Recommended Bolt On 7,000 lbs Capacity Square Jack
Updated 08/03/2026 | Published 08/01/2026
Products Featured in This Question
Question:
I am needing to know if you sell ram 7k leg jacks that have a bolt on bracket. Currently i only see weld on versions of this. The bolts would run parallel to the ground, so the plate would run up and down and the bolts go through the plate into the frame of the trailer
asked by: jordan t
Expert Reply:
Welcome back Jordan! I have an alternative for you but we do not have any Ram 7k jacks that can be bolted on. Just welded like item # TJD-7000S and pipe mount like item # TJDP-7000S-B options.
For a 7,000 lbs capacity square jack that can be bolted on, I recommend the Patriot Hitches Square Trailer Jack item # PH66NR. This is a sidewind jack with a total lift ability of 28". It comes with a mounting bracket and hardware to secure the jack to the trailer's frame.
The bracket included with the Patriot Hitches Square Trailer Jack item # PH66NR is pretty unique. It'll allow you to completely remove the jack and position it up and out of the way when you're using your trailer. I attached a couple of pictures below so you can see the jack being used and stored.
What kind of trailer is this for?
You can add this information, along with any other questions you have, where it says Add Comment.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Patriot Hitches Square Trailer Jack - Drop Leg - Sidewind - 15" Lift - 7,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Side-Mount Jacks
- Sidewind Jack
- 6001 - 7000 lbs
- Manual Jack
- 28 Inch Lift
- Bolt-On
- With Rectangle Foot
- Patriot Hitches
more information >
Continue Researching
- Search Results: trailer breakaway kit
- Search Results: 010~019~00
- Search Results: dexter trailer axles
- Shop: RV Designer Rectangular Incandescent License Light w/ Bracket - Back-Up with Reflex
- Shop: Buyers Products Trailer Tongue Toolbox - Black - 18 x 19 x 36
- Video: Breaking Down the Square Pipe Mount Swivel Jack w Footplate
- Video: etrailer 7 Way Upgrade Kit With Junction Box Installation
- Video: Complete Breakdown of the LED Combination Tail Light Kit for Trailers under 80" Wide
- Shop: Brake Controller
- Shop: RV Exterior Lighting
- Q&A: Can Patriot Hitches Square Trailer Jack with Reinforced Mount Attach to 6 inch Tall Frame
- Video: Let’s Check Out the Dexter Electric Trailer Brake Assembly
- Shop: Square Direct Weld Trailer Jack w/ Footplate - Drop Leg - Sidewind - 15-3/8" Lift - 7,000 lbs
- Shop: Patriot Hitches Square Trailer Jack - Drop Leg - Sidewind - 15" Lift - 7,000 lbs
- Shop: etrailer Ratchet Straps with Flat Hooks and Storage Bag - 2" x 20' - 3,333 lbs - Qty 2
- Shop: Jacketed ABS Trailer Cable Per Foot
- Shop: Bright Way Trailer Breakaway Kit with Charger, LED Tester, and 5 Ah Battery - Side Load
- Search Results: jack
- Search Results: ram jack
- Shop: Trailer Wiring
- Video: Breaking Down the Flint Hill Goods Connector Adapter
- Video: Buyers 7-way RV to 4 Flat Plastic Trailer Connector Adapter Review
- Q&A: Is There A 1.5" Hitch To 2" Hitch Adapter?
- Q&A: What are the Dimensions of the Mounting Bracket on the Patriot Hitches Square Trailer Jack?
- Q&A: Can PowerMax Wireless 50A RV Power Center and Distribution Panel be Used in Cargo Trailer
- Q&A: Replacement Drum Brake Actuator for a Atwood 85778
- Q&A: Replacement Brake Assemblies and Hub/Drum for Airstream with Nev-R-Lube Hub/Drums
- Q&A: What Is The Difference Between the 6K and 7K Dexter Axle Electric Brake Assemblies
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Practice Safe Trailer Towing with These 4 Tips
on Trailer Jack
Jordan T.
8/3/2026
It is for a sure trac enclosed trailer. That is a unique design however, due to cost, I am not able to bring that jack in. Thanks for the information and if you decide to stock the bolt on jack in the future, please let me know.