Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 60" Wide
(77 reviews)
Price: $293.69
In Stock
Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 60" Wide
Item # 15903
Retail:$518.26
Our Price: $293.69
You Save: $224.57
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (77)
- Q & A (0)
- Photos
CURT Heavy Duty Receiver Hitch - 15903
- 2 Inch Hitch
- 15000 lbs GTW
- 18 - 60 Inch Wide
- Weld-On
- Class V
- CURT
- 1500 lbs TW
- 11-1/2 Inch Drop
This class V universal weld-on trailer hitch receiver with brackets has a 11-1/2" drop and is designed for use on service body trucks and utility body trucks.
Features:
- Universal hitch designed for use on service body trucks and utility body trucks
- Heavy-duty, universal side brackets included
- Adjustable side brackets slide along hitch body to match exactly the width of your vehicle frame before being welded to the hitch
- Black powder coat finish resists rust and corrosion
- Strong, secure weld-on attachment
- Solid construction for maximum strength and safety
- Assembled in the USA
Specs:
- Hitch body width: 60"
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 15,000 lbs
- Maximum tongue weight: 1,500 lbs
- 1/4" Thick brackets
- Side brackets fit frames from a minimum of 18" to a maximum of 60"
- Bracket height produces a drop of 11-1/2" from the vehicle frame
- Limited lifetime warranty
Warning: All welding surfaces must be cleaned to bare metal or weld will not be the required strength and may void the warranty.
15903 Curt Class 5 Universal Weld-on Receiver Hitch and Brackets with 11-1/2" Drop
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Arrived Damaged
Customer Reviews
Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 60" Wide - 15903
Average Customer Rating: 4.8 out of 5 stars (77 Customer Reviews)
This class V universal weld-on trailer hitch receiver with brackets has a 11-1/2" drop and is designed for use on service body trucks and utility body trucks.by: David B03/16/2020
I've had no issues.
by: Brian T03/09/2017
Well built....very good quality welds.
by: Kirk 09/03/2022
by: EAVgirl07/14/2023
It’s beefy and solid. The mounting bracket square holes had to be cut in a smidge and he added two more support bars.. but all in all. My welder said it would tow 11-12 k. Not the 16k I was told. But hey. I’m okay with that. There was a shipping issue which forced me to reschedule a few things, that is the only reason I gave 4 stars. Otherwise I am supper happy with how it turned out.
by: James08/19/2023
Great quality product from Curt . Can be easy installation depending on the application.. mine more difficult because of aluminum alloy frame, so will have to do some reinforcing.
by: Paul10/10/2022
attached this hitch to my 1984 American General 5 ton military truck. Had to do some modification to air lines and drill a few holes but it is perfect for pulling civilian trailers with the M 813.
by: Derrick 09/13/2023
Added (welded) to our diesel pusher Motorhome and have no issues and really no worries while towing whatever we feel we need while camping.
by: Kem03/20/2023
Well, I really respect the fact that they waited for one year before asking for a review, they offer a 2 inch and a 2 1/2 inch receiver the 2 1/2 inch receiver would obviously be a larger rectangle to accommodate a half an inch, the vertical uprights I received had holes pre-cut to accommodate a 2 1/2 inch receiver I ordered a 2 inch receiver, needless to say, there was an abundance of slop, half inch gaps, requiring a lot of fabrication on either side of the vertical uprights, knowing this now, going with the 2 1/2 receiver should have saved a ton of unnecessary fabrication time.
by: Charlie11/28/2023
Exactly what we wanted. Worked perfect on our recent, extended trip to Alaska and back.
by: Rodney07/09/2018
Very happy with this hitch. The size of the end plates matched the frame on our old truck and with the class V weight rating, our old truck can do a few other things around the farm now. Thank you.
by: Chase08/15/2022
I welded this up on my 2004 GMC converted school bus, it worked great with minimal bumper notching
by: Roger 08/31/2023
Great product. Fast delivery
by: Anthony 02/03/2023
Brent was amazing with his attention to detail. He made sure I received the correct hitch and a follow up on my delivery. Thanks again
by: Keith 06/13/2023
Was able to position the hitch where I wanted on a chassis cab and it works great.
by: Aaron 07/08/2023
Great product. Super faster shipping. Excellent customer service
by: Timothy02/16/2023
it was nice product to buy put it was to small had to return it and i order a bigger one thanks etrailer
by: Lg02/12/2023
Heavy duty, wished it would put itself on my motorhome.
