Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black
(104 reviews)
Price: $262.37
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black
Item # SC63VR
Retail:$284.01
Our Price: $262.37
You Save: $21.64
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that are ready to ship
- All Info
- Reviews (104)
- Q & A (0)
- Photos
- Used (1)
Stromberg Carlson Camper Jacks - SC63VR
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- Electric Jack
- Stromberg Carlson
- 1 Jack
- 23 Inch Lift
- Bolt-On
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.
Features:
- Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily
- Top-mounted toggle switches are easily accessible
- Large LED side lights make it simple to set up your camper at night
- Also ease weight distribution hookup and disconnect
- Bubble level on top of housing helps you level your trailer
- Bull's-eye design shows front to back and side to side
- Drop leg allows for greater adjustability
- Rust-resistant powder coated steel parts are strong and durable
- Housing is made of vacuum-formed plastic for protection from the elements
- Black cover is painted to resist fading
- Round, zinc-plated steel footplate provides stability
- Emergency crank (included) allows you to manually operate jack if needed
- Easy bolt-on installation for A-frame trailers
- 3 Star washers included for making a good ground from jack to trailer
- Mounting hardware sold separately
Specs:
- Total lift: 23"
- Screw travel: 18"
- Drop leg: 5"
- Lift capacity: 4,500 lbs
- 2-Year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
JET-4500 Stromberg Carlson Electric A-Frame Trailer Jack - Black - 23" Lift - 4,500 Pounds
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Defective
- Arrived Damaged
- Wrong item was ordered
Customer Reviews
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black - SC63VR
Average Customer Rating: 4.6 out of 5 stars (104 Customer Reviews)
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.by: Robert H05/02/2023
This was a great replacement for our 4 year old Keystone Springdale trailer jack that bit the dust. Installation was easy and is much faster and quieter than our RAM jack that came with the trailer. I did sand down the paint on the contact points to make sure of a good ground then painted over what was exposed. I liked it so much I'll be looking at getting one for my large utility trailer.
by: Grant 05/16/2024
It arrived quickly and I installed it the same day. Installation was simple and straight forward. It works great. I highly recommend. I installed this jack on a Lance 1575 travel trailer. So glad I finally did this!
by: Mark 01/01/2024
Shipping was exceptionally fast, the jack works great, although I can for see the rubber on the toggle switches will probably either wear quickly or possibly the weather/sun will deteriorate sooner than later.
by: Steve10/11/2023
So far not satisfied with this jack. It was easy enough to install BUT the up down switch is reversed so up is down and down is up. The motor will make 1 lift and shut off for 10 sec. or so. defantley not worth this kind of money
Jenny N.
10/16/2023
It does sound like this jack may need replacing. I will have our Customer Service team reach out to you to assist.
by: Anthony 12/04/2023
we ordered the jack .It shipped quickly. easy installation no problems works great.
by: Randall 04/30/2024
Works excellent! Highly recommended!
by: Jeff 02/24/2024
Great product, should include wiring in structions.
by: Keith 09/16/2023
The Strindberg jack works like a charm. I especially like that it automatically shuts off before it runs out of jack room on the shaft, both up or down. Really great product.
by: 50Gage03/01/2024
The jack is great. Works perfectly.
Not too happy with whatever delivery service was used. Left this leaning against my mailbox at the edge of the street…
But it came quickly and wasn’t stolen.
by: David03/21/2023
Nice unit, dropped right in. Goes up and down. Haven’t used it yet under load, but sure makes it easier to connect and disconnect the trailer.
by: Tony 06/22/2023
Jack installation was quick and easy. I have bought a lot of trailer equipment from Etrailer and they have been very good company to deal with.
by: Bradford05/20/2023
This jack did not work right out of the box. It would retract but would not extend. Not only that, but when I tried to use the manual jack handle the unit would not work either. I had to use a bottle jack to get the trailer off my truck. etrailer was extremely helpful and helped me choose a different unit. They promptly sent to me the return shipping label for this defective unit.
by: Marvin 04/10/2024
Great jack for the money!
by: Randall 11/28/2021
Thank you etrailer people for your fine service. I can not really rate this jack until I use it for at least a few months. But I can say that this electric jack works great just out of the box and it came with all the proper hardware for a good installation.
