2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 10" Lead

2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 10" Lead

Item # A45CB

lowest price pledge

Retail:$2.52

Our Price: $2.10

You Save: 17%
Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.04 lbs

Quantity: 
In Stock, Ships Today
A45CB - Wiring Optronics Accessories and Parts
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Trailer Lights
  • Wiring
  • Plugs and Pigtails
  • Optronics
  • Two Wire Pigtail
  • 10 Inch Long
  • Straight Pigtail
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 10" long. Designed specifically for backup and utility lights. Call 800-298-8924 to order Optronics accessories and parts part number A45CB or order online at etrailer.com. Free expert support on all Optronics products. Guaranteed Lowest Price and Fastest Shipping for 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 10" Lead. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (47)
  • Q & A (62)
  • Videos (1)
  • Photos
  • Why etrailer?

Optronics Accessories and Parts - A45CB

This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 10" long. Designed specifically for backup and utility lights.


Features:

  • Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer
    • Designed specifically for use with Optronics backup and utility lights
  • Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light
  • 2-Wire pigtail
    • White wire for ground
    • Red wire for power
  • #10 Ring terminal on ground wire
  • Approximate wire length: 10"


diagram of A45CB_4

Pigtail is a direct replacement for:

  • Wesbar # 729062
  • Truck Lite # 94925
  • Grote # 67010
  • Peterson # B431-49


A45CB Optronics Straight 2-Wire Pigtail for Trailer Back Up Lights

Alternate part number: A-45CB







Video of 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 10" Lead


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Optronics Trailer Lights A45CB Review

Today we're going to review part number A45CB. This is the Optronics straight 2-wire pigtail for the trailer back-up lights. This is 2-prong, all-weather, molded plastic plug with the 6" long wires. This provides a power connection for sealed lights, specifically the backup lights. It is a 2-wire design, features these color coded wires. The red one is the 6" hot wire or lead wire, which is bare at the end for making your power connection, and the white one is a ground wire and it has the number 10 ring terminal on the end. These are designed for the single contact seal lights.

I've got an example here of an Optronics lights that would use this. This is a clear back-up light. If you can see on the very back, it does have a 3-prong design. A lot of the lights will have a 3-prong but in this case, for the back-up light, you'll only need the 2 prongs to operate it, so this 2-prong will work in there. Basically, what you would do is just take this plug, line the holes up, push it in and then you got your power connection. Again, this is called a straight 2-wire.

The reason they call it a straight 2-wire is because when you plug it in, the wires will come straight out from the back of the light. They do offer another 2-wire plug that we do sell separately on our website. It is the right angle plug and what happens there is you can plug it in and the wires will come at a right angle to the light. Sometimes it depends on your application which one you would need. That one we do sell separately also.

It's part number A49PB. That should do it for the review on part number A45CB. This is the Optronics straight 2-wire pigtail for trailer back-up lights. .


Customer Reviews

2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 10" Lead - A45CB

Average Customer Rating:  4.7 out of 5 stars   (47 Customer Reviews)

This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 10" long. Designed specifically for backup and utility lights.

- A45CB
by:

Replaced the reverse lights on my 2009 Mastercraft trailer. Easy splice into trailer wiring and snug fit into new light (item BUL72CB). 399083


Comments

So far so good, they are working as expected and I may have to replace a few on the other side of the trailer with the same items.

Sean - 06/29/2018

40367

- A45CB
by:

Quality products. Quick shipping. 673478



- A45CB
by:

always as advertised, a perfect fit 655328



- A45CB
by:

This is a really great place to buy whatever you need for a trailer. 653519



- A45CB
by:

Love your products , this my third orde r! 653426



- A45CB
by:

The Backup Lights work very well. Thank s. 637214



- A45CB
by:

I called and spoke with Lisa D for a special order product that E-trailer needed to order directly from the manufacturer and have it added to their website, and Lisa D kept me updated every step of the way. She got the products order and shipped with a very quick turn around time, which was great b/c I couldn't find any company that could assist me with ordering the lights that i wanted. Very pleased with E-Trailer and Lisa D. 634025



- A45CB
by:

Not much to review, these items are exactly what they were described as, and it made installing my new trailer lights extremely easy. For the price, it's 100% worth it as a purchase companion for said tail lights! 612185



- A45CB
by:

