistance and a 7-3/4" radius for comfortable leverage when lifting or lowering heavy loads.
Simple, Secure Fit: Weld-On Mount for Permanent Strength
Once it’s welded in place, this jack becomes part of the trailer frame. The 2-1/2" outer tube and 2-1/4" inner tube fit flush and weld cleanly, giving you a tight, permanent mount that doesn’t shift or loosen over time. It’s a straightforward, durable solution that keeps your setup ready to work.
Specs
Height and Lift
- Height (from bottom of foot to top of jack): 24-3/4" Retracted
- Height (from bottom of foot to top of jack): 40-1/8" Extended
- Total adjustment: 28-7/8"
- Lift: 15-3/8"
- Drop leg adjustment: 13-1/2"
Weight and Capacity
- Lift capacity: 7,000 lbs
- Support capacity: 8,000 lbs
Dimensions
- Outer tube width: 2-1/2"
- Inner tube width: 2-1/4"
- Footplate dimensions: 7-7/8" long x 6" wide
- Handle radius: 7-3/4"
- Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole
- Spacing between center of hole on bottom and center of nearest hole: 3-1/2"
Warranty
- Warranty: 1-Year warranty
TJD-7000S Ram Square Direct Weld Jack w/ Footplate - Drop Leg - Side Wind - 15-3/8" Screw Travel - 7,000 lbs
Compare to Pro Series PS1400850383
Item # TJD-7000S
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Did not arrive in time
Ratings & Reviews
4.7
262 reviews
by:
Dan
07/26/2025
The product is excellent quality, and is being welded onto my dump trailer as we speak. However……the box that it was shipped in was not adequate for the weight and shape of the jack and it was escaping from both ends of the box. Might suggest a zip on the handle to keep it in place during handling.
by:
Charlie
06/08/2026
Heavy duty jack at a great price.Awesome transition and delivery!
by:
Dane
09/11/2025
I bought the Square Direct Weld Sidewind Jack w Footplate Trailer Jack for a used trailer I acquired, welded it on and have used it with out any problems. The footplate option is great for getting the jack up high enough to clear things when backing and driving over uneven ground.I would buy it again if ever needed.
by:
Dan
06/01/2018
7000 lb trailer jack with grease fitting is smoother than I expected. Great Value. Easy on line order and great shipping. Thanks for the attention to my order
by:
Mario
11/25/2025
the side winder jacks we purchased work very well, good pricing and sturdy.it also arrived on time as promised and we are quite pleased! thank you
by:
Debbie
07/02/2026
Fast delivery
by:
David
12/04/2025
I'm sorry I didn't replace this sooner! Works 100% better than my old jack, easy install. I would definitely buy again.
Gwendolyn Y.
12/4/2025
Hey at least you finally did replace your jack! Better late then never I say.
by:
REX
07/16/2025
Well it's been a year and still working perfectly, keep them greased up and should last a long time. This is my second purchase of this, have them on both of my trailers. Thanks for a great product Etralier
by:
Robert
08/25/2017
This product is great! I bought it to repair a 2.5 x 20 inch bulldog jack that I bent. The insides fit like a glove. Even the gear mechanisms were the same.
Robert
8/25/2018
I use the product frequently and it works as expected. It seems quite durable and strong. I use it on an 18’ gooseneck trailer when I go logging.
by:
John j kasl
11/20/2017
this is what we needed to finish our small dump trailer. now if we find the time it would be great. really wish the drop leg jack was the one with foot pedal, but oh well. shipping was very fast. thank-you
by:
Rick
10/29/2025
arrived quickly and exactly as described.
by:
VH Enterprises
12/07/2016
received my product in a timely manner and happy with it at first appearance . WIll take now and have it welded to trailer.
Mark V.
12/7/2017
its worked great on our dump trailer over the past year , great product..
by:
JD
11/07/2022
handle was slightly damaged in shipping, was shipped with multiple other heavy items and the box didn't hold up very well. Jack still works, drop leg saves on a lot of cranking.
by:
Steve S
01/14/2017
I have not had a chance to use the products I ordered, however, I would like to comment on e-trailer's customer service.
It is outstanding!
I asked for a dimension that was not specified in any literature I could find.
So as a last ditch effort and without expecting much of a response, I sent the question.
Not only did George J send me an answer, he went to the warehouse, found one of the items, took an exact measurement, and created a page with a picture-diagram showing where the measurement was taken and the measurement and sent me the link.
