To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 3/4" thick shackle mounts on your bumper where the D-rings are attached.
Features:
Tow your off-road vehicle with your Roadmaster motor-home-mounted tow bar using these adapters. Simply attach the adapters to your tow bar's arms in place of the quick-disconnects. Then remove the D-rings from your Jeep's bumper and hook the tow bar up to the shackle mounts. These adapters fit shackle mounts that are 3/4" thick. They attach to the mounts using the holes where the D-rings are mounted. The adapter pins include sleeves that allow them to fit in both 7/8" and 1" diameter holes.
Average Customer Rating: 4.9 out of 5 stars (61 Customer Reviews)
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 3/4" thick shackle mounts on your bumper where the D-rings are attached.These mounts are part of the excellent Roadmaster tow bar system. With these mounts I can leave the Roadmaster cross-bar in the garage and use the shackle mounts in the bumper instead. Takes a bit of creativity to arrange for safety cable connection points and a new place to hook the winch cable but these efforts are well spent in order to clean up and simplify the tow system. Kudos to Roadmaster for this item and to etrailer for making it available. This comment applies to both the RM-035 and the RM-035-1. 446010
Robert - 10/25/2018
The ends are heavy, strong , well made, fit my existing tow bar and work just fine ( as advertised). I ordered them to replace another style end due to changing tow vehicles, and the mounting point style/setup on the jeep. The ends have a 1" ID measurement. On the vehicle i went with a bracket setup from Maximus-3. There a frame mounted bracket setup using U-Bolts. There a D-Ring/tow loop setup. The bracket end, or ear where pin goes thru is 3/4" wide. This leaves a 1/4" of slop when mounted, which I wasnt 100% thrilled with. So, I ended up adding a thick washer on each side to take up the 1/4" of slop. A little bit of a pain when hooking g/un-hooki g, but completely functional with no issues. I called maximus to see if they could make their bracket in 1" wide matl and they said no, not an option. Again, all in all functional.. 576057
Great product bee towing a Jeep jk with them no issues and were easy to install 683936
Fit correctly and instructions were clear and understandable. 572336
Erwin - 10/07/2019I bought a Falcon 2 tow bar, but the height of my 2007 Duramax, was to low for the 93 YJ, (lifted 2 1/2 inch and 35 inch tires) I was towing behind. So I bought the Roadmaster High/Low adapter to get me where I needed to be. I then also wanted to simplify the connection on my front Warn bumper, because I had the D-Ring plates already there and welded in place from Warn. So I also ordered the 3/4 inch D-Ring bar adapters. Man, I have to say, this made hooking up and flat towing my YJ around, so much easier. Everything is heavy duty and made better than I thought it would be. Be careful when ordering the D-Ring adapters for your particular bumper, they make a few different sizes. Measure twice, order once. 514729
These are what I had been looking for and they wernt even available from the manufacturer. They come with a slip in sleeve for one inch clevis tabs but are 7/8 hole and 3/4 inch wide slot. I'm using it on the falcon 2 tow bar. These ends come with slip on tips that must fit a different bar from the vendor BUT they can just be unbolted and are a direct fit to my thread on ends of my tow bar. Perfect fit! See photos of the last end pieces I tried as well from Amazon. 286061
Ronn w - 11/01/2017These two products made it possible to tow my lifted jeep with an after market front bumper thousands of miles without any issues 379387
Nice workmanship. Only problem is for $100+ a person would think the part would fit perfectly. Notice the piece with the hole, which attaches to the tow bar? It was not threaded to fit the bar. I used the old bar attachment fitting and will probably toss the "new" pieces. etrailer did a great job getting the part to me. 430218
This piece will not work the way you said it would work. Very disappointed The falcon to towbar will not connect to these Fittings! The part that connects it to the falcon 2 Has a threaded end on it . The piece you sent me has a bolt that goes through a pipe that is approximately 1 inch. The threaded in on a falcon two is approximately 3/4 of an inch. Part totally wrong in every way 577224
Heather A - 10/30/2018Works great. Fits the D rings on my Jeep perfect. 655118
The adapters were exactly as described. This is the only way to go when attaching a Roadmaster tow bar to your d ring bumper. Took a bit of force, but I was able to press the provided bushings into the d ring. 420827
Joel P - 08/17/2018Ashley was awesome to work with 866788
Product works great, no problems whatso ever. 816789
Excellent product. The quality and design is great. I highly recommend the Hopkins wiring components to match the Falcon2 tower, it is so simple to connect. 809524
Great product and value 808207
Great product, easy instructions. Works as advertised 808200
I have a Jeep JKU with an aftermarket front bumper. This product allows me to use the D- ring mounts to tow the Jeep with my Falcon 2 tow bar. It worked perfectly no problems. The longest trip towing the Jeep was from SoCal to South Dakota and back. This setup worked flawlessly. One of the awesome things about this product is it came with inserts that allowed me to use these with my 1 inch diameter D ring holes because these are 3/4 inch 794128
We use the adapters to tow a Jeep with an after market bumper. Have towed the Jeep several thousand miles with out RV with no issues. Easy to install and attached to the bumper. 751389
Very well made, another great product from etrailer 749120
Nice looking parts. I think they’ll work well. 726242
We have been very happy with our purchase. Road master products are to us more versatile with more options than the competition products. Thanks Again!! 718423
The adapters fit the "D Ring" shackle points on my front bumper perfectly allowing me to use the Roadmaster Nighthawk All Terrain tow bar on my 98 Jeep Wrangler. Just returned from a 2800 mile road trip and this combo made hooking up and unhooking so easy, all I can say is I wish I had done it sooner. Thank you Julie N. for all your help. 714241
Easy to install, very heavy duty, perfect for the new Jeep 696765
They are exactly what I needed. Great product. Great service 664368
Adaptors work great, good design and quality constrution. It was nice to get rid of all the weight and complexity of the base plate and just hook up to my bumper. When the package arrived it was missing parts, called customer service and the missing parts where sent the same day. Excellent company with great service. Will continue to use them. 659365
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Helpful Link
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.