Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 10,000 lbs with the 2-5/16" ball.
Features:
Specs:
Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having a 1-7/8" ball, a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.
To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.
Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.
When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.
The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.
A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.
When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we will be reviewing part number BWTS10047C. This is the B&W Tow and Stow 3 ball mount. It is designed to fit 2" by 2" trailer hitches. It is rated at 10,000 pounds. It has a really nice chrome finish on it. The ball mount with the built-in hitch ball is going to get you hook up your trailer to your tow vehicle. The shank simply just slides into the receiver tube of your hitch and then the balls are going to provide good traction points for your trailer coupler.
You can see here that it does have 2 different pin hole locations that are there for your convenience. For our application today we will be using the pin hole that is farthest away from our mounting block. You will also need a hitch pin and clip or a hitch pin and lock. Those items are sold separately. You can refer to the ball mount's product page under related items to view those or go to our web site and type in part number Pc3 and it will refer you to the 5/8" pin and clip that I am using today. One of the best features about this system is that it has a stowable design that lets you store your ball and mounting platform underneath your vehicle.
To take advantage of that, you need to make sure that you do have the flat side facing the ground, like it already is. Then we can remove the 2 pins here on the back, allows it to pivot. Then we can rotate it under, adjust it as needed and then we can reinsert our pins and we will secure it with the clips on the other side. This is going to give you that nice flush flat look at the back of your vehicle. It's also going to increase safety as you maneuver around the rear of your vehicle.
So we can go ahead and bring this back out. Another neat feature is that this system is fully adjustable so you can adjust it up and down and not in platform to fit a wide variety of towing applications. Once we have the desired height set, we just reinsert the pins and secure it with the clips on the other side. So the adjustable height is going to let you tow trailers of different heights with the same vehicle. This does have 3 different size hitch balls. It's going to let you tow trailers with different coupler sizes. To switch between the different size balls, we can just remove the pin and clip and then we can rotate these as needed to best suit our towing application.
Once we have the desired hitch ball fixed, we can go ahead and then reinsert the pin and secure with a clip on the other side. This system has dual process chrome plating on the shank and the hitch balls that's going to help provide excellent rust resistance. The pins are made from stainless steel so that helps create sturdy rust proof traction points. The durable steel construction with the high-yield tubing is also going to offer superior strength. Once again, it is designed to work with 2" by 2" trailer hitch receivers. The different size hitch balls that we have is we have a 1-7/8" ball, a 2" ball, and a 2-5/16" ball. They all provide different towing weight capacities, so the 1-7/8" ball is going to have 3500 pounds of gross towing weight, 2" ball is going to be 7500 pounds, and the 2-5/16" ball is going to be 10,000 pounds. A couple of different measurements that I would like to go over with you right quick. The distance from the center of the hitch pin hole to the center of the hitch ball is going to give us a measurement . I'm measuring from the pin hole that is farthest back on the shank that's inside the receiver tube. So measuring that distance is going to be about 10-1/2" and then if we we're going to switch the pin to the closest point, that measurement is going to decrease to 9-1/4". The distance from the center of the hitch pin hole to the pin holes in the mounting block, again from the farthest out pin hole, is going to give us a measurement of about 5" and then from the closest pin hole, that measurement is going to decrease to 3-3/4". With it installed in the lowest position, if we measure from the inside top of the receiver tube to the ball platform, it is going to give us a maximum drop of 3". You can see the holes here on our adjustable shank. These holes measure center to center 1", so it will adjust in increments of 1". You can also flip this over to the rise position. If you do that, you just need to remove the pin and clip so you can pick whatever hitch ball you need to use for your application and if we measure from the inside top of the receiver tube to the top of the ball platform, it is going to give us a maximum rise of 3-1/2". You will notice that there are 2 different pin holes here. When you have the hitch ball mount in this location, you use the rear pin hole. When you rotate it, you simply line it up with the other pin hole so it just kind of varies back and forth, depending on which mount you are using. That's going to do it for today's review of part number BWTS10047C. This is the B & W Tow and Stow 3 ball mount, rated at 10,000 pounds. .
Average Customer Rating: 4.9 out of 5 stars (4026 Customer Reviews)
Stow the ball and mounting platform on this tri-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 10,000 lbs with the 2-5/16" ball.Heavy duty. Extremely well made. Even came with the grease. Simple to install and looks great! This will make it simple to switch between hauling the trailer, pop up camper and splitter. Oh, and shipping was wonderful!