I am seriously impressed.
Thank you George!
I don't generally see customer service like this anymore and it was sincerely appreciated.
I will look to e-trailers for all my needs of this type.
Thank you! Rating : ????????????
It is outstanding!
I asked for a dimension that was not specified in any literature I could find.
So as a last ditch effort and without expecting much of a response, I sent the question.
Not only did George J send me an answer, he went to the warehouse, found one of the items, took an exact measurement, and created a page with a picture-diagram showing where the measurement was taken and the measurement and sent me the link.
I am seriously impressed.
Thank you George!
I don't generally see customer service like this anymore and it was sincerely appreciated.
I will look to e-trailers for all my needs of this type.
Thank you! Rating : ????????????
by:
Larry Harvey
01/27/2017
I ordered these items for my DIY project, turning my bumper pull trailer into a goosenech trailer. The parts are of good quality and the delivery was quick. I would highly recommend for anyone who needs something for a DIY project to order from ETRAILER.COM
I went from that to this.
I went from that to this.
by:
Timbo
07/29/2022
Perfect fit, exactly what I wanted. A lot of it had to do with my machine shop guy cutting the old one off and found superb work on welding back the new one, but it is hard to tell that there was a change from the original. 18 foot flatbed, double-axle, 4 ton capacity.
by:
Jane
02/15/2020
This is the second trailer jack I have ordered from you. Excellent service and fair pricing.
Thank you.
Thank you.
by:
Dorman
12/12/2023
Great product and a Great company. There shipping is the best around.
by:
Tim
01/24/2023
Jack was dented in shipping.It works fine so I just used it.
by:
David
05/16/2025
Works great even better than original. Wished I replaced it years ago ago!
by:
Russell
07/22/2020
I've ordered several items from ETRAILER. All items are shipped very quickly and quality has always met my expectations.
I will continue to use them as my trailer parts supplier.
I will continue to use them as my trailer parts supplier.
by:
M
06/17/2021
This thing is solid. The old landing gear was terrible. Huge improvement.
by:
Josh H
12/25/2016
Fast shipping, Jacks work flawless thank you for the great product at a reasonable price!
by:
John
02/11/2024
Just exactly what I was looking for excellent customer service it very quick delivery. Thank you Bay For your excellent customer service
by:
Rick F.
03/27/2017
Trailer jack very heavy duty construction. Shipped quickly.
25
262
true
Show More Reviews
See what our Experts say about this etrailer Trailer Jack
- Replacement Parts Available for the RAM Trailer Jack Part # TJD-7000SI do have several replacement parts available for the RAM Trailer Jack part # TJD-7000S but not an all inclusive rebuild kit. Instead you will need to select from the components listed below and repair the jack as needed. The most common fault on the above trailer jack is the spider gears and in order to replace them you will want to use part # TJD-7000S-GR. The rest of the replacement parts we have for the jack are listed below. If you can identify what is not working on the jack I would...
view full answer... - What is Difference Between etrailer # TJD-8000S and # TJD-7000S Trailer JacksThe big difference is the orientation of the foot plate on both jacks. One just has the rectangular shaped foot plate rotated 90 degrees from the other. Aside from that they both have the same capacities and travel.
view full answer... - Trailer Jack Solution for Trailer Tongue that is 6 inch by 3 inchThat is a pretty tall trailer frame but we do have a solution Dan. You could use the part # HD50000101 unless you wanted a swivel option. Then I would go with a weld on style jack like the etrailer # TJD-7000S for a sidewind or the part # TJD-8000 for a top wind. Or if you wanted something that could swivel you'd want a pipe mount like the part # BD178203.
view full answer... - Recommended Keeper Pins for RAM 7000 and 5000 Series JacksHey Kelly, I went ahead and checked out all of those jacks and I believe I was able to find what you're looking for. So, for # TJDP-7000-B, # TJD-7000, # TJD-7000S, and # TJDP-7000S-B, you can use the Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks # TJD-7000-PN; and for # TJD-5000 and # TJD-5000S you can use the Replacement Pull Pin for etrailer and Ram Pipe Mount Swivel Jacks # TJP-PN58.
view full answer... - Recommended Bolt On 7,000 lbs Capacity Square Jack Welcome back Jordan! I have an alternative for you but we do not have any Ram 7k jacks that can be bolted on. Just welded like item # TJD-7000S and pipe mount like item # TJDP-7000S-B options. For a 7,000 lbs capacity square jack that can be bolted on, I recommend the Patriot Hitches Square Trailer Jack item # PH66NR. This is a sidewind jack with a total lift ability of 28". It comes with a mounting bracket and hardware to secure the jack to the trailer's frame. The bracket included...
