Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has #L44649 inner and outer…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...If you are referring to the 12 volt pin that is located in the 1 o'clock position on the 7-way trailer connector then there should be 12 volt power feeding from the vehicle to the trailer on that pin. This means that if you test the 12 volt wire…
view full answer...That number doesn't give me a cross-reference. To get a replacement you will need to pull the bearings out of the hub and on the face of both the inner and outer bearing there will be a number printed on the bearing face. If you can give me those…
view full answer...The Coach Air Kit for Air Force One Supplemental Braking System part #SM99627 includes the motor home installation components that come with the full kit Air Force One system part #SM99243. Keep in mind the coach air kit is only half the kit of a…
view full answer...SAE numbers aren't part numbers so it's hard to pick out replacement lights based on of them since that's not info that's stored as a cross reference. We've had customers with a similar number SAE-AP2-79 which turned out to be the…
view full answer...The Buyers Products 12-Volt Electric Jack - 22-1/2" Travel - 3,500 lbs #3370093500 has a 20 amp circuit breaker and motor switch between the trailer wiring connection and the motor. I recommend checking the circuit breaker and then the switch…
view full answer...The cold side of the brake switch is located behind your brake pedal. You will need to use a circuit tester like #PTW2993 to test the wires to the switch. There will be a constant power 12v that will come into the switch and the wire you are seeking…
view full answer...For a general-purpose safety chain for a standard gooseneck trailer we offer #337BSC3842 from Buyers Products. This is a 42-inch chain with 3/8-inch clevis. The chain is rated for 15,000 pounds. This is sold as a single chain, not a pair. The 36-inch…
view full answer...I strongly recommend going with a wheel that has a galvanized finish as opposed to just a silver powder coat for the best protection against corrosion. Even if you are going to only use it on a lake - as opposed to salt water - the Steel Mini Mod…
view full answer...Thanks for ordering with us! I see that you purchased the Kenda 215/60-8 Tire/Wheel Combo, #AM3H323. The torque rating for lug nuts on trailer wheels varies depending on the stud size, lug nut type, wheel size and wheel composition. I've attached…
view full answer...The spare tire carrier I recommend is the Fulton Hi-Mount Spare Tire Carrier, part #FHDSTC0101. This carrier will work with the 5 on 4-1/2 bolt pattern of the #AM3H323 tire and wheel combo. This carrier will work with trailer frames 3-inch wide x…
view full answer...Filter Your Search
Contact and Help