Menu Icon
summer hauling headquarters

Chevrolet Tahoe Towing Mirrors

Select Chevrolet Tahoe Year

  
Towing Mirrors


Available Years for Chevrolet Tahoe Towing Mirrors


Towing Mirrors

Need to extend your line of vision while towing? We offer custom-fit towing mirrors for many vehicles with a simple slip-on installation by CIPA, K Source, Longview and Original Custom Towing Mirrors. The extended mirrors offer the additional reach you need to view those hard-to-see areas on the rear and side of your trailer. Or, add a pair of OEM replacement extendable mirrors and keep your vehicle riding in style when towing and driving around town.

View the complete list of custom towing mirrors and OEM extendable mirrors we offer for your vehicle by entering the year, make, and model to the left. Don't forget to add a hot spot mirror for even more visibility!




Universal Fit Mirrors



Towing Mirror Accessories



Towing Mirror Manufacturers



Chevrolet Tahoe Custom Towing Mirrors Videos

CIPA Custom Towing Mirrors Installation - 2008 Chevrolet Tahoe

Today on our 2008 Chevrolet Tahoe, we'll be installing the CIPA Custom Towing Mirror, part number CM10900. The CIPA Custom Towing Mirror is a sleek and stylish design to prevent vibrations and wind noise. It simply slides up and over the original manufacturer's mirror. Here, it has a manual mirror that can be adjusted up, down, in, or out as necessary to view your towing product. As you can see, its sturdy design won't move around even at highway speeds. Note it also does not interfere with the manufacturer's mirror, so viewing of the blinker or moving the mirror as necessary will not be obstructed. Now with our driver side installed, let's move over to the passenger side and install that one. Here we can see the grooves that will line up on the back side of the mirror and the front side simply slips into position. Then we'll take our wedge, slide it into the groove, and line up the portion here with the threaded portion of our mirror.



CIPA Custom Towing Mirrors Installation - 2013 Chevrolet Tahoe

Today, on this 2013 Chevrolet Tahoe, we're going to install part number 10902. This is CIPA's custom towing mirror for the passenger side. To start off our install, we need to get our parts ready to go. We'll have to attach two pieces of foam to our part. One will be to the wedge, which holds the mirror in place. The other will actually go on the inside edge of the mirror itself.



CIPA Custom Towing Mirrors Installation - 2013 Chevrolet Tahoe

Today on this 2014 Chevrolet Tahoe we're going to install part number 10901. This is Cipa's custom towing mirror for a driver's side. To start off our install we need to get our parts ready to go. We'll have to attach 2 pieces of foam to our part. 1 will be to a wedge which holds the mirror in place, and the other will actually go on the inside edge of the mirror itself. It's also a good idea to clean out the front of the mirror of any dirt and debris that if it's in the way before installing the mirror; that way, the paint won't get damaged by the grit.



Longview Custom Towing Mirrors Installation - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe, well be testing the Longview Slide On Original Custom Towing Mirrors, part number CTM 1600.Now to begin our test fit, well slide our new Longview mirrors onto the original manufactures mirror. Note that each mirror is designed for only one side of the vehicle.Now with the mirror on, well install the brackets. Well slide the plastic piece onto the hole at the end of the mirror with the flat rounded piece at one end. Well then slide the next long plastic piece with the hook through the hole on the L-bracket. Note when tightening the knobs before the hook is secured, tighten the knobs down just a little bit to ensure the hook can get around the mirror.Well now take the hook and put it around the manufactures existing mirror. Well then tighten down the knobs to secure the Longview mirror to the manufactures mirror.



Longview Custom Towing Mirrors Installation - 2011 Chevrolet Tahoe

Today on this 2011 Chevrolet Tahoe were going to do a test fit of part number CTM1600, a custom towing mirror from Longview. This part number comes with both sides. Were going to be working with the drivers side today. Well start off our test fit by sliding our towing mirror over to factory mirror. Make sure its fully seated around the factory mirror. Then we can go ahead and install our cache of hardware.



CIPA Custom Towing Mirrors Installation - 2011 Chevrolet Tahoe

Today on this 2011 Chevrolet Tahoe were going to do a test fit of part number 10901 from Cipa. This is their custom towing mirror for the drivers side. Well start off our test fit by sliding on the new Cipa mirror over the factory mirror and well go out three quarters of the way. Then well take our wedge and put it between the Cipa mirror and the factory mirror. Then well push the two together. Well make sure that the towing mirror is fully seated onto the original mirror, and then well go ahead and install the locking knob.








^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.