Replacement Motor for 1RV-200 Landing Gear Motor on 2005 NuWa Hitchhiker 5th Wheel

Question

Question:

Began to whine, and turn slower and slower then quit. This is all I have for identification DC-MOTOR SPECIFICATION OF HE FIFTH WHEEL RATED DR 12V 30A E226168 PROTECT WITH 30A FUSE AND SLIP CLUTCH PART NO. 1RV-200 SER. NO. THE FIFTH WHEEL 10073807

asked by: Deb

0

Expert Reply:

Based on your description it sounds like you need a replacement motor for your landing gear. The correct replacement for your 1RV-200 is the # LC142178. If you need a replacement gear box as well then you can use the # LC276602.

expert reply by: Robin H

0

Dawn

6/17/2025

Is it the same part if only the serial # is different?

Robin H.

6/18/2025

@Dawn as long as the part number on it is 1RV-200.

Answer 1

Hello Jerry, thanks for reaching out. I am sorry to say we do not offer a replacement rod and nut for the Lippert Ground Control 3.0 jacks. The only solution I can offer would be a whole new leg such as part #LC362485 which replaced the front jack…

view full answer...

Answer 2

For your Venture landing gear you can use #LC276602 or #LG-179015. Either one will work.

view full answer...

Answer 3

Hey Johnny, thanks for reaching out! I highly recommend using the Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor #LC196308 as a replacement for your 8532-07 motor. According to my research your motor is rated for 5,500 lbs so this motor will…

view full answer...

Answer 4

If the brand of landing gear you have now on your Keystone Laredo is a Ram brand then yes you could reuse it's motor with the #RVLG-8HDL. But most likely you have a Lippert set of landing gear based on what typically they used so instead the part…

view full answer...

Answer 5

It seems like you have the ADTH 1RV-200 Motor which has a capacity of 6,500 lbs. You can use this replacement motor #LC142178 which has a 4" on center mounting hole spacing. This one is a bit heavier duty than your other which could prevent it…

view full answer...

Answer 6

That is a Venture/ADTH motor and gear box, and what you use to replace it is a motor and gear box from Stromberg Carlson, which are the following part numbers: - Replacement Motor #LG-142178 - Replacement Aluminum Gearbox #LG-179015

view full answer...

Answer 7

If the bevel gears/gearbox for the dual-motor landing gear on your 2011 Keystone Laredo 266RL 5th wheel were badly worn or damaged you would most likely be able to hear it. These conditions typically cause a good bit of noise as the jacks try to…

view full answer...

Answer 8

Thanks for the picture! We sure do! You will want the Replacement Motor for Stromberg Carlson Electric Landing Gear item #LG-142178.

view full answer...

Answer 9

There is a heavier-duty option to replace the Venture M-9000-PK landing gear motor than the 5,000 lb capacity Lippert Venture 5th Wheel RV Landing Gear Motor #LC142178. While that is the correct fit, if you want a higher rated capacity you can…

view full answer...

Answer 10

The Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893 is just the motor but if you need to replace the gearbox as well you can do so with part #LC276602.

view full answer...

Answer 11

Hey Dave, the correct gear box to replace a Venture VMC940RB is the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies #LC276602.

view full answer...

Answer 12

A follow leg cannot be converted to a lead leg with the repair kit; and the only difference between the Lippert Venture 5th Wheel RV Landing Gear Motor #LC142178 and Replacement Motor for Stromberg Carlson Electric Landing Gear #LG-142178 is…

view full answer...

Replacement Motor for 1RV-200 Landing Gear Motor on 2005 NuWa Hitchhiker 5th Wheel

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching