Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I would be happy to help you with that. I went out to the warehouse and took some measurements of the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC item #3371809065. The distance between the two wings on the top outside edge of the…
view full answer...The Curt #C15803 you referenced is only a fit for 2014-2018 Ram trucks so that isn't the correct fit. Because you have a 34 inch frame, I recommend the Buyers Products Class 5 Service Body Hitch Receiver - 2-1/2" #3373018538 which…
view full answer...It's possible the Lippert Spare Tire Winch with Offset Cable #LC159056 could attach to the studs you have under your RV frame but the studs would need to be 5-1/4 inch apart on center as this has mounting holes that are 5-1/4 inches apart.…
view full answer...As your Castle Rock ST225/75R15 shows 80psi cold that is the pressure that you want to have for your 2021 Starcraft Super Lite 281BH. It sounds like you may have the Load Range E version of the Castle Rock ST225/75R15 Radial Trailer Tire #274-000029…
view full answer...The Trailair Rota-Flex 5th Wheel Pin Box #LC328329 you linked to is a fit for the 1621 bolt pattern pin boxes so it will not fit your Lippert Rhino Box, but you have three other options that will. The first option is the MORryde Cushioned 5th Wheel…
view full answer...According to the linked installation instructions the Curt Trailer Hitch Receiver - Multi Fit #C13900 is compatible with your 2005 Chevy Tahoe LT. You will have to drill out the holes marked A, C, and D on both sides for this application.
view full answer...The Curt Trailer Hitch #C15409 will fit your 2019 Ram 2500 and you will not need to remove your factory hitch; this will fit underneath it. I added a cut out of the linked installation instructions which show that this hitch will fit under the OEM…
view full answer...Yes, but only the rear set of TorkLift Custom Frame-Mounted Camper Tie-Downs will need to be replaced when upgrading to the TorkLift SuperHitch Magnum Trailer Hitch Receiver part #TLD1102-30 from the factory trailer hitch on your 2011 Ram 3500. The…
view full answer...Ths shorter school buses are built on van cutaway chassis. So since your bus is built on a 2002 GMC Savana Cutaway chassis the Buyers Products hitch part #3371801102 that you referenced would fit and work well.
view full answer...Cutaway chassis are hard to fit hitches to since they are installed on motorhomes or cargo vans like yours. Because of that we don't have any custom fit applications although we might have a couple universal type solutions. I spoke to my contacts…
view full answer...Grease Seal #RG06-050 is the replacement part for the Dexter 010-019-00. It is 1.719 inches inner diameter and 2.565 inches outer diameter. It is a fit for 3500 lb axles. This is a confirmed replacement cross-reference.
view full answer...Blue Ox has an easy system for determining the weight capacity of your spring bars, whereas other companies may use measurements or printed capacity to assist. With Blue Ox, there is a 5 dimple system: No dimples means it is rated for up to 350 lbs…
view full answer...Related Searches
Filter Your Search
Contact and Help