Will Class V Trailer Hitch fit 2019 Ram 2500 Without Needing to Remove Factory Hitch

Question

Question:

Hi, I have a 2019 Ram 2500 with the factory hitch but I'd like to add the Class V from Curt. Will this fit without me needing to remove my hitch?

asked by: Kyle

0

Expert Reply:

The Curt Trailer Hitch # C15409 will fit your 2019 Ram 2500 and you will not need to remove your factory hitch; this will fit underneath it. I added a cut out of the linked installation instructions which show that this hitch will fit under the OEM receiver.

This is a Class V hitch with a 2" receiver and it will not require any drilling into your Ram 2500's frame to install. It has a tongue weight capacity of 2,550 lbs and towing capacity of 17,000 lbs.

The Curt Trailer Hitch # C15409 is made in the USA and comes with a lifetime warranty.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 2

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 3

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...

Answer 4

The best image I could find of B&W hitch #BWHDRH25211 was in the instructions and it is a line diagram and not an actual picture. But it shows how the new hitch receiver will be directly beneath the factory receiver on your 2012 Ram 2500/3500.

view full answer...

Answer 5

While we haven't had the opportunity to install the Curt #C15809, Curt #C15704, and Draw-Tite #DT45509 hitches, from what I could see in the photos customers have sent in it looks like the Draw-Tite will actually sit right up next to the bumper…

view full answer...

Answer 6

Hello Michael, I would go with the Curt Trailer Hitch Receiver Custom Fit Class V Commercial Duty 2-1/2" #C15809 (for 2" receiver #C15409). This is a really solid heavy duty option for your 2004 Dodge Ram Pickup with flatbed. One nice thing…

view full answer...

Answer 7

We do have the installation instructions available for the Curt Trailer Hitch Receiver, #C15704. They can be found on the product page, next to a little picture of a wrench. But I have also included a link to the instructions below. Just a few…

view full answer...

Answer 8

You will definitely be able to install the Curt Trailer Hitch Receiver - Class V XD - 2" #C15409 on your 2006 Dodge Ram 2500 yourself without the need for a professional. The reason for that is because no drilling is required to install the…

view full answer...

Answer 9

Based on your picture the linkage from the frame to the sway bar would be in the way for Curt trailer hitch #C15409. But not to worry because there is a hitch that accounts for a Hellwig sway bar for a 2003 Dodge Ram 2500 with factory hitch. It is…

view full answer...

Answer 10

I went out to our warehouse to take a look at the Curt Trailer Hitch Receiver #C15704 referenced in your question. I measured a distance of right at 10 inches from the top of the mounting brackets to the bottom of the hitch receiver. You can take…

view full answer...