Randall
12/2/2022
Well a year later and all is well. We treat our jacks well and completely cover them in a plastic bag.The switches can be operated with the bag on.
by: Gary 12/02/2023
Very easy to install. Much more sturdier then the previous one.
by: Mark 12/29/2023
Installed easily with the parts provided. Works smoothly and quietly.
by: Philip03/13/2023
The new SC jack shipped quickly. Easy to install on my 20 ft. power tilt car carrier because I was only replacing a cheap electric jack from [online vendor] that had just failed rather than a new install.
I did have to turn the star washers over because the pointy side has to scratch through the paint to make a good ground contact but everything else was easy-peasy. You can tell that this new jack is a much more quality product. Works great/ much quieter than the old power jack. Thanks etrailer!!
by: Steven06/21/2023
The jack is in a slow failure mode. There seems to be some resistance in the jack as it keeps getting slower and slower at one year old. I’m waiting for the day it completely stops working. Voltage and ground are normal.
Katrina B.
6/29/2023
I have gotten in contact with the manufacturer. We are needing some more information in order to assist you better. Do you have a 30 Amp Fuse attached correctly? Make sure it is not loose or anything. Also please check to make sure that you have at least 12 volts coming to the jack. If it is less then 6, you will need to recharge the battery or change it. Also please look at all the wires inside the head of the jack to make sure nothing has come loose. One thing it could be, is if the jack was not hooked up as the instructions state, then it could be an issue with something in the RV. This is not a normal thing to happen with a jack that is one year old.
by: Allen05/12/2023
I just installed the jack and haven't had chance to use it yet
I will know more next week when i return from camping to let you know how it performs
As far as delivery I am well satisfied with the amount of time in which I received it
Thank You
by: Harry 12/12/2023
This 2nd elec Jack I’ve purchased & very happy with them
by: Mike02/26/2023
etrailer helped me with no questions asked when a product came damaged by UPS. Got me a replacement before I could even box up the broken one to ship back.
by: Michael02/27/2023
Sent an open package we should have refused!! It turned out to be defective. Took my time to install for nothing!!! Thank God Stromberg is sending a replacement. Leaves a bad tast to ever order from etrailer again. They dumped a unit on us that should have been tested first!
by: Brian 06/02/2023
Came fast and installed it, it works up and down so got to see how long it last. Was easy to install and hooke would recommend if it for better than a hand crank
by: Harold05/16/2023
Box was in bad shape jack was up side down in box up looks ok you need to look at your packing
by: John 12/17/2022
Was ready to move our trailer to winter storage and found out that the electric jack was frozen up. Would not even hand crank. Needed a new jack fast. New trailer jack from eTrailer came in only two days in spite of snow storm. Easy to install so we are back in business.
25
104
Show More Reviews
See what our Experts say about this Stromberg Carlson Camper Jacks
- Powered A-Frame Trailer Jack Cannot Retract After Being ExtendedIt definitely sounds like your jack may have been over extended. On a lot of powered A-frame jacks when this happens it ends up warping the nut and screw that allows the jack to travel up and down. Unfortunately there isn't a way to fix or replace this component so the jack will need to be replaced. I have attached a short video demonstration that you can also check out. I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds...
view full answer... - Electric A-Frame Jack Recommendation for a Camper TrailerIt looks like you are looking for an electric jack recommendation for the trailer in the picture you submitted with your question. Since it looks like you have an A-frame jack I would recommend the Stromberg Carlson # SC63VR Electric Trailer Jack. This is the most popular A-frame jack we offer because of how well it works, the high lifting capacity and exclusive stops that prevent over extending or retracting the jack foot. It also features a drop leg you will appreciate when parking...
view full answer...
- Trailer Jack Recommendation to Replace Bent Inner Leg of Stromberg JackI wish we carried a replacement leg but we do not at this time. Only option we have is a new jack. For a replacement, I recommend the Stromberg Carlson # SC63VR. It has a lifting capacity of 4,500 lbs which would be more than you'd need but will ensure that the jack will operate quickly and last a long time.
view full answer... - How To Bypass the Switch To Test the Motor On a Husky Brute Electric Trailer JackThe process that you are referring to for the (Discontinued) Husky Brute Electric Trailer Jack means that you will need to take the power wire that goes from the back of the switch to the motor (trace to confirm) and then attach that directly to a 12 volt power supply. If the jack works once this is done then you know the switch is bad and it can be replaced. However, if the jack still does not work even when direct power is applied to the motor and you have checked the ground then the...
view full answer... - Powered A-Frame Jack Recommendation for R-Pod Trailer for Installing Weight DistributionFor your trailer all of our powered A-frame jacks would fit and work well. I really like the Stromberg Carlson Electric Trailer jacks like part # JET-5000 or # SC63VR. I would recommend the # JET-5000 because it has a 5000 pound capacity which wouldn't have to work as hard, would be faster, and would last longer as a result.