Best hitch anyone would need. A+
I USED IT ON MY WIFE YUKON ONLY IN THE SUMMER MONTH AND IT REALLY NICE AND I DON'T WANT ANY RUST ON IT I ALSO HAVE A BLACK ONE ON MY WORK TRUCK IT A NICE HITCH LONG AS YOU KEEP THE PINS GREASE
Truly enjoy the quality of the finish used it a few times and my 5,000 trailer has not scratched off the top coat of the 2 5/16" ball like on my other economical tow balls.
Sharp clean look and even come with antitheft design I love!
Nicole answer my questions and she gave me her phone extension if I have any other concerns that she could help me with. Excellent customer service, highly recommend etrailer for all your vehicle and trailer needs
Love the way it looks and how easy it is to use
The product was just what we hoped for---a high quality hitch as a gift for my husband. He was thrilled. Exceeded expectations. The shipping was also above expectation. Will definitely use this company again!
Love the product! High quality and it looks great! The online support was extremely helpful in selecting the right product. Delivery was fast!!!
He really loves it Thank you
Love the style and durability
High Quality Product - very well built! Love the chrome look as well!
Great price, fast shipping and really nice product
You will never need another hitch! EVER
This ball mount is extremely heavy duty. I had a stock class IV hitch and aftermarket ball mount on my Ram 3500 SRW and it was bending towing a 14000 lb dump trailer. I upgraded to a class V hitch and this mount and it's working great. I have 6 trailers that I pull with gooseneck, 5th wheel and ball hitches. The only 1 that uses 1 7/8" ball is a little 5x8 utility trailer that I'm converting to 2" so I got the 2 ball instead of the 3. When turned sideways it works as a step to get into the truck but only if the tailgate is up. It doesn't stick out far enough when the tailgate is open.
The reason for 1 less star is the documentation; you need more information to make the best choice. I originally ordered a different PN and it hung way too low bc is mounted under the existing hitch. To remove the stock hitch, you also remove the integrated mounting brackets for the bumper. I ordered a PN for a truck without a hitch and cut off the receiver tube with a torch. Also, I upgraded the 3 1/2" exhaust to 4" and now at idle the exhaust rattles on the much larger frame of the class V but a slight modification in planned to take care of that. Installation was fairly straighforward once I removed the original receiver tube.
I purchased this hitch for my 2024 GMC Sierra 3500 which has the multiple tailgate. The hitch was in the stow position but still damaged my tailgate when I had the tailgate fully down and used the step feature. it bent the metal and scratched the paint. So please be aware this hitch is not recommended for the 2024 GMC sierra 3500 with multiple tailgate.
Well built product! Excellent construction, durable, functional, will last a long time for sure! Best hitch I have ever owned. Moreover, etrailer sent this to me faster than I could have expected, took only 3 days. Outstaning service, great associates throughout at etrailer! Highly recommend buying this hitch through them if you want it fast and at a superb price!
My hitch arrived on time and packaged up perfectly I was notified along the way so I knew when it would be arriving. Great quality American made product. Looks almost too nice to be a trailer hitch you can tell the company put some time into the design and manufacturing of this hitch. Simple and easy to stow I probably won’t need to buy another hitch for a long long time but if I did it would be another BW hands down
Convenient. One thing bothers me about this hitch, and that’s the noise. It’s very noisy and rattles. I bought anti rattle clamp and the rubber silencers but still makes noise. Also it always looks pointing inward toward the truck, it always catches my attention when I do a walk around.
seems to be well built, haven't used it yet. Thought I would be pulling a pontoon trailer, but it fell through and have never used the tow and stow ball mount.
Solid heavy-duty product - exactly what I expected from a respected US manufacturer. Easy ordering process from etrailer, Lauren in CS was helpful. Video reviews also helped guide my purchase. This was my first order, will be back for more.
I love this hitch. With a locking pin, it stays on my truck all the time. Here’s why:
Height adjustment. This truck was tall when I bought it, so I needed the drop for my trailers to ride level.
3 balls. We have 3 trailers of different sizes and weights, so all 3 balls get used.
And a step! Even when not towing, I use this step to access the bed all the time.
Fits my 3” receiver without an adapter.
Spend the money and you will have no regrets down the road.
This hitch is great, looks sharp, and is very rugged. Only wish was that with my gmc that is equipped with the step fold down gate, i had hoped when the hitch was in the hide away mode(folded up under) that the tailgate would have cleared the hitch, it did not. I dont think it is possible due to thw gate design, but its close.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.