Website suggested that I would need these, glad that I ordered them. They worked great. I ran into a clearance issue and ended up needing the elbow low profile plug end instead. However, I didn't know that was the case until after I cut the hole into the fiberglass and test fit the light. 584175



- A45CB
by:

Great service! Parts ordered arrived in record time, order was complete, and no problems. I had ordered same parts from another supplier, waited 5 weeks and when order arrived it only had one light not two as were ordered. Still having issues trying to get that order resolved. You guys make it easy, will get more orders from me as well as letting my friends know where to order from. Thanks 556768



- A45CB
by:

Exact match. 500057



- A45CB
by:

Super Fast Delivery! Correct and QUALITY parts! 467828



- A45CB
by:

product arrived as advertised 453515



- A45CB
by:

Excellent products and service. I will be inquiring soon on a set of 7000lb axles with springs and all hanger hardware. 439353



- A45CB
by:

I ordered the STL101RB Trailer Tail Light - Stop, Tail, Turn, Backup - LED to replace the standard tail lights on my Yamah Drive G19 golf cart. They replaced to stock ones perfectly as a neat way to add a backup lights for a custom feature. The backups led are actuated by the reverse switch on the dash. It should be noted that the ground terminal on the two wire pigtail connection is not wired internally to the backup LEDs. They rely on the ground supplied by the three wire pigtail. Not a big deal, but worth noting. It throws a curve when bench testing. These lamps add a nice custom touch! 423713



- A45CB
by:

ok 413010



- A45CB
by:

I purchased these Submersible LED bulbs for my boat trailer for two reasons. The first is so road traffic is aware of my intentions of backing up and the second is to make it easier to back my trailer into my driveway at night. The only thing that I find disappointing about this product, is that the wires are not sealed. You have to plug a pigtail in to power the bulb. Although they say it is watertight, I still plan on sealing the plug with some marine grade silicone sealant. Otherwise I am very satisfied with the way these bulbs light up my path of travel. 376429



- A45CB
by:

Good piece to have for cheap 372491



- A45CB
by:

I have been ordering lights for multiple trailers over the past few weeks. All of the lights that I have ordered have been made by one company, yet they have different connectors. WHY WHY WHY??? Get it together.... please ?!? Or please explain to me why you would put male bullet connectors on some lights and female bullet connectors on other lights. I should have one set of connectors that I have to buy to make connectivity... now you are forcing me... and the customers that by from my to do the same. 349781



- A45CB
by:

plugged right in as advertised. 325440



- A45CB
by:

Again not sure why these don't come with lights. :(:( 324821



- A45CB
by:

Sealing to back of light doesnt seam robust sense the is right in splash area og trailer tire and general road spray. Had to wrap seam of connector to housing with electrical tape. 306996


Comments

Everything is good

Craig - 10/17/2017

29342

- A45CB
by:

Items arrived as described. Good quality, price and fast delivery made this purchase an overall great deal. The lights and the cables I haven’t test them, waiting for my truck replacement bumper to arrive in September and have the body shop install them for me. I will update my review, but for now I recommend this products and the seller. 286064


Comments

After a year using this product function-ability still performing as described. I recommend this product and seller.

nyfb4u2 - 08/21/2017

27414

- A45CB
by:

Fit the BUL72CB led light well. Provided a nice lead to wire up the light. 266095



- A45CB
by:

Works perfectly. 254680


Comments

Great quality product.

John J - 06/02/2017

24511

- A45CB
by:

Installed in a ranch hand bumper. Used as backup lights. Works great. 247472



- A45CB
by:

As described 231722



- A45CB
by:

What a easy repair! I received back up light and replacement pigtail and finished with the installment within thirty minutes. etrailer service and products are excellent and I will not hesitate to repeat business with these guys. Their product description and installment instruction is second to none. In addition, you can not beat the price! When I get ready to upgrade to LED I will look to etrailer first to make my purchase. 228258



- A45CB
by:

This is a good high quality connector at a very reasonable price. 217673



- A45CB
by:

Good quality 175940



- A45CB
by:

Exactly what I ordered. And shipping was very fast. 171902



- A45CB
by:

