Optronics Low Profile LED RV Tail Light - Stop, Tail, Turn - 6 Diodes - Red Lens - Passenger Side

Video Transcript for Optronics Trailer Lights - Tail Lights - RVSTL20 Review

Speaker 1: Today we're taking a look at the Optronics Low Profile LED RV Tail Light for the passenger side. The passenger side combination light provides brake, turn and tail light signals for your trailer. It features long lasting LED's that are great replacements for incandescent lights. LED's last longer, burn brighter and they're much more efficient. You don't have to worry about replacing bulbs or worry about brittle filaments. And this is a nice low profile arched oblong design.

Gives it a really nice clean look.It's a surface mounted installation. There's a total of four mount holes, mounting hardware not included. To gain access to the mount holes, you just need to pop off the lens and then you'll be able to gain access and install your hardware. This lens does feature the built-in reflex reflectors. That eliminates the need for a separate reflector.

That's an acrylic construction. Very strong and durable, and it's got the nice plastic housing or base for a nice strong design.It's a three wire design, so you have white, black and red wires. White is ground. Black is power. Red is for the stop and turn signal.

We'll take a look at the dimensions real quick, and then we'll be able to hook it up to power. So, the overall length, measuring edge to edge this direction. You see that measures about seven a half inches long. Overall height from top to bottom measures about three and eleven-sixteenths to three and three-quarter inches. And then the thickness, or the depth, it's only about one and five-sixteenths of an inch thick.Now the mount holes, side to side, these are separated on center by four and five-sixteenths of an inch.

Up and down, by two and three-quarter inches. This light contains a total of six diodes. We're going to go and hook it up to power. That was you can see what it looks like with power running to it. Again, white wire is our ground wire. Black wire is our power wire, and then red is our stop and turn signal.So, we'll run through the cycle with the lights on, our overhead lights on. This is the tail light function. When we apply the brake, the signal output increases and it'll do that same thing for the turn signal. We'll do that with the overhead lights turned off. There's our tail lights, brake and turn.That's going to do it for today's look at the Optronics Low Profile LED RV Tail Light for the passenger side.