by: Dean 05/03/2023
Looks great. Worked well on a diesel pu sher
by: JohnnyFix09/24/2021
This hitch was exactly what was needed for my landscaping customer's small dump body truck. It replaced the original custom hitch with only minor modifications to accommodate the cargo body. I have done considerable work for this customer over many years. No issues reported with this job. All good!! Thanks to Curt and etrailer for great products and stellar service. —
by: Chris09/13/2022
Package arrived on time-there was a good deal of dust in the package but that doesn’t hurt anything-the hitch and pieces are heavy duty.
by: Brian 01/26/2023
You guys are great! Very simple ordering process and great shipping options. The only place I could find one that could be shipped in less than 5 days. Thank YOU!
by: Roland G.04/21/2015
I called to ask what was the inside dimension of the big square and it was said to be 4 1/2" square, that wasn't even close, it was 3 5/8" square.
But I was lucky I needed 3 1/4 square. I'm modifying this to fit my fisher plow bracket so I have a front hitch to use around the yard. Nobody makes one. I own a machine shop so by getting this saves me a lot of work. So by receiving the wrong info I rating you less than EXCELLENT
by: Richard 08/23/2020
The hitch eeceiver I bought is perfect for my RV. What I was even more impressed with was the updates etrailer.com sent as my order processed and shipped. Each step of the way I was updated by employees who accompanied the update with their photos. Very personalized experience. Thank you etrailers.com!
25
77
Show More Reviews
See what our Experts say about this CURT Heavy Duty Receiver Hitch
- How Wide is Curt Universal Weld On Trailer Hitch # 15903The maximum width of the Curt hitch, # 15903, is 60.88 inches. The minimum it can be is 18 inches. This is measured from the inside of one mounting flange to the inside of the other mounting flange. I have included a link to the instructions that show these dimensions.
view full answer... - Crosstube Dimensions for Curt Class V Universal Weld-On Receiver Hitch # 15903I went out to the warehouse to take a look at the Curt Class V Universal Weld-On Receiver Hitch # 15903 referenced in your question. The square cross tube measures 4 inches x 4 inches. The maximum width of the hitch is 60.88 inches, measured from the inside of one mounting flange to the inside of the other mounting flange. This weld-on trailer hitch has a towing capacity up to 15,000 pounds and a tongue weight capacity up to 1,500 pounds. I have attached the written installation details...
view full answer...
- Hitch for 1952 Chevy 3100 Pickup TruckThe only hitch that would work for you is a weld-on such as the Curt # 15903. This is a universal hitch that is a Class V with a 2" receiver and works with frames that are between 18" and 61". I have attached a link to the installation instructions for you to take a look at.
view full answer... - For your application I recommend checking out the Curt Trailer Hitch Receiver # 15903 which is a weld-on installation that can be modified to fit different frame sizes. This is the best option for you to install a hitch on your school bus frame, but I do recommend having the installer take a look at this prior to purchasing so you can have a game plan set in place. I'm also attaching a link to our selection of heavy duty hitch receivers for you to filter through if this one doesn't look...
view full answer... - Recommended Transmission and Engine Cooler for 1998 GMC K1500For your 1998 GMC K1500, I recommend looking at the Derale Combination Transmission and Engine Oil Cooler # D15903. This is a great tube-fin cooler that will keep both the engine and transmission cooler with one compact system. The unit measures 17 inches wide, 12-1/2 inches tall, and 3/4 inch deep, so you will just want to make sure you have enough room between the grille and AC condenser on your truck for it to install. This system includes the 13/16-16 sleeve nut for GM trucks. I have...
view full answer... - Will Derale Combination Transmission and Engine Oil Cooler for GM Vehicles fit my 2006 GMC SavanaTransmission and oil coolers are universal items, save for the fittings. The Derale Combination cooler may work on your van, but you will have to measure the space available in front of your radiator. This dual cooler measures 17 inches wide, 12-1/2 inches tall and 3/4 of an inch deep. If there is enough space for this cooler to fit in front of your radiator then it will work with your vehicle.
view full answer... - Dimensions Of Brackets Included In Curt Class V Weld-On Receiver 15903The mounting plates included with the Curt Class V Universal Weld-On Receiver # 15903 you were looking at are slightly different that the 16" Weld-On Bracket Kit # 4916 you mentioned. Our warehouse measured the # 15903 brackets and they measure 18-1/2" long x 9-3/8" wide overall, 16-1/2" from the bottom of the bracket to the top of the lower notched area, and 11-3/4" from the top of the crosstube hole to the top of the lower notched area as shown in the included diagrams.
view full answer...
