Determining Replacement Hub for Boat Trailer with H-1062-1 Printed on Back of Hub

Updated 04/17/2025 | Published 06/28/2020

Products Featured in This Question

Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized

(569)

$59.53

4" Carbon Fiber Digital Caliper

(26)

$12.31

Question:

Need a hub for my 2006 boat trailer. Hub had model number and name on back H-1062-1 UNIQUE UNCTIONAL PRODUCTS

asked by: Curt

Expert Reply:

That number doesn't give me a cross-reference. To get a replacement you will need to pull the bearings out of the hub and on the face of both the inner and outer bearing there will be a number printed on the bearing face. If you can give me those numbers I likely can help you out with the correct replacement. I also will need to know the bolt pattern of your hub if you want to keep the same wheels.

If you can't determine the bearing numbers, then you can use a digital caliper like # PTW80157 on your spindle in the bearing and seal locations and I can help from those dimensions at least 2 places to the right of the decimal.

expert reply by: Jason S

click to enlarge

Geo

5/10/2024

The bearing number is L44649

David

1/13/2025

Was this question ever answered? I also have a UFP H-1062-1 hub and would like to know the replacement.

Kevin C.

1/13/2025

@David It doesn't look like it has, could you measure your spindle at points B, C, and D with a caliper # PTW80157 and I can see what might be a compatible fit?

Ryan

3/6/2025

@KevinC I am looking for the same replacement spindle is 1 1/16 and hub height is 3 in

3/25/2025

@Ryan, did you happen to find a 3”hub? I’m also looking for a replacement for UNIQUE FUNCTIONAL PRODUCTS H-1062-1, looks like it could be 3 3/16” tall, and the shortest I can find is 3 1/2”.