Is there a Grommet for the GloLight LED Trailer Tail Light STL1211RCFHPG?
Updated 06/14/2026 | Published 06/10/2026 >
Products Featured in This Question
Question:
Does this light come in a rubber gromit style Part Number: STL1211RCFHPG
asked by: Todd W
Expert Reply:
Hey Todd, welcome back. The GloLight LED Trailer Tail Light item # STL1211RCFHPG doesn't have a rubber grommet because it's a flush mount with a trim ring. The Fusion LED Trailer Tail Light item # STL211RCB is a recessed light that is nearly identical though that does.
The Fusion LED Trailer Tail Light item # STL211RCB measures 6-7/16" long x 2-5/16" tall x 1-1/2" deep. You will need the PVC Grommet item # a70gb to fit into a recessed cutout.
Both the recessed light item # STL211RCB and flush mount light item # STL1211RCFHPG use the same connectors. You can use the 3-Wire Pigtail item # A45PB for the running light, turn signal/brake light and ground while the 2-Wire Pigtail item # A45CB is used for the reverse light if you do not already have these connections.
What kind of trailer do you have and do you need a flush mount or a recessed mount light?
You can add this information, along with any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
GloLight LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - 22 Diodes - Clear Lens
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn/Backup
- Oval
- Surface Mount
- Submersible Lights
- LED Light
- 7-1/2L x 3-1/4W Inch
- Red
- White
- Optronics
more information >
Continue Researching
- Video: Let’s Check Out the Buyers Products Recessed Chain Tie-Down for Trailers
- Search Results: safety chain
- Shop: GloLight LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - 22 Diodes - Clear Lens
- Shop: PVC Grommet for 6-1/2" Oval Trailer Tail Lights
- Q&A: Does Optronics GloLight LED Trailer Tail Light Include the Grommet?
- Shop: Buyers Products Recessed Chain Tie-Down for Trailers - Carbon Steel - 6,600 lbs
- Q&A: Is Optronics GloLamp LED Trailer Lamp STL1211RCFHPG Sold Individually or in Pairs
- Q&A: What Torklift Tie Downs Fit a 2022 Ford F350 with a 6.5ft Bed?
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Q&A: Option For Adding Lights To A 1up USA Bike Rack
- Q&A: Does Fusion LED Trailer Tail Light Need a Separate Brake Light and Turn Light Wire?
- Q&A: How To Use GloLight LED Trailer Stop Turn Tail Reverse Light w/ Separate Wiring
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Rooftop Cargo Carriers
- Article: Trailer Lighting Requirements
- Article: 5 Things to Know About Weight Distribution Hitches




Todd W.
6/11/2026
Ya I see the difference but I kind of wanted the GLO light led, not just the led style , do you know if there going to make that glo light led in a rubber grout,