Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 18" long. Designed specifically for side marker, clearance, and utility lights.
Features:
Pigtail is a direct replacement for:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a two wire pigtail for Optronics trailer lights. This pigtail, with the two pronged plug, allows you to wire your trailer light to your trailer. It's designed for use with Optronics side markers, clearance, and utility lights. And it can be used for other trailer light brands as well. It features the male pin, two prong PL-10 molded plug. This connects to the back of the trailer light.And this is a two wire pigtail, so it has a two wire design.
The white wire is for ground, and it does come with a number 10 ring terminal already installed for easy connecting. And then the black wire's for power. The wires come off the plug at an angle, so you'll notice that they drop straight down, instead of coming straight off the back, or straight out. This really helps reduce the amount of strain placed on the wires. And the wire length is 18 inches long.
It's really easy to connect. This is the type of connection that it mates with. And you place it directly in the connection points. Push it in until it seats all the way. And that's all there is to it.
That's going to do it for the today's look at the two wire pigtail for Optronics trailer lights.
Worked great
very cheap and worked perfect! great customer service too. im a customer for life with etrailer.
I ordered this pigtail along with a replacement light and grommet after a tire blew out on my EZ Loader trailer and the flying rubber knocked the original light and grommet out into traffic where they were promptly crushed. It turns out I didn't need the pigtail because the old one still worked, but for as little as this cost I did not want to take the chance of not having the right parts to fix the light. Now I have an extra pigtail, just in case.
Although Taiwanese made, they appear to be a quality pigtail, which I'm thankful for since I will be rewiring a whole flatbed marker light system.
These came with plenty of length for a perfect fit. Thanks!
Was what I needed for my ezload trailer 2010 skeeter zx190
works great for my trailer
Pefect product for my boat trailer rewire project. fast shipping
Great job . Thank you .
I recently had a tire blow out on my boat trailer and it took out the wiring for the fender-mounted marker lights. I spliced these two-pronged plugs into my existing wiring harness and they work great. They take up very little space and fit through the mounting holes on the trailer with no additional inletting needed.
Easy to install were plug and play for my trailer. Only thing is not including the watertight connections for the splice maybe consider that in the future when the pig tails are bought. Most people do not have those type connectors and are sometimes hard to find.
Worked perfect for my application. Easy to solder and fit my existing lights.
etrailer.com is great. I could not find what I was looking for any where on the web. Tired of looking, and wanting one stop shopping, I went to etrailer.com. I was unsure if what I was ordering would work for my application so I called etrailer. Bradly was a big help. He took my order and got everything shipped that day. Everything was exactly what I needed and as it was described. etrailer is now my first choice for trailer parts.
Works as intended. Easy to install with basic tools. Used for rewiring some lighting on an enclosed cargo trailer.
etrailer has everything I needed to change all my trailer lights out and shipped them out quick. Lights were easy to install and very bright. Not one issue so far with them after a year. Way better than the standard halogen trailer lights.
parts ordered where as stated and quick delivery for my shorelander trailer marker lights and harness
I purchased parts I needed to rewire my boat trailer from etrailer recently and I couldn’t be happier. Both orders arrived in a few days and were 100% correct. The parts I needed, though for an older boat, were matched exactly and my work on my trailer is done perfectly.
It’s nice to know this kind of service and company is around to help DIY’s!
I used this to replace a damaged trailer light connector. It was an exact fit.
I installed these a year ago and they are still working fine. Replacing the light assemblies with LED probably reduced the draw that led to the demise of the old sockets but these are high quality replacements.
I used this pigtail in correcting a ground problem in a horse trailer. It's a quality product. The long pigtails are greatly appreciated.
George at etrailer supplied all of the parts to rewire and change all of my trailer lights to LED. The prices are good and the service is great. No problems and will use again for any of my lighting or towing needs.
Rick N. California
Parts were easy to find on the website, prices were competitive and everything arrived within a few days - exactly as it should happen. I will use etrailer for all of my future trailer lighting needs.
These marker lights are great and easily mounted and wired into my Shorelander trailer.
Great price on tire and wheel combo, ordered LED lights also but haven't installed them yet. Placed my order on Sunday night, shipped out Monday morning received shipment Wednesday morning, great job.Randy
Excellent service and exactly the right parts for my motorhome. Really appreciate etrailer's timely follow-up. Will definitely use again.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Easy M.
10/23/2017
Still doing good - no problems