I have been a heavy equipment mechanic for over 35 years. I mounted the stop , turn and tail LED lights along with the clear utility LED lights in the headache rack on my new service truck. Order was fulfilled quickly and completely, and wonderful correspondence all the way to shipment to my shop. All parts fit properly and I'm well pleased with the performance . One thing that stands out about the stop , turn and tail lights is that the tail light is perfectly lit (not too bright) so that when the turn signal is activated its super bright. This way there is a significant difference. Too many times I've seen LED lights where the tail light looks like the turn signal as far as brightness. The utility lights are far more bright than the reverse lights ,most likely due to DOT regulations. I would recommend using the utility light for cargo space. 166721



- A45CB
by:

Just the ticket for adding a MUCH better LED backup light on my truck 160818



- A45CB
by:

everything worked perfectly, and great assistance with getting the right part,thank you 146204



- A45CB
by:

Good Quality at a great price! 129574



- A45CB
by:

Very good even came with grease in plug 126397



- A45CB
by:

Parts were exactly what we needed. Shopping was easy. Recieved order quickly. 116994



- A45CB
by:

A no brainer, they worked perfect! 102526


Comments

I used these to hookup some new LED Backup Lights. It is great having a Utility Trailer that the lights work on every time, no matter how long it sits up between uses.

Ken M - 10/05/2014

7146

- A45CB
by:

Excellent product. I'll be ordering again next time I need. 69433



- A45CB
by:

As always super nice people to deal with - items shipped promptly -excellent service and products Thanks again 69133



- A45CB
by:

Very good service, good products. 67115



- A45CB
by:

The plug was a bit to small to fit the lights just right, (the tabs that slide into the light), but it works just fine. 64504



- A45CB
by:

ALWAYS VERY FAST SERVICE AND GREAT PRODUCTS AT A VERY FAIR PRICE. THANKS 32399



- A45CB
by:

The pigtail is excellent quality. Heavy duty construction and fit the light assembly perfectly. The shipping was extremely quick, and the price just right. Would recommend etrailer.com highly. 30587



- A45CB
by:

very cheap and worked perfect! great customer service too. im a customer for life with etrailer. 30428



- A45CB
by:

Turns out we did not need these - new lights plugged right in with old wires. But it was great to have them available. 29619



- A45CB
by:

Easy connection for light to harness 11728


47
47

Ask the Experts about this Optronics Accessories and Parts

Do you have a question about this Accessories and Part?


  • Rewiring Boat Trailer for 7-Way to Use LED Lights
  • There are a number of things you will need if you want to re-wire your boat trailer to use LED lights and you should start with the Epicord 7-Way Molded Trailer Plug with Junction Box # 277-000141. Keep in mind you will also need Ring Terminals # 44-5310A and Loom Clamps # A0500 The box is color coded like this: - White (ground): 10 gauge - Black (12V power): 10 gauge - Yellow (reverse/auxiliary): 14 gauge - Red (left turn and stop): 14 gauge - Green (tail and running lights):...
    view full answer...

  • Comparing Brightness Ratings of Optronics LED Tail Lights
  • The Optronics LED Backup Light # BUL22CB is brighter than backup light # BUL10CB although I would not describe it as significant, though that can be subjective. Optronics measures the brightness of their lights using candelas and the # BUL10CB has a candela rating of 125, while the # BUL22CB has a candela rating of 160. There is also the backup light # BUL52CB which has a candela rating of 175. The reason I would not classify the brightness as significantly higher is because these...
    view full answer...

  • What is the Candela Output of Optronics 6-1/2 Inch Incandescent and LED Tail Lights?
  • I do recommend you move to LED lights as they are going to last much longer than the incandescent lights on your horse trailer. As far as light output, Optronics generally measures their lights in candelas instead of lumens though at a distance of 1 foot candela is equal to lumens so you should have a good idea of how bright the lights are. I contacted Optronics and the representative was able to give me the candelas of each of the lights you were asking about. The incandescent # BU70CB...
    view full answer...

  • Plugs Needed for the Fusion LED Trailer Tail Light # STL211RCB
  • At first I thought that this light had 2 places for the 3 terminal plugs but if you check out the attached picture of the Fusion LED Trailer Tail Light # STL211RCB you can see that one plug has 3 prongs (for tail light functions) and one plug has 2 prongs (for reverse light function). If you are just needing standard plugs then you would use part # A45CB for the 2 prongs and part # A45PB for the 3 prongs. These are also available at right angles with parts # A49PB and # A47PB respectively.
    view full answer...