view full answer... - Is There A Fulton Stabilizer Jack With Mounting Channel With A Higher Capacity?Hey Paul, The Fulton Drop-Leg Stabilizer Jack # FSJ1-SJ2 with the 3,000lb capacity is the largest we have in that style. We do have other Fulton jacks like # TJD-7000S that are the 5,000-7,000lb range, weld on as well, but a different style than what you were looking at. What kind of trailer are you wanting to put this on?
view full answer... - Solution for Ram 8000 Series Trailer Jack that Won't Crank Up or DownSounds like you need a gear kit to fix your Ram 8000 series trailer jack as yours are damaged. For that we have the # TJD-7000S-GR. When the Ram 8000 jack has the issue you described it is due to damaged gears which is what this kit fixes.
view full answer... - Gear Kit for Ram 8000 Series Trailer JackThe 8000 Series jack is # TJD-7000S. The replacement gear kit is # TJD-7000S-GR. If you'd like to verify you can measure the gears on your jack. The small gear is 1.331 inches for the outer diameter and 0.505 inches for the inner. Then the large gear is 1.703 inches outer and 0.595 inches inner./
view full answer...
- Recommended Replacement Handle and Pin for a RAM 8000 Series JackFor your RAM 8000 Series jack # TJD-7000S, you can use the Replacement Sidewind Handle for etrailer and Ram Square, Direct Weld Jacks # TJD-7000S-HD for a replacement handle and handle pin. If by pin you were actually referring to the footplate keeper pin, then you'd need the Replacement Footplate Keeper Pin for etrailer and Ram Square, Direct Weld Jacks # TJD-7000-PN as well.
view full answer... - Diameter Of Replacement Sidewind Handle for etrailer and Ram Square, Direct Weld JacksI went to the warehouse and took a measurement of the Sidewind Handle for etrailer and Ram Square, Direct Weld Jacks, part # TJD-7000S-HD. The handle diameter is 1/2-inch. I have attached a photo of the handle with the dimension shown you can check out.
view full answer...
- Using Weight Distribution Hitch on Trailer with Side-Frame-Mount JackIn order to use a weight distribution/sway control (WD/SC) system it is necessary to have room on the trailer A-frame to mount the spring bar lift brackets and the hitch on the tow vehicle must specifically be rated for use with WD/SC systems. The hitch safety sticker will indicate if it is indeed rated for use with WD. As for the jack, it sounds like you have a side-frame-mount jack like # FXPD15L or one of the similar jacks of this type shown on the linked page. Some of these, like...
view full answer... - Will Drop Leg from Ram 7000 Series Jack Fit a Ram 8000 Series JackIf you are talking about the drop leg # TJD-7000-FT then it could fit your 8000 series jack as long as all the measurements match up. This jack is 2 inches square and the distance from the center of one adjustment hole to the center of the next is 3-3/8 inches.
view full answer...
- Weld-on 7,000 Pound Trailer Jack with Weld Mount Already InstalledThe Square Direct Weld Jack # TJD-7000S does not include a mount and is designed to be welded directly to your trailer. For a similar jack the Square Pipe Mount Swivel Jack # TJDP-7000S-B installs using a weld-on pipe mount. It meets the same 7,000 pound capacity and has 15 inches of travel.
view full answer... - Is There a Replacement Screw and Nut for TJD-7000S Ram Sidewinder JackThe Square Direct Weld Jack w/ Footplate - Drop Leg - Sidewind - 28-7/8" Lift - 7,000 lbs # TJD-7000S does not have the replacement screw rod and nut assembly available as a replacement part. You will need to replace the entire jack. I recommend the Square Direct Weld Jack w/ Crank - Drop Leg w/ Spring Return - Sidewind - 25-3/4" Lift - 10K # TJD-12000SP-R2 which will have replacement parts should you ever need them. I've attached a video to assist.
view full answer...
