Availability of Replacement LED Tail Light for EZ Loader Boat Trailer

Updated 08/03/2026 | Published 08/01/2026

Products Featured in This Question

TecNiq Contoured Eight Function Box Style Tail Light - Drivers Side

(110)

$24.67

TecNiq 12" 3-Pole - 0.156" Bullet Harness w/ #6 Ground Lug - 90 Degree - 18-Ga Wire.

(12)

$7.18

TecNiq Contoured Seven Function Box Style Tail Light - Passenger Side

(110)

$21.83

Question:

Do you sell a replacement led tailight for EzLoader boat trailers?

asked by: Ken W

Expert Reply:

Hey Ken, welcome back! We do sell replacement LED tail lights for your EZ Loader boat trailer. A lot of their trailers use the TecNiq Contoured Eight Function Box Style Tail Light # TN42XR (Drivers Side) and # TN62XR (Passenger Side). These measure 7-1/2" long x 3-1/2" tall x 3" deep so I would check that against what you have now just to be sure. If you have a different style light let me know and I'll see what else is available.

What kind of boat are you hauling?

expert reply by: Robin H

TecNiq Contoured Box Style Tail Light
(click to enlarge)

Ken W.

8/3/2026

Robin. Thanks for the rapid response. It looks like these will fit my trailer. I noticed one customer commented on the need for a wiring pigtail to connect the driver’s side light. Is this correct? Also, in answer to your question, I have a 20’ Boulton heavy aluminum boat; Sentinal model. Ken

Robin H.

8/3/2026

@KenW nice boat! And yes, if you don't already have the connector on your existing lights you will need a PL-3 like # TN47PV. If the trailer is older it's probably a good idea to replace that anyway since the wiring tends to wear out over time.

Ken W.

8/3/2026

@RobinH thanks!