  • Installing Reverse Lights on Trailer Using 7-Way Connector and Wishbone 4-Way Wiring Harness
  • Using the Mighty Cord Wishbone 4-Way Flat Trailer Connector - Trailer End - 25' # A10-4225VP will give you the wiring for the tail lights on each side of your trailer giving you both the running light for each side and then the stop/turn function for each side. The ground wire will connect to your trailer frame on a bare metal to metal surface. Then when using the Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable - Trailer End - 10' Long # A10-7W10 or similar based on length,...
    view full answer...

  • Recommended Rubber Mounted 2 Inch White LED Light for Reverse Lamp
  • If you are looking for an oval shape, we have the GloLight LED Backup Light for Truck or Trailer - Submersible - 22 Diodes - Oval - Clear Lens - Qty 1 # BUL111CB which is rubber mounted using # A70GB. This light requires pigtail # A45CB or 90 degree # A49PB. If you are looking for a round light, I recommend the 2 inch # UCL50CB. This will use the same pigtail, but will use grommet # A54GB.
    view full answer...

  • Flush Mount, Submersible LED Back Up Light Recommendation for a Trailer
  • The brightest LED light, flush mount, submersible, that can be used as a back up light, is going to be the round light # BUL23C24B. But this is a 24 volt light and it has 27 diodes. For a 12 volt back up light that is flush mount and submersible would be # BUL10CB or # BUL11CB. For the BUL10CB that you have referenced, you will also need grommet # a70gb, and a wiring harness # A49PB. For the round light # BUL11CB, you would need grommet # A45GB. and harness # A45CB.
    view full answer...

  • Mounting Grommet, Bracket and Plug for Light Guide LED Backup Light BUL602CB
  • Yes, we do have a mounting bracket and plug for the Light Guide LED Backup Light # BUL602CB. This light can use rubber grommet # A70GB along with metal bracket # BK70BB for mounting. For wiring you can use pigtail plug # A45CB. I called Optronics to confirm the number of diodes and it is indeed 12; but four of them are located behind the narrow center band in the middle of the light.
    view full answer...

  • Recommended 6 Inch Oval LED Backup Light For Brightness
  • We have 6-1/2 inch oval LED lights that are very bright, that are typically referred to as 6 inch lights in the trailer industry. I recommend the Optronics GloLight LED Backup Light for Truck or Trailer - Submersible - 22 Diodes, # BUL111CB, because it is a very bright replacement light that that meets the DOT compliant standards. They have a very clean look and are sonically sealed so they can handle all the weather thrown at them. They require a recessed mount # a70gb, and a 2-prong...
    view full answer...

  • Wiring Scheme for Optronics Stop-Tail-Turn-Backup Trailer Tail Light # STL211RB
  • The Optronics Stop-Tail-Turn-Backup Trailer Tail Light # STL211RB that you referenced does indeed use either two 3-wire pigtail leads # A47PB (right angle) or # A45PB (straight) for connection or one of these can be substituted with # A45CB which is a two-wire plug. The linked photo shows you the single pin that carries the reverse signal according to my contact at Optronics. Please refer to the linked video for more information.
    view full answer...

  • Looking for Way to Mount Optronics Backup Light # BUL10CB on Ranger Trail Boat Trailer
  • In order to mount the Optronics Backup Light, # BUL10CB, on your Ranger Trail Boat Trailer, I recommend using the Rubber Grommet, # a70gb, and Trailer Light Mounting Bracket, # BK70BB. A wiring harness, part # A49PB for a right angle plug and part # A45CB for a straight plug, will also be needed for the Optronics Backup Light, # BUL10CB. I have included a few short videos for you to check out.
    view full answer...

  • Replacement Clear 6-1/2 inch Long Clear Trailer Light
  • Sounds like you have something like the part # BU70CB or the # BUL22CB as they are both 6-1/2 inch long 2-1/4 inch wide clear lights that mount in a grommet and use a 3 prong style connector like part # A45CB.
    view full answer...

  • What is the Brightest 12 Volt Fully Submersible Backup Light Available
  • If you are looking for a round backup light then I recommend part # BUL53CB but if you are looking for an oval backup light then I recommend part # BUL52CB. Both of these backup lights are completely submersible. The round light has 36 diodes with a 275 candella rating and the oval light has 36 diodes with a 175 candella rating therefore the round light will be a bit brighter than the oval light. In order to mount the round light you will also need part # A45GB or part # A70GB for the...
    view full answer...

