1. Accessories and Parts
  2. etrailer
  3. Trailer Jack
  4. Camper Jacks
  5. Legs
  6. Drop Leg
Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs

Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs

Item # TJD-7000-FT
lowest price pledge
Our Price: $33.20
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 6 lbs
Quantity: 
In Stock
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Replaces the 2" x 2" drop leg and footplate from your etrailer or Ram square, direct-weld trailer jack with a 7,000-lb capacity. Designed for TJD-7000 Series jacks. Call 800-298-8924 to order etrailer accessories and parts part number TJD-7000-FT or order online at etrailer.com. Free expert support on all etrailer products. Guaranteed Lowest Price and Fastest Shipping for Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (11)
  • Q & A (7)
  • Videos (1)
  • Photos
  • Why etrailer?

etrailer Accessories and Parts - TJD-7000-FT

  • Trailer Jack
  • Camper Jacks
  • Legs
  • etrailer
  • Drop Leg
  • 2 Inch x 2 Inch Tubing

Replaces the 2" x 2" drop leg and footplate from your etrailer or Ram square, direct-weld trailer jack with a 7,000-lb capacity. Designed for TJD-7000 Series jacks.


Features:

  • Replaces the drop leg and foot from your etrailer or Ram square, direct-weld jack with a 7,000-lb capacity
    • Designed for use with TJD-7000 Series jacks
  • Offers an additional 13-1/2" of travel
  • Durable zinc finish resists corrosion


Specs:

  • Tubing dimensions: 2" x 2"
  • Footplate dimensions: 8" long x 6" wide
  • Distance between adjustement pin holes center to center: 3-3/8"
  • Overall height: 17-3/4"


TJD-7000-FT Replacement Drop Leg and Foot for Ram Direct Weld Square Jack





Video of Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Trailer Jack TJD-7000-FT Review

Today, we're going to be taking a look at a Replacement Drop Leg with the footplate for square trailer jacks. This is designed as a replacement for your etrailer or Ram Square Direct Weld Jack with a 7000lbs capacity. It's designed for use with the TJD-7000 series, and it can be used for other applications as well. It's going to be a steel construction. It's going to have a nice durable zinc finish on it, so it's going to do a great job at resisting rust and corrosion. It is a square design, so if we take a measurement, outer edge to outer edge, that's going to give us a measurement of right at 2", so it's going to measure 2" by 2". The drop legs are designed to slide into the inner tube of the jack and secure with a pin and clip.

What this does is, it's going to give you more flexibility and adjustment when it comes to the height of your trailer jack. The footplate, it's going to be welded to the bottom of the drop leg. The footplate's going to give us a measurement, go in this direction, of about 6", and then go in this direction, it's going to measure about 8", so it's a nice large size. It's going to do a great job at spreading out the applied weight, even on softer ground, which is going to help prevent sinking. It also helps increase overall stability.

The drop leg is going to offer an additional 13-1/2" of travel. We can tell that by taking a measurement from the center of this hole right here, to the center of this hole. If we do that measurement, we can see that center-on-center is right around 13-1/2", so that means that it's going to be able to be adjusted in about 3-3/8" increments. The 3-3/8" measurement is going to be the distance that we have between each hole, center on center. Taking a look at the overall height, measuring from the bottom of the foot to the top of the tube, that's going to give us a measurement. Looks to be about 17-3/4".

That's going to do it for today's look at the Replacement Drop Leg with the included footplate for square trailer jacks.


Customer Reviews

Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs - TJD-7000-FT

Average Customer Rating:  5.0 out of 5 stars   (11 Customer Reviews)

Replaces the 2" x 2" drop leg and footplate from your etrailer or Ram square, direct-weld trailer jack with a 7,000-lb capacity. Designed for TJD-7000 Series jacks.

