In-stock alternatives that can ship today
Steel hitch bike rack offers hassle-free bike loading with fold-up anti-sway cradles and ratcheting straps. Cradles are set 7" apart so bikes won't become tangled on the rack. Arms fold down for storage, and rack tilts for cargo area access.
Features:
Specs:
Note: This dual-arm rack reduces the need for a bike frame adapter bar (sold separately) to mount a children's, women's, or alternative frame bicycle. However, to mount certain bikes or to keep your bike level on the rack, a bike adapter bar may be required. Most step-through bikes, dual-suspension bikes, and small children's bikes will require a bike adapter bar.
This easy-to-use, hitch-mounted rack lets you transport 2 bikes on the back of your vehicle. It has fold-up anti-sway cradles and ratcheting straps that make it easy to load and unload your bikes. The cradles are set 7" apart, so there's enough space between your bikes to prevent them from becoming tangled on the rack. HitchSwitch levers let you tilt the rack away from your vehicle for access to your rear cargo area and fold the arms down when not in use.
Folding Dual Arms with HitchSwitch Lever
The Camber has dual arms that provide your bikes with excellent support and ground clearance during transport.
The upper HitchSwitch lever lets you fold the arms down when not in use.
HideAway Anti-Sway Cradles
The Camber has HideAway anti-sway cradles that secure each bike twice along the top tube and once along the seat post or downtube. This reduces rocking to help eliminate bike-to-bike and bike-to-vehicle contact. The soft rubber cradles rotate around the arms to accommodate your bikes' frames. Each cradle is set 7" apart on the arms, so there is more space between your bikes when compared with many other hanging-style racks. The added space helps prevent your bikes from becoming tangled on the rack.
The cradles have grooves on the surface that prevent your brake and shifter cables from getting pinched.
Durable, dual-molded ratchet straps hold your bikes firmly in place on the cradles. You can remove the lower straps and fold the cradles up against the arms to make it easier to slide your bikes onto the rack.
Tilting Rack with HitchSwitch Lever
The rack tilts for easy access to your vehicle's rear cargo area. Just pull up on the HitchSwitch lever at the base of the rack, and lower the rack into position. When you're ready to go, lift the rack up until it snaps into place with an audible click.
The HitchSwitch lever is located right behind the base of the mast. This makes it easy to reach with one hand and steady the mast with the other.
The Camber easily installs in your hitch with the included threaded hitch pin. Just slide the shank into your receiver, insert the hitch pin, and then tighten it down with the included tool. The pin also works as an anti-wobble device to eliminate sway and rattle in the receiver.
Hitch Compatibility
The rack includes a sleeve that slides over the 1-1/4" shank to convert the rack for use with 2" hitch receivers. The sleeve attaches to the shank with a single screw and can be installed or removed in seconds.
Average Customer Rating: 5.0 out of 5 stars (7 Customer Reviews)
Steel hitch bike rack offers hassle-free bike loading with fold-up anti-sway cradles and ratcheting straps. Cradles are set 7" apart so bikes won't become tangled on the rack. Arms fold down for storage, and rack tilts for cargo area access.Easy to install and works like a charm . Being able to open the hatch on my Jeep by simply flipping back the bike rack is so convenient.. 698068
Was able to assemble and install in about 10-15 minutes. locks into place with no wiggle. 783922
Review from a similar Camber in Hitch Bike Racks
I recently purchased this Thule bike rack. It was easy to figure out how to use and easy to load the bikes on. It does take a few minutes to load 4 bikes but the more times I do it the faster I get! The bikes are secure and do not bang together. A great buy! 793602
Review from a similar Camber in Hitch Bike Racks
Product as described and fast shipping. Very easy purchase. 797795
Review from a similar Camber in Hitch Bike Racks
Very easy to install and to attach our bikes- two adult bikes and two children's 20 inch bikes. The bikes are very secure on the rack. There is minimal movement while driving. It is also easy enough for me to attach alone and I'm not that strong and I have a bum shoulder. This rack works perfectly with our 2019 Subaru Ascent. 803856
Review from a similar Camber in Hitch Bike Racks
Tule bike rack perfect as expected got here in a timely fashion considering shipping has been slow do to pandemic 797032
Review from a similar Camber in Hitch Bike Racks
I love this bike rack. I installed it myself. It was very easy. Loading the bikes on the rack was simple too. I drive a Yukon XL. Because my SUV is already long was worried that I wouldn’t be able to close the garage door with the rack attached. I was pleasantly surprised when I saw I had enough room when I folded the rack down. However, I can’t have the rack in the raised position and close the garage door. But that’s ok because the bikes are so easy to remove from the rack. 793996
Do you have a question about this Hitch Bike Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.