- Weld On Pipe Mount for Trailer Jack # TJD-7000S to Fit 2 inch Male FittingFor a 2 inch pipe mount to fit over a 2 inch male pipe on your trailer you could weld the part # BD015271 to the jack part # TJD-7000S.
view full answer... - Can Landing Gear be Used on Gooseneck TrailerI don't see any reason why your gooseneck trailer can't use the Landing Gear Set # RVLG-8HDL. Then for rear jacks you can weld onto the frame, a sidewind jack would seem to be the best option, the Square Direct Weld Jack w/ Footplate - Drop Leg - Sidewind - 28-7/8" Lift - 7,000 lbs # TJD-7000S.
view full answer... - Does Replacement Bearing for etrailer JackThe Replacement Bearing for etrailer and Ram Square Jacks - 7,000 lbs # TJD-7000-BR is 1/2 inch; it is does not have a weight capacity itself, but is designed specifically as a replacement for the following 7,000 lb etrailer and Ram jacks: - Square Direct Weld Jack with Footplate - Drop Leg - Topwind - 28-3/4" Lift - 7,000 lbs # TJD-7000 - Square Direct Weld Jack with Footplate - Drop Leg - Sidewind - 28-7/8" Lift - 7,000 lbs # TJD-7000S - Square Pipe Mount Swivel Jack with Footplate...
view full answer... - Replacement Crank Handle and Gear Kit For a Square Direct Weld Jack w/ Footplate # TJD-7000SWhen referencing the "crank" for the Square Direct Weld Jack w/ Footplate # TJD-7000S, if you mean the handle; the correct replacement is the Replacement Sidewind Handle # TJD-7000S-HD. If the jack is not cranking up or down, it is likely the gears. For that we have the Replacement Sidewind Gear Kit # TJD-7000S-GR.
view full answer... - Installation Instructions for Square Direct Weld Jack # TJD-7000SI am attaching a picture of the instructions for your application to the product page. The instructions say to put the jack in the proper location for your trailer application, then weld on both sides of the jack length using a 3/16 inch fillet weld.
view full answer...
- Rebuilding etrailer.com Square Direct Weld Jack # TJD-7000SWhile we don't have a complete parts diagram for your Square Direct Weld Jack # TJD-7000S available, we do have a thorough installation video for rebuilding the jack that you can use for reference. I have attached the video to this answer page. This will show you exactly where all the inner components install, including the washer that you mentioned.
view full answer... - Weld-On Square Trailer Jack with Rectangular Foot that Can Support 4,000 lbThe etrailer jack part # TJD-7000S that you referenced would be your best option. It's a square jack with a rectangular foot that has a drop leg, has a 7k capacity, and since it's a weld on it can be mounted at the height you are wanting and can use the drop leg feature to get the jack closer to the ground as needed. There isn't a similar jack that has a wheel instead of the foot as they can't be made with higher capacities than around 1,000 lbs or so.
view full answer... - Replacement Handle and Gears for the Square Direct Weld Jack w/ Footplate Part # TJD-7000SIf you are referring to the Square Direct Weld Jack w/ Footplate part # TJD-7000S then the correct replacement handle is the Replacement Sidewind Handle part # TJD-7000S-HD and the correct replacement gear kit is the Replacement Sidewind Gear Kit part # TJD-7000S-GR. If the above is not the jack you are referring to then please let me know the make and model and I will see if we have any replacements parts for this assuming it is a brand we carry.
view full answer... - Can The etrailer Square Direct Weld Trailer Jack TJD-7000 Fit A Flatbed Trailer With Dovetail Ramp?Welcome back, Eric! The etrailer Square Direct Weld Trailer Jack w/ Footplate - Drop Leg - Topwind - 15-1/4" Lift - 7,000 lbs # TJD-7000 can definitely be attached to a 31' flatbed with a dovetail ramp. It will of course need to be welded on, but as long as you have the space for it, that will not be a problem at all. That said, I think if I were doing this, the etrailer Square Direct Weld Trailer Jack w/ Footplate - Drop Leg - Sidewind - 15-3/8" Lift - 7,000 lbs # TJD-7000S would be...
view full answer... - Availability Of Replacement Gear Kit For Ram 2500 Series Side Mount Trailer JackI reached out to my contact at Ram and he was able to confirm that the correct replacement gear kit for your Ram 2500 Series Side Mount Trailer Jack is the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 5,000 or 7,000 lbs # TJD-7000S-GR. I included a video of the # TJD-7000S-GR for you to take a look at.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Updated by:
Lindsey S
Updated by:
Wilson B
Updated by:
Ronnie R
Updated by:
Hannah L
Updated by:
Mike S
Updated by:
Alex H
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Cole B
Written by:
Amanda M
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dan
7/27/2026
Great. Still working as well as day one.