Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3

Updated 05/22/2024 | Published 02/03/2021

Products Featured in This Question

Replacement Trailer Hub Bearing - L44649

(2119)

$21.63

Grease Seal

(751)

$11.26

Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2

(883)

$105.48

Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy

(390)

$20.89

Question:

Hi, I’m looking for 2x UFP H1062-3 boat trailer hub kit. Do you have this items? Thks

asked by: Nuno

Expert Reply:

The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has # L44649 inner and outer bearings, and a grease seal that has a 1.979" OD and a 1.372" ID, like part # BB60005.

You will need to choose the hub based off those bearings and the bolt pattern of the hub for your wheels, but the most likely one for a boat trailer of any size is a 5 on 4-1/2" like the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 # 8-258-5UC1. It comes with the # L44649 bearings but the grease seal is incorrect. You will simply need to purchase the Grease Seal Set # 13194 in addition and use it instead of the supplied grease seal as it fits the hub better than the Set # BB60005.

I've linked our entire selection of hubs that use those # L44649 bearings that you can look through if you've got a different bolt pattern.

expert reply by: Erik B

Steven

5/22/2024

Hi Erik, I have the same UFP H-1062 hubs, so I ordered the parts you listed. The new hubs are 1" taller and don't work; my UFP H-1062 is a "short" hub and is only a little over 3" wide.