- Engine Oil and Transmission Fluid Cooler Recommendation for 2005 Chevy Express VanBest solution would be a combination engine oil and transmission fluid cooler for your 2005 Chevy Express Van like the Derale kit part # D15903. This comes with all the fittings, lines and brackets needed to install in your vehicle. The oil filter fitting is a match for what your van has as well since it's designed for GM applications.
view full answer... - Recommended Trailer Hitch Receiver for 1952 ChevyThe only hitch that would work for you is a weld-on option like the Curt # 15903. This is a Class V hitch with universal fit. It has a 2" receiver and is compatible with frames that are between 18" and 61". I have attached a link to the installation instructions for you to take a look at.
view full answer... - Trailer Hitch Option For BusThere isn't anything specific for your Chevy Mid Bus but there is an option for a universal, adjustable weld-on hitch. For example, if your frame was 18" to a maximum of 60" then you could use the Curt Class 5 Universal Weld-on Hitch w/ Brackets # 15903. I have added a link below to our entire selection of weld-on hitches for you.
view full answer... - Option for Hitch for 2006 Dodge Ram 1500 With Roll Pan BumperI checked all hitches for a 2006 Dodge Ram 1500, and each of them are designed to fit with a standard factory bumper, so there are no options for custom fit options. That means the best alternative that might work is a universal weld-on hitch, the Class V Universal Weld-on Receiver Hitch # 15903. This requires a completely bare metal surface to weld on and is for frames up to 60.88 inches wide. I have added a link below to the installation instructions for you to check out as well.
view full answer... - 2010 Blue Bird All American Bus Trailer Hitch RecommendationThe Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41547 is a custom fit hitch for certain year make models of Ford Super Duty Cab and Chassis trucks. The mounting holes vary in width distance but they are all about 31" apart on center, and the top of the receiver to the vehicle frame will be about 6-1/2". Since you're looking to install a hitch on a bus I recommend looking into a universal heavy duty hitch receiver like the Curt # 15903. This is a weld-on installation that a shop can...
view full answer... - Best Heavy Duty Trailer Hitch for a 2007 Ford E-450For a trailer hitch with a 10,000 gross trailer weight towing capacity that will fit your 2007 Ford E-450, I recommend the Class V Universal Weld-on Receiver Hitch part # 15903. This hitch as the title states is a universal option that will fit frame rails spaced between 18" to 60" apart so your 43" rail spacing will not be a problem whatsoever. It also has a greater towing capacity than you need, 15,000 lbs which is never a bad thing. Please note that in order to install this trailer...
view full answer... - What High-Capacity Hitch do You Recommend for My 2001 Fleetwood Discovery Motorhome? If you have a 51-inch wide frame (from left to right) on your 2001 Fleetwood Discovery Motorhome, we do have options. For the closest weight capacity to your required 10,000 pound capacity (without going under), I recommend the Class V Universal Weld-on Receiver Hitch # 15903. Since this hitch fits frame between 18-61 inches long, it is perfect for the width of your frame. The only other lighter capacity hitches we carry do not accommodate your 51-inch wide frame. This hitch does have a...
view full answer... - Recommended Hitch For A 2021 Ford Transit 350 Cutaway ChasisWhen it comes to your 2021 Ford Transit 350 Cutaway Chasiss we do not have any front mount hitches or custom trailer hitches for your Ford Transit. The Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2 inch Receiver - 60 inch Wide # 15903 is a universal weld on hitch. It has adjustable side brackets that slide along the hitch body to match exactly where you want to weld the hitch. The hitch has a black powder coat finish that resists rust and corrosion. I attached a review video...
view full answer... - Trailer Hitch For A 2001 Ford E450 Super Duty Cut Away Ambulance The Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2 inch Receiver # 15903 will work on your 2001 Ford E450. The trailer hitch has a black powder coated finish that helps resist rust and corrosion. It has a strong, secure weld-on attachment. The maximum gross trailer weight is 15,000 pounds and it has a maximum tongue weight up to 1,500 pounds. I would recommend checking your vehicle's manual to find the proper towing capacity of your vehicle. The side brackets fit frames from a...