- TJD-7000-FT
by:

Great product. Fit and performed as exp ected 720939



- TJD-7000-FT
by:

It fits perfect thank you for your great work 693663



- TJD-7000-FT
by:

Great description quality product at a good price 663796



- TJD-7000-FT
by:

Replacement part perfect. Customer service even better. 654992



- TJD-7000-FT
by:

Purchased the drop leg with foot to stabilize the rear of my trailer when loading and off loading tractor. Product shipped early and delivered as promised. Used a 5/8” implement pin and custom cut sleeve out of 2 1/4” channel. Works great. 647013



- TJD-7000-FT
by:

good product as described arrived on t ime. 556015



- TJD-7000-FT
by:

Nicely galvanized drop leg. Looks just like the photo 555689



- TJD-7000-FT
by:

Worked just like the original 526241



- TJD-7000-FT
by:

Excellent quality on the parts!!! Shipping was super fast!!! Definitely my "go to" trailer place 492216



- TJD-7000-FT
by:

Fast shipping as usual. Legs look good, we will make sockets for them to slide in and mount to trailer. 394709



- TJD-7000-FT
by:

Fast delivery and great product and pri ce!! 379014


11
11

Ask the Experts about this etrailer Accessories and Parts

  • Dimensions Of Replacement Drop Leg with Foot for etrailer and Ram Square Jacks
    The Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks is a 2" x 2" square tubing drop leg. The leg is designed as a replacement for the etrailer or Ram square Direct Weld Jacks with a 7,000 lb capacity like part # TJD-7000 however it can be used to replace other 2" x 2" drop legs as well. I have attached a video for your reference.
    view full answer...
  • What are the Dimensions of the Replacement Drop Leg with Foot on # TJD-7000-FT
    The square tube of the Replacement Drop Leg # TJD-7000-FT, measures 2 inches x 2 inches. The overall length of this part is 18-1/4 inches tall and the foot plate measures 6 inches by 8 inches. The pin holes are 5/8 of an inch and the holes measure 4 inches apart. If your current jack leg dimension are the same then this replacement leg will work.
    view full answer...
  • Replacement Parts Available for the RAM Trailer Jack Part # TJD-7000S
    I do have several replacement parts available for the RAM Trailer Jack part # TJD-7000S but not an all inclusive rebuild kit. Instead you will need to select from the components listed below and repair the jack as needed. The most common fault on the above trailer jack is the spider gears and in order to replace them you will want to use part # TJD-7000S-GR. The rest of the replacement parts we have for the jack are listed below. If you can identify what is not working on the jack I would...
    view full answer...
  • Replacement Drop Leg and Cap for Fulton Square Jack
    For your drop leg, I recommend the Bulldog Square, 18-1/8" Tall Drop-Leg Tube - 7,200 lbs to 10,000 lbs # BD70129201 which has a tubing width of 2-1/4 inches. The replacement cap for the Fulton jacks is # F0917504-00. If you need the pin for the drop leg, use # BD500337.
    view full answer...
  • Parts Used To Create The Square Pipe Mount Swivel Jack With Footplate
    If you are looking for the parts needed to mount the jack # TJDP-7000S-B, the parts are already included in the packaging. To mount, place female pipe # TJP-FP58 in the proper location for trailer application. Weld on all the way around the female pivot pipe with 3/16" filet weld. Just in case you need it, I have the breakdown of the parts used to create the Square Pipe Mount Swivel Jack w Footplate # TJDP-7000S-B. You will need Replacement Drop Leg with Foot for etrailer and Ram...
    view full answer...
  • Will Drop Leg from Ram 7000 Series Jack Fit a Ram 8000 Series Jack
    If you are talking about the drop leg # TJD-7000-FT then it could fit your 8000 series jack as long as all the measurements match up. This jack is 2 inches square and the distance from the center of one adjustment hole to the center of the next is 3-3/8 inches.
    view full answer...
  • Is Fulton Wheel Assembly Compatible With Square Tube Jack
    Due to the unique configuration of the Fulton Wheel Assembly # F500266, it would not be compatible with a square 2" jack; I am not aware of a caster wheel assembly that will fit a square 2" jack tube, mostly because those jacks have higher weight ratings which means they only use foot plates like what you said you have. That means you would need to continue to use something like the Drop Leg with Foot # TJD-7000-FT which is 2" x 2" and has a 7,000 lb capacity.
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Cole B
Updated by:
Sarah W
Updated by:
Mike S
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.