view full answer... - Replacement Lippert A-Frame Jack Solution for Jack with Bad GearsIf you have a Lippert powered A-frame jack like the part # LC285318 and it has bad or damaged gears your only solution will be a new jack as the gears are not available as separate items. That said my favorite powered jack to recommend is theStromberg Carlson # SC63VR, as it has tremendous lifting power and it also shuts off automatically before topping or bottoming out. Other jacks will allow you to go too far with the jack but in doing so you damage the threads of the screw like it sounds...
view full answer... - Powred Jack Recommendation to Replace Non-Powered JackYou are going to have to remove your current A-frame jack and replace it with one that does have a motor as there isn't a way to add motors to jacks that don't currently have them. I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds of tongue weight. This is 1000 pounds more than other models, and even though you may not need this much capacity, you will find that the jack motor runs quick and effortlessly. This will add years...
view full answer... - Is There a Way to Replace Cracked Screen on Lippert Smart JackThe only way to get a new control panel would be to replace your entire Smart Jack with part # LC643589. I reached out to my contact at Lippert who confirmed that the only replacement parts for the jack includes hardware like the pin or the footplate. With this being the case your best option to protect the buttons is a trailer jack cover like part # UF38-944020. If you'd rather use a different jack then I recommend the Stromberg Carlson # SC63VR because it is rated for 4,500 lbs, features...
view full answer...
- USA Made Trailer Axle, Wheel/Tires, and Trailer Jack for 3,500 lb Trailer AxleDexter axles like the part # 35545E-ST-89 that you referenced are made in the USA. This is a 3,500 lb axle like you want but you need to determine which is the correct length axle for your trailer first. I've attached a photo showing where to measure your axle for the correct length. I've also included a link to our axle product listings. Once you know your measurements, you can use the filters on the left side of the page to choose the correct axle. Or, if you'd like, you can send me...
view full answer...
- Best Replacement for the Lippert Smart Jack Electric Trailer JackThe Lippert Smart Jack Electric Trailer Jack part # LC643589 is a good innovative option with memory features but it does have a design flaw in my opinion. The touchpad or controls are on the top of the jack. The reason that this is a problem is because the seals around the controls break down over time and water gets inside ruining the jack. This could be attributed to rough use, bad seals, but the touchpad being directly on the top of the jack means water can come straight in as opposed...
view full answer... - Troubleshooting Husky Brute 4500 Trailer Jack Not Operating with ControlsIf your Husky Brute 4500 isn't extending or retracting properly then I recommend using the manual override to see if it's something internal or if it's an electronic part of the jack. For a replacement electrical part you'll need to contact Husky directly since they should have something for you. If it's internal then I recommend replacing the jack completely with the Stromberg Carlson Electric Trailer Jack # SC63VR. This is an A-Frame jack rated for 4,500 lbs and it offers a 23" lift...
view full answer... - A-Frame Electric Power Jack Recommendation For TrailerWe've got several electric A-Frame jacks that would work perfectly for you. If your trailer weighs just shy of 10,000 lbs, the trailer's tongue weight is likely somewhere in the neighborhood of 1000-1500 lbs, so you'll want a jack with a capacity greater than that. The greater the capacity of the jack, the less hard it'll have to work and therefore the longer it will last. Because of this, I'd recommend going with the highest capacity jack your budget will allow. My go-to recommendation...
view full answer... - Recommended Jack To Replace Husky Brute HB4500 With Damaged Lower Jack AssemblyI have a replacement jack option for you, but the lower jack assembly 87460 you mentioned for your Husky Brute Jack HB4500 has been discontinued as it was for the older model jacks. Since your lower jack assembly is damaged you will need to replace the entire jack instead. For a jack with the same 4500lb rating I recommend the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black # SC63VR which offers up to 23" of lift, has a 2-year warranty, and will...
view full answer... - Light on the Lippert Electric Trailer Jack Works but No Power to LegThe problem you are describing on your Lippert Electric Trailer Jack part # LC285318 could be caused by a few different things. The most common problem we see that allows the light to work but not the leg is a bad ground. This could very well still allow for the light to function but not allow for enough power to operate the leg. I recommend checking the mounting surface that the jack is attached to since this is how it grounds. I would then remove the jack, sand down the surface with some...
view full answer...
