You're loaded up after dark and rolling out. This light handles the signaling when and where it matters. It's wired in, sealed tight, and built to take the rough roads, water, and bumps along the way. Great Prices for the best trailer lights from TecNiq. TecNiq Contoured Seven Function Box Style Tail Light - Passenger Side part number TN62XR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Reviews (106)
Q & A (0)
Related Parts
Photos
TecNiq Trailer Lights
Tail Lights
Rectangle
LED Light
Red
Brake/Tail/Turn
Marker
7-1/2L x 3-1/2W Inch
Submersible Lights
Surface Mount
TecNiq
You're loaded up after dark and rolling out. This light handles the signaling when and where it matters. It's wired in, sealed tight, and built to take the rough roads, water, and bumps along the way.
Highlights
Seven Functions in One: Covers everything you expect from a full rear trailer light, plus a few extras.
Clean Passenger-Side Fit: Matches the driver-side light without the license plate window.
Sealed for Marine Use: Waterproof, dustproof housing is fully submersible and IP68 rated.
Long-Term LED Performance: Bright, efficient LEDs rated for 100,000 hours of use.
Ready for Rough Roads: Hard plastic housing and lens resist cracks, chips, and impact damage.
DOT Compliant Design: Meets FMVSS 108 for both narrow and wide vehicle applications.
Specs
Dimensions:
Overall dimensions: 7-1/2" long x 3-1/2" tall x 3" deep
Light Output:
Functions: stop, tail, turn, side marker, side reflector, rear clearance, rear reflector
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm
Customers Who Purchased This Trailer Lights Also Bought...
Hey Mike! Wesbar has been gone for a while which is why you're having trouble finding their lights. I believe the TecNiq Contoured Eight Function Box Style Tail Light # TN62XR (Passenger Side) and # TN42XR (Drivers Side) share the same design and dimensions.
These measure 7-1/2" long x 3-1/2" tall x 3" deep with mounting holes 2" apart on center so I would compare that to the Wesbar you have now. You will also need # TN47PV for installation.
The one thing they do not have is the side... view full answer...
Hey Ken, welcome back! We do sell replacement LED tail lights for your EZ Loader boat trailer. A lot of their trailers use the TecNiq Contoured Eight Function Box Style Tail Light # TN42XR (Drivers Side) and # TN62XR (Passenger Side). These measure 7-1/2" long x 3-1/2" tall x 3" deep so I would check that against what you have now just to be sure. If you have a different style light let me know and I'll see what else is available.
What kind of boat are you hauling? view full answer...
Hi Jim!
The Wesbar Wrap Around Lenses were discontinued quite a while ago, so unfortunately, we do not have any left in stock. I did a lot of searching around the web, but I was unable to find anywhere that still carries them. You may be able to find one at a local trailer supply store, but I would definitely call before venturing out to see. Gas is expensive these days!
The best thing we can offer would be a full replacement. I included two options that would be the most similar to your... view full answer...
Hello John, thanks for reaching out. Yes, the mounting holes on the TecNiq Contoured Seven Function Box Style Tail Light # TN42XR (driver side) and # TN62XR (passenger side) are exactly the same as the Wesbar 271595 tail light. They are 2" apart on center. I believe this TecNiq light was created with those Wesbar wraparound lights in mind because they were super popular back in the day and for a long time nobody else made a suitable replacement.
What kind of trailer are they going on? view full answer...
No, it is not plug and play Paul but it can be. The TecNiq Contoured Seven Function Box Style Tail Light item # TN62XR passenger side and item # TN42XR driver's side use a 3-Prong PL-3 Plug like item # TN47PV. These lights measure 7-1/2" long x 3-1/2" tall x 3" deep and are commonly used to replace the old discontinued Wesbar 271594 and 271595 lights. You could easily splice the item # TN47PV harness into your existing wiring to make this a plug and play connection.
The older Wesbar 271594... view full answer...
Hi Johnny! The Wesbar 271595 and 271594 were discontinued a while ago and are no longer available. The best option at this point is to replace them with another brand with similar dimensions. The original light is approximately 7-1/2" long x 3-1/2" tall x 3-1/4" deep with mounting holes 2" apart on center.
For a replacement, I recommend the TecNiq Contoured Eight Function Box Style Tail Light # TN42XR (driver side) and # TN62XR (passenger side). These measure 7-1/2" long x 3-1/2" tall... view full answer...
Hey Bill! If you're switching from incandescent to LED lights like the # TN42XR it is best to convert everything to LED. However, it is possible to mix them and have it work. Sometimes it works, sometimes it doesn't, there isn't a particular rhyme or reason behind it it just depends on the trailer.
It looks like you already picked up this light and the passenger side # TN62XR. You can go ahead and install them and then test to see if everything works correctly. If you run into issues... view full answer...
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.