To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Sturdy, secure fifth-wheel trailer hitch has a dual-pivot head and a slide-bar jaw for a smooth ride. Non-binding slider ensures proper clearance during slow turns. Rails and installation kit included.
Features:
Specs:
With a dual-pivoting head that offers 10 degrees of lateral movement, the E16 fifth-wheel hitch makes hookup a snap, even on unlevel ground. Once the king pin slides into the hitch, the auto-locking, slide-bar jaw secures it in place. A unique feature of the E16 is the rear steel tension bar within the jaw that activates upon hookup to clamp down on the king pin, providing a tighter grip that maximizes security and minimizes rattle.
Specially designed for trucks with 6' to 8' beds, this non-binding slider helps to eliminate clearance problems during slow-speed turns. When you are towing a fifth-wheel trailer, your hitch must be situated on the cab side of your truck's rear axle. However, at slow speeds you can use a slider to slide the fifth-wheel hitch (and the trailer) toward your truck's tailgate and past the rear axle, creating enough space between the cab of your truck and the trailer to permit less-restricted turning.
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys, this is Jake here with etrailer. Today we're gonna be going over the CURT E16 replacement 5th wheel head. This is designed to replace your E16 5th wheel head. If you've already got one and you're wanting to replace it. If it got damage or if it's old and rusty this is gonna be a perfect fit. It's also gonna come with the replacement bracket.
If you'd like to swap out the head on the S20 which is their new slider base, you can put this in, mount it to the correct height and then put this hitch head right in the top of it. You are gonna get all the replacement parts that initially come with the kit so you'll get new hardware, new pins, a new handle, and this bracket. The best way to get this set up inside the S20 base is to set your head height with the bracket first and then set the head on top of it. Now with our new hardware, we can set the height of our hitch a lot easier than a lot of other hitches out there. A lot of 'em are gonna have to set it with the head attached but this bracket only weighs about 10 pounds so it's really easy to get it in place.
Now to get your new head in place, it's as simple as setting it on top of the bracket. And again, it will come with two new pins. And that's, I think that's kind of nice 'cause when you're replacing you know, new parts you'd like to put new hardware in too 'cause chances are these are gonna be pretty wore out. So some of the reasons why you would need to replace your 5th wheel head is if it's got a lot of rust on it it's gonna start to affect the integrity of the strength of the hitch itself. So if it's got too much rust you might think about replacing it.
If you've not been using enough grease or any grease at all this head can start to score and once it starts scoring you can't really go back 'cause it needs a smooth surface to slide on your kingpin base. Another reason is your grease gets dirty that can cause scoring. If you're not using a lube plate. There's a lot of different reasons of why you would need to replace this head. If your mechanism isn't working correctly anymore.
But it's good to know that you can just replace the head. But with that being said, a lot of people what they'll do is they'll, if they have an A16 or an E16 head and they have the traditional base but they get a new vehicle and they'd like to switch to the slider, you can keep your old head, get the slider, and then later on you can replace the head. So there's several different options and reasons of why you would need a new E16 head. Well, with all that being said, we've got it all installed it's ready to go, and it's ready for our next trip.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.