- What is Purpose of Small Metal Tube that Comes with Stromberg Carlson Electric Trailer Jack # SC63VRThat small metal tube you mentioned is the clutch release for the motor of the Stromberg Carlson Electric Trailer Jack # SC63VR. If you were to need to manually raise or lower the jack you'd insert that metal piece into the side of the motor to release the jack clutch so that it can actually be manually raised or lowered.
view full answer...
- Powered Trailer Jack Recommendation for a Trailer that with a Weight DistributionSounds like going to a higher rated electric tongue jack would be your best option. The higher rated jacks are great for using when installing a weight distribution, but there's not way exactly to know how much capacity you would need so we recommend going with the highest one just to be sure. I would recommend the Stromberg Carlson # SC63VR. This is a 4,500 lb jack that I can guarantee will have enough capacity for your setup and would be your best option. This jack has a clutch that...
view full answer... - Replacement Jack Recommendation for Damaged Bulldog Powered A-Frame JackThat is a really frustrating way to damage a jack. I wish we had the components you'd need to fix your Bulldog part # BD500200 that you referenced but Bulldog basically only offers replacement switches for this jack. You are going to need a new jack. I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds of tongue weight. This is 1000 pounds more than other models, and even though you may not need this much capacity, you will...
view full answer... - Electric A-Frame Tongue Jack for 1998 Sundowner Horse TrailerSundowner made both bumper-pull A-frame trailers and gooseneck trailers in 1998 but it sounds like you have a bumper-pull A-frame type and need an electric tongue jack. We like to suggest using an electric tongue jack with more weight capacity than you will actually need, since this this tends to improve both reliability and the jack's working lifespan. One of the best options is the Stromberg Carlson # SC63VR. Unlike most jacks, this one has stops that prevent over extending or retracting...
view full answer... - A-Frame Jack Recommendations with High Capacity and High LiftI believe your best option would be the etrailer.com Round A-Frame Trailer Jack - Sidewind # TJA-5000S-B. This A-frame jack has a 5,000 lb capacity and has 15 inches of lift. There is no way to remove the handle or any of the other 5k jacks so that it could be operated with a power drill. A powered jack like the part # SC63VR might be a better option. This is the highest rated powered jack we have at 4,500 lbs and has 23 inches of lift. I attached a review video for you to check out.
view full answer... - Solution for EAZ Powered Jack that Foot Plate Drops and Fuse BlowsWe don't carry the EAZ brand of powered a-frame jacks so it's a bit harder to speculate. But if the foot plate keeps dropping and the fuse keeps blowing it sounds like the jack has seen better days and is in need of being replaced. My favorite powered jack to recommend is the Stromberg Carlson # SC63VR as it has stops to shut off automatically before topping or bottoming out. Other jacks will allow you to go too far with the jack but in doing so you damage the threads of the screw. It...
view full answer... - Recommended Electric A-Frame Jack for a 2016 Keystone Hideout 29BKSFor your 2016 Keystone Hideout 29BKS, I recommend going with the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White # BD500200. This includes 3 LED lights making it easy to set up at night and the built-in level has springs for simple, accurate leveling. With the drop leg and 22 inches of lift, it is an ideal choice for just about any trailer.
view full answer... - Who Makes The Lowest Retracted Height Electric Tongue Jack?As far as the lowest retracted height, the Stromberg Carlson Electric Trailer Jack # JET-3555 will be your best bet with a retracted height of 8-1/2". Everything else we offer has a retracted height of 9" or more.
view full answer... - Electric A-Frame Trailer Jack for a Jayco 267 BHSA popular A-Frame trailer jack is the Stromberg Carlson # SC63VR, rated for 4,500 pounds. sdThis jack also cannot be over extended which is another thing that can cause other jacks to fail. I have included a link to a video featuring this jack for you. This is the one that I would purchase if my tongue jack fails.
view full answer... - Electric Trailer Jack and Landing Gear Recommendations for 3 Different Trailerst sounds like you have 3 heavy trailers! For the first two trailers I recommend using a landing gear set such as # UF17-943010 rated for 12,000 pounds total. Each jack has its own motor so they can be raised and lowered independently of each other which is great for keep the trailer level. For the third trailer I recommend the Stromberg Carlson # SC63VR which is rated for 4,500 pounds. Since the jack will be mounted towards the front of the trailer it will not have to handle the total...
view full answer...
Do you have a question about this Camper Jack?
Used Items Available
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Michael B
Written by:
Mike S
Installed by:
Adam E
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert H.
5/3/2024
Still working great after a year of use