  • How to Provide Power to Trailer Reverse Lights
  • To connect back up lights you need to have a 7-way trailer connector on both your trailer and tow vehicle. On a 7-way the reverse lights are powered by the center pin. To connect reverse lights to the trailer's 7-way you can use 16 gauge wire # 16-1-1, or 14 gauge # DW07550-1 if you have a longer trailer. Both are sold by the foot. If you need reverse lights a couple of popular options are the Optronics LED Backup Light # BUL10CB for an LED that uses a 2-wire pigtail # A45CB to connect....
    view full answer...

  • Which Trailer Wiring Connector Has a Pin for Reverse Lights
  • In order to add reverse lights to a trailer would would need to have a 7-Way on the trailer, like # 50-67-008, and a 7-Way on the vehicle. On the vehicle side, if you are looking at the back of the 7-Way where the wires connect, the reverse light circuit is the center pin. It will need to connect to a reverse light wire behind one of the vehicle tail lights. On the trailer side the matching pin is again the center pin. So from that pin, you would route wire to reverse lights. Reverse...
    view full answer...

  • LED Trailer Tail Light Installation Instructions and Wiring Diagram # STL211RB
  • If you have existing trailer light wiring, it is not necessary to run additional wiring from your new LED light to your 7-way connector. You can splice into the wiring that feeds your current lights but will need the following pigtail leads. You will need a right angle # A47PB or a straight # A45PB 3-wire pigtail lead and a 2-wire pigtail # A45CB to install the Optronics Stop-Tail-Turn-Backup Trailer Tail Light # STL211RB. (The 2-wire pigtail can be replaced with a standard 3-wire...
    view full answer...

  • Is the LED Oval Trailer Utility Light Brighter than the Incandescent Oval Trailer Back Up Light
  • I went out to the warehouse and checked all of our clear oval lights. The Sealed, 6-1/2 inch LED Clear Oval Trailer Utility Light, 10 Diode, item # BUL72CB, whiter light than the light emitted by the incandescent Oval Trailer Back Up Light, item # BU70CB, but the light does not illuminate as large an area as well. The advantages of the LED light is that it does not draw near as much amperage as the incandescent light, it lasts much longer and it does not produce the heat produced by incandescent...
    view full answer...

  • Does the LED Trailer Backup Light # BUL11CBX Require a 2 or 3-Prong Harness
  • At first glance the picture does imply that it needs a 3-prong plug, but if you look closely there are only wires coming from two of the terminals. And the 2-prong plug like part # A45CB will fit in this setup as the two prongs of the pigtail will line up with the 2 wires of the # BUL11CBX. If you check out the picture I attached you can see how the two products would work together.
    view full answer...

  • Wiring a Wells Cargo Trailer with a 5-Way Flat Connector and Reverse Lights
  • You would need to add a 5-Way flat trailer connector, # HM47910. Cut off the plug from your old 4-Way trailer connector and then attach the wires to the new 5-Way. On a 5-Way, trailer side, the covered plug is ground, next to that is the running light wire. Next to that will be the left turn/brake light wire. Second to last is the right turn/brake light wire. And at the far end is the wire you will be using for reverse lights. You will need to run wire from the blue wire on the 5-Way...
    view full answer...

  • Oval LED Reverse Lights with Grommet for Flatbed Trailer
  • We have exactly what you are looking for in terms of an LED reverse light that fits with a grommet for your flatbed trailer. The Optronics LED Backup Light for Truck or Trailer - 6 Diodes # BUL12CB or the same light with 10 Diodes # BUL10CB can be mounted to your trailer with PVC Grommet for 6-1/2" Oval Trailer Tail Lights # A70GB and you will just need a 2-wire pigtail for the lights. For this you can use 2-Wire Pigtail # A45CB or Right Angle 2-Wire Pigtail # A49PB. I have added links...
    view full answer...

  • Tips for Installing 6-1/2 Inch Oval Trailer Lights and Grommet in Trailer Frame
  • PVC Grommet # a70gb and the lights that fit with them have to have a tight fit in the trailer. Try to press them into the hole as evenly on both sides as possible. Using some soapy water on the grommet and trailer will help it to install easier. If your trailer takes the same size backup lights you can use # BUL002CB with wiring # A45CB which also fits that same grommet.
    view full answer...