view full answer... - Recommended Oil and Transmission Coolers on 2009 GMC Sierra 6.6L DieselOn your 2009 GMC Sierra with a 6.6 L Diesel I suggest the Derale Combination Cooler # D15903. This is both a transmission and engine oil cooler in one so you won't have to install two coolers. I've linked an install video that will show you the process.
view full answer... - Upgrading Hitch Capacity for 2007 Monaco Signature SeriesWe can get you a higher capacity hitch, though please keep in mind that your towing capacity is going to be limited to the lowest-rated component. So if your 2007 Monaco Signature Series only has a 12,500 lb towing capacity that would be the most you could tow even with a higher-rated hitch. As for the Super Titan 4000 # 38124 it cannot be modified in order to fit your '07 Monaco nor would you want to use spacers to try and make it fit. This hitch was designed for frame widths of 34-1/2"...
view full answer... - Best Engine Oil and Transmission Cooler for a 2009 Chevrolet Tahoe with the 5.3L V8 EngineThe Derale Combination Transmission and Engine Oil Cooler for GM Applications part # D15903 does not have a class rating. The class ratings are a guide that we use to help consumers pick the correct transmission cooler for their towing setup. They are not used by the manufacturer but I would say the above cooler is a class IV which will be more than suitable for your 2009 Chevrolet Tahoe with the 5.3L V8 engine. In regards to installation, you will need to use the included plastic rods,...
view full answer... - Recommended Receiver Hitch for Class C Motorhome on 2003 Ford E-450 ChassisWe don't offer a bolt-on hitch that would offer the capacity you're looking for, but we do offer some weld-on options that would get you where you need to be. In order to choose the correct hitch, you'll need to determine the amount of drop you need by measuring the vertical distance between the underside of the frame members and the lowest point of the rear bumper. You'll want to choose a hitch with a drop greater than your measurement. For a 3 inch drop, use # 15901, if that's not enough,...
view full answer... - Recommended Weld On Universal Fit Class 5 Trailer Hitch for BlueBird All American Bus Diesel PusherFor your BlueBird School Bus conversion, there isn't a specific confirmed fit Class 5 trailer hitch receiver. The universal fit weld on hitch is your best option. The Class V Universal Weld-on Receiver Hitch # 15903 you asked from is a great option as is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41991-07. Both of these will have a 2 inch receiver opening. These hitches will need to be welded bare metal to metal for the correct strength....
view full answer... - Solution for Trailer Hitch Receiver on 2019 E-450 Cutaway With Lift GateTypically the solution for your 2019 E-450 Cutaway is a universal hitch like the Curt # 15903 you looked at. With the liftgate you will have to figure out if it will fit or not based on the placement and design of the liftgate. Some have too many parts in the way and others may have room for a hitch installation. If you aren't sure i recommend talking to a certified welder or fabricator to see if this is possible based on the position of your liftgate. You could also have a custom hitch...
view full answer... - Determing Maximum Towing Capacity Of a 2023 Ford F-53 Chassis On a Class A RV MotorhomeYou will need to verify your maximum trailer weight based on the GVWR for your 2023 Ford F-53 chassis. This information is straight from the Ford Trailer and Towing guide which lines out the maximum trailer weight based on the GVWR for your chassis. GVWR GCWR Trailer Weight 16,000 lbs. 23,000 lbs. 7,000 lbs. 18,000 lbs. 23,000 lbs. 5,000 lbs. 20,500 lbs. 26,000 lbs. 5,500 lbs. 22,000 lbs. 26,000 lbs. 4,000 lbs. 24,000 lbs. 30,000 lbs. 6,000 lbs. 26,000 lbs. 30,000 lbs. 4,000...
view full answer... - Availability Of Trailer Hitch Receiver For 2016 Ford T250 Cab and ChassisI may have an option for you, but we do not have a custom fit trailer hitch receiver confirmed to fit your 2016 Ford T250 cab and chassis. The only option would be to have a universal hitch like the Class V Universal Weld-on Receiver Hitch # 15903 fit to your frame and welded to the frame of your T250. The # 15903 fits frames that are 18" - 60.88" wide so you will need to measure your frame to verify it falls within this range. This hitch has a 1500lb tongue weight rating, and 15000lb...
view full answer...
Do you have a question about this Heavy Duty Receiver Hitch?
Info for this part was:
Expert Research:
Michael H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Manda E
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.