An In-Depth Look at the B and W Tow and Stow 3-Ball Mount Video

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will…

The B&W Tow & Stow 3-Ball Mount #BWTS20049B has a slot cut into the adjustment channel, which you can see in the accompanying photo, that stops the platform from being removed when the ball mount is installed in your hitch receiver.…

If you just wanted to replace the 3 pins on the B&W Tow & Stow ball mount like part #BWTS20049B , you'd use the part #IR57FR. If you also wanted a keyed alike receiver lock to secure the whole shebang into the hitch receiver,…

Yes, you're in need of the Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package #RP30154, which fits the the puck system in the bed of your 2022 Ram 2500 and accepts ISR hitches like your B&W Patriot 5th Wheel Trailer Hitch…

Yes, the Reese 5th Wheel Rail Adapter part #RP30156 add 2-3/4" of height to the truck bed and the Demco 5th Wheel Rail Adapter part #DM6175 only adds 2" of height to the truck bed. Therefore, the Demco 5th Wheel Rail Adapter is what I…

For a cost-effective powered car trailer winch you can consider the Bulldog Winch #BDW15019 which includes a roller fairlead and wire rope. This winch offers a 2-minute duty cycle (15 minutes of cool down time is required between cycles) and with a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The mounting holes on the Buyers Products 5/8" Forged D-Ring With 4-Hole Integral Mounting Bracket #337B40MP you were looking at are 5" apart on center as shown in the included diagram. I included a video of Adam installing the #337B40MP on…

When it comes to the listed specs of a ball mount like the B&W Tow & Stow #BWTS20049B you were looking at the listed rise simply refers to the height from the top of the shank up to the ball platform when it's in the rise position. Most…

The Curt Trailer Hitch Receiver part #C15860 which is a fit for a 2013 GMC Sierra 2500/3500 will not affect the backup sensors. It does not stick out far enough to trigger said sensors so there will be no issues there. That said, whatever you attach…

In regards to the Flash Solid Steel HD Adjustable 2-Ball Mount part #FA49-00-5925, the distance from the top of the shank to the bottom of the vertical adjustment shaft is 13-1/2". I have attached a photo below.

I'm not sure if you're looking for rise or drop but the #FA49-00-5925 is the closest to 8" for the Flash Solid Steel HD. The only other option would be on the low side which is #FA49-00-5625. This has a 6" drop and 7" rise. If…