Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 2-bike rack has an integrated ramp that lets you easily roll your heavy electric bikes up and onto the trays - no lifting required. When you're done simply remove the ramp and store it onboard. Tilts with bikes loaded for cargo area access.
Features:
Specs:
California residents: click here
Very sturdy, pin very hard to insert, my wife can’t insert it.
Except for problem with pin I would buy again. Very heavy not something to take off and on every time you ride, have to just leave it on the car all the time.
Do not buy this rack!
The bikes barely fit next to each other especially using on the only 1 upright bar.
This rack needs 2 upright bars!
The clamps to hold the bikes to the upright bar are to short causing the bikes to rest on each other. Even when bikes are opposite facing .
The ratchet clamp used to cinch down the clamps to the bike literal feel apart in my hand. I wasn't even tightening it yet.
Getting the bikes past each other and clamps is a nightmare!
Completely regret this very expensive purchase.
I chose this one because of the weight it could carry while using a 1 1/4 inch hitch.
DO NOT BUY
There is only one issue with the On ramp LX: Overuse of blue locktite at the manufacturing plant on the screws that attach the tray extensions. The knobs to tighten the adjustable trays CANNOT BE TIGHTENED! I had to use thick fender washers to get the required 3NM of tension on the knobs that tighten the adjustable trays because I could not screw the darn things past all the blue threadlock!
Installed rack on my GMC truck to test out, was able to load my two electric bikes by myself, with two people would be much easier. Rack is very well constructed, yet easy to install on hitch. Will be doing road test in January, mounting on 5th wheel and going from New Jersey to Florida.
It is very sturdy for holding our two E-bikes on our small motorhome. I like that the ramp breaks down and attaches to the rack vs having to store it. Also, the adjustment for the wheelbase, although it sometimes gets out of alignment.
Nick S.
9/22/2025
I am glad this is working out for your and your ebikes! What kind of motorhome are you hauling the bikes behind??
The Yakima OnRamp LX Electric Bike Rack - 2” Hitch - Frame Mount is a quality made rack.
Ordered the Yakima OnRamp LX to carry our 2 Electric bikes on the back of our Bronco Sport. It is a little complicated to get set up, (guys don't like to read directions - but that's what wives are for I guess) Once it was all put together though it worked great. Will be a good addition for our trips with the bike. Also wanted to give a big THANK YOU to the folks at Etrailer!! I had an assembly question and they were very helpful and answered it quickly. Looking forward to the ride.
Brooke M.
4/15/2025
My husband and I the opposite, haha! He's all about the details my style is more ready, fire, aim lol. So happy we could you out with install. Where's you favorite place to go riding?
Brooke M.
4/22/2025
I did like almost everything about this rack. I was shopping for a rack that would hold two e-bike and was approved for use on a bumper pull travel trailer. First the sales representative at eTrailer was excellent in verifying the mounting on out trailer. The order process was quick and smooth with no issues. My order was shipped the same day that it was ordered. I was shocked at how fast the carrier was delivered, two days after it was ordered. To put the carrier together was basically one bolt. The weight was not a problem to get into the receiver on our trailer. The next was to mount the bikes to the carrier itself. The Ramp worked well with the 70 pound e-bike. Adjusting the was a bit of an issue. With how the hold down straps are mounted you have to adjust the sliding rails to fit the wheel base of your bike. When I had both of my e-bike mounted correctly the wheel only had about an inch and a half of the trie on the rail it self. I have Searched for rail extenders but have not been able to find any. Looking at my photos you will see that they need to be about 4 to 5 inches longer. Once strapped in they are secure at least while the trailer is not moving. I plan to make some extensions for poly carbonate.
I used all of etrailer's videos to help me decide on the best rack for my needs. This will work great for me because our bikes both have fenders and we will only be transporting the same two bikes. Plus it is strong enough for an RV and a cover which is important to us.
Gwendolyn Y.
4/1/2025
I'm really glad our videos help! I'll make sure to pass this on to my video team :)
Product arrived promptly and in quality packaging. Assembly instructions were clear and concise. Put the Yakama rack together in about 20 minutes. I am very happy with the heavy duty construction of the rack. I have two Aventon Aventure 2 e-bikes that weigh over 70 lbs. The rack handles the load great.
The ordering process, the delivery time and the product condition when it arrived were all wonderful. The assembly and installation of the bike rack ... and the accompanying light package ... wwas simple, well documented and successful. Overall ... an extremely satisfying experience.
Mounted on Escalade, ramp is quite steep, tough for 80 pound bike and must be on level ground or ramp may not reach ground. Other than that the rack works well.
Very solid and sturdy. Assembly straight forward. On fist trip now.
I haven't had an opportunity to use my purchase as of yet, but working with etrailer merits the 5 star rating. I ordered my bike rack on Wednesday afternoon before Thanksgiving and it was delivered on Saturday. Fantastic turn around time. Couldn't ask for more than that.
Looks like it will work great!
Kevin
6/19/2025
The Yakima bike rack is fantastic. I enjoy the ramp to help load and unload the e-bikes. The Yakima brake and turn signal that I added help with traffic safety.
Very durable piece of equipment. Only had it for a few days but getting ready for a 2,000 mile road trip
Set up was a breeze. Light weight and bikes fit perfectly.
Easy to install and load bikes. Very sturdy and smooth operation
I'm very happy.
Most e bikes are up at 80lbs.
Yakima has been in the game for a long time and this unit is built like a tank.
The unit is heavy, but it speaks for itself.
If you are traveling any distance this is the most stable unit I have owned.
Arrived damaged. Emailed Yakima for support several days ago but no response.
Mike L.
9/21/2025
I'm sorry that happened! I'll have our Customer Service folks reach out to you.
Excellent product. Well made.
The rack was very simple to assemble and install on my 2023 Hyundi Palisade. The ramp makes it so much easier to load my Electra cruiser bike. I have ordered an electric bike from EBC, and I can't wait to try loading it. I will try to follow up when I get the new bike and use the rack some more.
Ed
9/6/2025
Not so great. The center post on the Yakima on ramp lx just didn’t work out for our e-bikes. It was difficult getting the position just right to secure our 2 bikes and they ended up rubbing the paint where they contacted them. We ended up buying a new Kuat rack that secured the bikes using the tires and with no contact on the frames.we travel full time in our Rv and the bikes are jostled regularly. The Kuat was even more expensive than the Yakima but to us it is well worth it.
Do you have a question about this Hitch Bike Rack?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
9/29/2025
I am glad it has been working well besides the screws. I do appreciate the feedback and that is something I will definitely pass along. Besides that how are you enjoying the On Ramp?