Use this 2" receiver with your OEM hitch to get a heavy-duty dual-receiver hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution. Pre-drilled for camper tie-downs.Features: Heavy-duty hitch lets you tow hefty loads, even when using a TorkLift hitch extension or weight distribution system (sold separately) Max out the 30,000-lb capacity with TorkLift's specially designed Everest weight distribution system (TLWD1000 - sold separately) Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Single-receiver cross tube installs under your OEM hitch to provide 2 receivers Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver opening: 2" x 2" 2" x 2" Adapter sleeve included for your factory 2-1/2" x 2-1/2" hitch reciever Rating: Class V Maximum gross trailer weight : 20,000 lbs Maximum GTW when used with weight distribution: 30,000 lbs Maximum tongue weight : 2,500 lbs Maximum TW when used with weight distribution: 3,000 lbs Cross tube dimensions: 4" x 4" Lifetime warranty With the SuperHitch Magnum, you get a 2" receiver for standard towing, while maintaining your factory 2-1/2" receiver for heavy-duty towing.
Swap between all your different hitch accessories with this adapter. It converts a 3" receiver into a 2-1/2" or 2" receiver. Includes pin and clip. Not for towing; use for hitch accessories only.Features: Adapts 3" hitch receiver into 2-1/2" or 2" receiver to work with your accessory Nested design: outer sleeve for 2-1/2" reciever; add inner sleeve for 2" Stays in place with tabs Includes 4" hitch pin and clip Made of heavy-duty steel with black powder coat finish Specs: Dimensions: Large tube: 6-1/4" long x 3" wide x 3" tall Smaller tube: 6-1/4" long x 2-1/2" wide x 2-1/2" tall Distance from center of hitch pin hole to front of the tubes: 2-3/4" Distance from from center of hitch pin hole to back of tubes: 3-1/2" Note: Do not use for towing.
This ball mount is designed in a unique X-shape so water can drain out of your receiver while it's installed, preventing seize up. Comes with a pin and clip.
Extend your trailer hitch receiver opening so that you can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you make sharp turns. Powder coated steel resists rust.Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your rear-mounted spare tire Sturdy, solid steel shank provides maximum strength and durability Black powder coat resists rust and corrosion Requires hitch pin and clip or hitch lock (sold separately) Specs: Application: 2" x 2" trailer hitch recievers Distance from center of hitch pin hole to center of hitch pin hole: 14" Weight capacity: Gross trailer weight: 3,500 lbs Tongue weight: 350 lbs Weight capacity when used with weight distribution: Gross trailer weight: 7,000 lbs Tongue weight: 700 lbs Note: The limiting factor is the capacity of your hitch.
Give yourself a second reciever hitch when towing a trailer or flat-towing your vehicle. Use one reciever for your trailer or dinghy and use the other one with a cargo carrier or bike rack. 10,000-lb Capacity with 400 lb tongue weight. 4" Drop.Features: Give yourself a second reciever hitch when towing a trailer or flat-towing your vehicle Use one reciever for your trailer or dinghy and use the other one with a cargo carrier or bike rack Constructed of solid steel Requires pin and clip or hitch lock (sold separately) Made in the USA Specs: Application: 2" x 2" trailer hitches Dual receivers have 2" x 2" openings Drop: 4" Rise: 4" Gross towing weight: 10,000 lbs Tongue weight: 400 lbs Limited lifetime warranty
Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.
Hey Fernando, I'd be happy to help you pick out the correct Timbren rear suspension kit for your 2023 Toyota Tacoma TRD that will be towing a trailer. Really it comes down to two options. You would want the part #TTORTUN4L for if you have the 3…
The only pintle hitch mount we carry with a 25000 lb capacity is the Super Titan Forged Pintle Hook Plate for 3" Trailer Hitches - 25,000 lbs, #RP38186. This can only be used on 3 inch by 3 inch inside opening trailer hitch receivers rated for…
Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…
If the trailer tongue in question is 3-1/2 inches round then you can use Bulldog coupler #BD028383. If you have a square or rectangular tongue then a 3-1/2 inch wide straight coupler is not available. You may be able to use a channel bracket like…
We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…
William yes, I can confirm that the Curt T-Connector Vehicle Wiring Harness #C88RV is what you'd need for your 2025 Chevrolet Equinox. If you're needing help with anything else, feel free to drop a comment before you go!
If you have a 2008 GMC Yukon XL Denali (or even a regular Yukon Denali) then you can follow the video I have linked for the 2011 Suburban. The installation process will be identical. I have also included a link to our how-to article that explains…
With a 2008 GMC Yukon, the install would be very simple for brake controller. GM includes a bundle of wires underneath the dash for a brake controller. One of our most popular brake controllers is the Tekonsha Prodigy, part #90885. To wire the…
Yes, the Curt Trailer Hitch Receiver part #C15810 which is a fit for your 2008 Ford F-350 will allow you to tow your 2000 Holiday Rambler Aluma Lite 30SKS without the use of a weight distribution system assuming the figures you provided on the…
Hello Corey, we sure do. For that you can use the Replacement Hardware Kit #RHK. When you go to the page for the RHK there will be a box where you enter the part number for your hitch. In this case you will enter the part number #C15810 before adding…
One thing to note when using a hitch extender like the etrailer, #e88YR, is that the tongue weight and towing capacity of your trailer hitch will be reduced by 50 percent due to the increased leverage that is placed on your trailer hitch from your…
Powder coated, carbon steel receiver tube bolts onto your cab and chassis truck's hitch plate to give you a 2-1/2" hitch for towing or mounting accessories. Fits standard pintle hook mounting hole spacing.
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Powder coated, carbon steel receiver tube bolts onto your cab and chassis truck's hitch plate to give you a 2" hitch for towing or mounting accessories. Fits standard pintle hook mounting hole spacing.
Stow the ball and mounting platform on this dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Designed for use with your GM MultiPro tailgate. Tow up to 18,000 lbs.
This magnetic hitch reducer adapts your 2-1/2" receiver for use with 2" hitch accessories. Slides into your reciver and is held in place by 2 strong magnets. Hitch pin and clip or hitch lock sold separately.
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.
This adapter sleeve with pinched ends lets you use 2" towing and hitch-mounted accessories with your 2-1/2" hitch receiver and stops when flush and holes are aligned. E-coat and black powder coat finishes resist corrosion.
Sturdy steel ball mount with a solid shank measures 13-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.
Powder coated, carbon steel tube welds to your cab and chassis truck to give you a 2" receiver for towing. Can be cut and customized to act as the center section of your fabricated hitch.
This steel, adjustable ball mount lets you tow up to 10,000 lbs with the 2" ball or 15,000 lbs with the 2-5/16" ball. Can be used in 5-1/2" drop or 4-1/2" rise positions. Fits 2" x 2" hitch receivers.
Convert-A-Ball adjustable ball mount is ideal if you will be using 1 vehicle to tow trailers with varying coupler heights. The shank provides a drop of 4-1/4" to 10-1/4" or a rise of 3" to 9". The GTW is 5,000 lbs.
Extend your trailer hitch receiver opening without increasing the vibration in the receiver tube. This 8" adapter has a built-in 3-axis anti-wobble system to provide maximum anti-rattle protection. Includes hitch pin and lock.
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 10,000 lbs with the 2-5/16" ball.
Filters