  • Need Bright Backup Light on Boat Trailer for Nighttime Use
  • We do offer a super-bright LED-type backup light that is fully submersible, part # BUL52CB from Optronics. This 36-LED light uses a 2-wire pigtail # A45CB for connection and can be mounted using rubber grommet # a70gb along with steel bracket # BK70BB. LED lighting combines high-efficiency with high light output and this unit should serve you well without placing much additional load on your trailer wiring.
    view full answer...

  • Wiring Harness, Grommet and Bracket for Backup Light for Truck or Trailer BUL52CB
  • Backup light # BUL52CB does have a 3-prong receptacle but will accept a 2-prong pigtail harness (not included) # A45CB. The grommet is not included but the one you would need is # a70gb. You can mount the lights using the grommet and cutting a hole in the trailer surface or you could mount them with the grommet in bracket # BK70BB.
    view full answer...

  • Wire Color Codes for Optronics 3 Wire Taillight Wiring Pigtail
  • On a three wire pigtail that's being used on a stop/turn/taillight, the red wire carries the brake/turn signal circuit, the black wire carries the running lamp circuit and the white wire provides the ground connection. The # BUL53CB lamp you mentioned is a single function lamp only, for that particular lamp, you'd use a 2 wire pigtail, like part # A45CB. On the 2 wire pigtail, red carries the power to the lamp, the white wire is the ground connection.
    view full answer...

  • Wire Pigtail for Optronics 4 Inch Round LED Trailer Reverse Light
  • Although the rear of the lamp features three pins, only two of them are active which is why the 2-prong pigtail is called for (see photo). My guess is rather than design a separate back for lights that only need the 2 pin pigtail, Optronics finds it more cost effective to use a single back for all their 4 inch round lights.
    view full answer...

  • 4-Inch Round White LED Work Light to Fit Rubber Grommet A45GB
  • Optronics round light grommet # A45GB fits a 4-1/2-inch cutout and accepts a 4-inch round light such as # BUL43CB. This round white LED-type work light features 10 super diodes for bright high-efficiency lighting. This light is intended as a work light; it is not certified for use as a backup light. For a 2-wire pigtail lead you can use part # A45CB. Thanks to the high-efficiency of this LED light you can use multiple lights without causing the same power draw demanded by incandescent...
    view full answer...

  • Are LED Lights with More Diodes Brighter and Can a Trailer Backup Light be Used on a Truck
  • It is pretty safe to assume that the more diodes in an LED light the brighter it will be. The only time that is not necessarily true is if one light has large diodes and the other doesn't. But any way you slice it light # BUL53CB and its 36 diodes is going to be bright. In this case, for all intents and purposes, a 4-5/16 inch and 4-1/4 inch diameter won't make a difference. The light can be used on your truck. In fact a lot of people use lights like this and other trailer lights...
    view full answer...

  • Can Peterson Round Flush Mount Trailer Light be Installed in 1/8 Inch Thick Diamond Plate
  • Yes you can install red flush mount light # 435800 in diamond plate. The grommet will hold the light in place by compression. For a similar backup light you can use # BU45CB with grommet # A45GB and wiring harness # A45CB.
    view full answer...

  • Looking for 6-1/2 Inch Oval LED Trailer Light to Use for Back Up Light
  • We do indeed have a 6-1/2 inch oval LED lamp that is DOT certified for use as a backup light. The part # is BUL22CB. A utility light like the one you referenced, part # BUL78CB is not DOT compliant because the clear lens allows the light to be bright enough to be blinding. A wiring pigtail, part # A45CB and grommet, part # A70GB will also be needed.
    view full answer...

  • What Pigtails Are Needed For Optronics Submersible LED Trailer Tail Light With Backup Lights
  • You are correct that you will need two pigtails for this light. I spoke with my contact at Optronics about the Trailer tail Light, part STL211RB. One plug is to be used with a 3-wire pigtail like part # A47PB for the right angle plug or the straight 3-wire pigtail part # A45PB. The other plug will use a 2-wire pigtail like part # A45CB, which will be used for the back-up lights only.
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Amy B
Photos by:
Stacy F
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.