18" Long x 2" wide. Alternating red/white reflector tape makes your truck or trailer more visible in low light. 7" White/11" red pattern. Industrial-strength adhesive backing for easy mounting. 4 Strips included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Aiden here with etrailer, and today we're gonna be taking a look at this conspicuity tape from Peterson. It's gonna be a reflective tape for your trailers, and depending on your local laws, you always wanna check those, this is required for safe hauling, and just to increase visibility on your trailer. We're gonna be showing you how to remove and replace a strip of this. These come in a kit of four strips, so if you're going to replace one on your trailer, it's gonna be great for you. So right here is the piece on our trailer that's certain to come up, so we're gonna go ahead and remove this and replace it with a new strip. The one we have today is 18" long from end to end, so it's a bit longer than our strip right here that's coming apart, but we can line up this white edge pretty okay right here and this'll make a solid replacement just to make sure we're still staying compliant with our local laws.
Just gonna go ahead and set that to the side and peel this one off right here. So we've got our surface mostly clean here, peeled back as much of the sticker as we could. It's pretty strong adhesive, so there is gonna be some residue left, but we'll come back through here, spray it down with some cleaning solution and get the surface as clean as we can with what we have left. Then we'll come back through with a fresh shop towel and make sure everything is perfectly dry here, because we don't want any moisture getting trapped underneath. Once you're happy with how clean the surface is, you can get your new reflective tape sticker.
We've got a strip here in the middle where we can peel back the backing very carefully there and line it up as best we can. We want this to go all the way to the edge and be level throughout. So right about there looks good. We'll try to stick that down as flat as we can and come back through with a tool here to try and remove any sort of air bubbles we might have underneath, again, just to make sure that that adhesive is sticking nice and strong to the side of our trailer. I will come back through with a grader knife here.
There's a little gap right there between the panels of our trailer. So I'm just gonna do a very careful slit down the side right there, just to make sure it's flat right there between the panels and then they can come back and peel the rest of the backing off and repeat that process of carefully applying that to the trailer here, making sure it stays level throughout. As far as replacing that reflective tape goes, that's about all there is to it. If you are doing this along the whole length of your trailer, maybe you've got a new trailer that you're setting up or rebuilding one, I would recommend maybe going with the large rolls of this tape that you can get, and cut to your exact length. That's gonna be better for larger applications like a whole trailer, but if you're just replacing, this is gonna do the trick just fine.
That'll do it. Thanks for watching..
Average Customer Rating: 4.8 out of 5 stars (65 Customer Reviews)
18" Long x 2" wide. Alternating red/white reflector tape makes your truck or trailer more visible in low light. 7" White/11" red pattern. Industrial-strength adhesive backing for easy mounting. 4 Strips included.I cut them in smaller strips to fit on luggage carrier. I put the on the bottom (for when the carrier is folded up) and on the and on the rear (for when the carrier is in use). Very easy to apply. Looks great. Will use some on my bike rack also.
A little pricey wherever you find these, but tons of uses where you need extra visibility. I used it on the rear of my utility trailer and to hillbilly some rusty chrome on the rear shocks of my classic Honda trail bike!
These are superior to those I ordered on [online]. These were put on and have not come off. The quality is great.
fit my van perfectly and the quality of the build and finish was excellent
Fit perfectly on our cargo carrier frame. No problems.
Good quality and stuck well to the trai ler
- NEGATIVE
Extra bright. Illuminates trailer where there is no sidemarkers.
Highly reflective, extremely easy install. My trailer isn't very reflective so this makes it a LOT more visible at night for very little money and very little effort. Good stuff.
It was folded in half a crease right in the middle I am not sure if Will have a bubble or not
Excellent!
Easy to use good quality
Great product!!!
Worked Great, Added them to a motorcycle trailer I am building..
Not the first product I’ve purchased from e-trailer. Always a great experience.
Everything was as expected. Easy to ass emble.
Nice product. Quick deliver
Just what i was looking for at a reasonable price.
Exactly what I needed for back of my horse trailer
Expensive for stickers but good quality
Great item. I used it to illuminate camping gear for quick reference at night.
Great so far, I haven't had a chance to install anything yet
Great stickers, very visible
Great Products, Outstanding Customer Se rvice!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.